Chapter Note 59
- Document type
- Other
- Dated
- Category
- Chapter Notes
Impregnated, coated,covered or laminated textile fabrics; textile articles of a kind suitable for industrical use
Notes:
(a) Textile fabrics, impregnated, coated, covered or laminated with plastics, whatever the weight per square metre and whatever the nature of the plastic material (compact or cellular), other than:
(2) Products which cannot, without fracturing, be bent manually around a cylinder of a diameter of 7mm, at a temperature between 15 degree cel. and 30 degree
cel. (usually Chapter 39);
(3) Products in which the textile fabric is either completely embedded in plastics or entirely coated or covered on both sides with such material, provided that such coating or covering can be seen with the naked eye with no account being taken of any resulting change of colour (Chapter 39);
(4) Fabrics partially coated or partially covered with plastics and bearing designs resulting from therse treatments (usually Chapters 50 to 55, 58 to 60);
(5) Plates, sheets or strip of cellular plastics, combined with textile fabric is present merely for reinforcing purposes (Chapter 39); or
(6) Textile products of heading No. 58.11;
(a) Textile fabrcis impregnated, coated, covered or laminated with rubber,
(ii) Weighing more than 1,500 g/m square and containing more than 50% by weight of textile material;
(c) Fabrics composed of parallel textile yarns agglomerated with rubber, irrespective of their weight per suqare metre.
This heading does not, however, apply to plates, sheets or strip of cellular rubber, combined with textile fabric, where the textile fabric is present merely for reinforcing purposes (Chapter 40), or textile products of heading No. 58.11.
(b) Fabrics pained with designs (other than painted canvas being theatrical scenery, studio back-cloths or the like);
(c) Fabrics partially covered with flock, dust, powdered cork or the like and bearing designs resulting from these
treatments; however, imitation pile fabrics remain classified in this heading;
(d) Fabrics finished with normal dressings having a basis of amylaceous or similar substances;
(e) Wood veneered on a backing of textile fabrics (heading No. 44.08);
(f) Natural or artificial abrasive powder or grain, on a backing of textile fabrics (heading No. 68.05);
(g) Agglomerated or reconstituted mica, on a backing of textile fabrics (heading No. 68.14); or]
(h) Metal foil on a backing of textile fabrics (Section XV).
(b) Transmission or conveyor belts of belting of textile fabric impregnated, coated, covered or laminated, with rubber or made from textile yarn or cord impregnated, coated, covered or sheathed with rubber (heading No. 40.10).
(a) Textile products in the piece, cut to length or simply cut to rectangular (including
square) shape (other than those having the character of the products of heading Nos. 59.08 to 59.10), the following only:
(ii) Bolting cloth;
(iii) Straining cloth of kind used in oil presses or the like, of textile material or of human hair;
(iv) Flat woven textile fabrics with multiple warp or weft, whether or not felted, impregnated or coated, of a kind used in machinery or for other technical purposes;
(v) Textile fabrics reinforced with metal, of a kind used for technical purposes;
(vi) Cords, braids and the like, whether or not coated, impregnated or reinforced with metal, of a kind used in industry as packing or lubricants materials;
(Above Chapter Note has been amended vide BUDGET 2001-2002)