Skip to main content

Notification · Customs

Notification No. 82/2026-Customs (N.T), DT. 12/10/2026

Dated
12 Oct 2026
Reference no.
82/2026-Customs (N.T)

Customs Tariff (Determination of Origin of Goods under the Free Trade Agreement between India and NewZealand) Rules, 2026.

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II,

SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA

MINISTRY OF FINANCE

(DEPARTMENT OF REVENUE)

(CENTRAL BOARD OF INDIRECT TAXES AND CUSTOMS)

Notification No. 82/2026 -Customs (N.T.)

New Delhi, the 12th October, 2026.

G.S.R. (E).- In exercise of the powers conferred by sub-section (1) of section 5 of the Customs Tariff Act, 1975 (51 of 1975), the Central Government hereby makes the following rules, namely: -

1. Short title and commencement. - (1) These rules may be called the Customs Tariff (Determination of Origin of Goods under the Free Trade Agreement between India and New Zealand) Rules, 2026.

(2) They shall come into force on the 20th October, 2026.

2. Definitions. – (1) In these rules, unless the context otherwise requires, -

(a) “Agreement” means the Free Trade Agreement between India and New Zealand signed on the 27th April, 2026;

(b) “Annexure” means the annexures appended to these rules;

(c) “aquaculture” including, but not limited to mariculture, means the farming of aquatic organisms including fish, molluscs, crustaceans, other aquatic invertebrates and aquatic plants from seed stock, including seed stock imported from non-parties, such as eggs, fry, fingerlings, or larvae, by intervention in the rearing or growth processes to enhance production such as regular stocking, feeding, or protection from predators;

(d) “CIF value” or “Cost, Insurance and Freight value” means the price actually paid or payable to the exporter for a good when the good is loaded out of the carrier, at the port of importation, including the cost of the good, insurance, and freight necessary to deliver the good to the named port of destination;

(e) “competent authority” means:

(i) for India, the Department of Commerce or its successors; and

(ii) for New Zealand, New Zealand Customs Service or its successors;

(f) “customs administration” means:

(i) for India, the Central Board of Indirect Taxes and Customs or its successors; and

(ii) for New Zealand, the New Zealand Customs Service or its successors;

(g) “FOB value” or “Free-On-Board value” means the price actually paid or payable to the exporter for a good when it is loaded onto the carrier at the named port of exportation, including the cost of the good and all costs necessary to bring the good onto the carrier;

(h) “fungible goods” means goods that are interchangeable for commercial purposes and whose properties are essentially identical;

(i) “Generally Accepted Accounting Principles” means those principles recognised by consensus or with substantial authoritative support in the territory of a Party with respect to the recording of revenues, expenses, costs, assets and liabilities; the disclosure of information; and the preparation of financial statements. These principles may encompass broad guidelines for general application, as well as detailed standards, practices and procedures;

(j) “indirect materials” means a material used in the production, testing or inspection of a good but not physically incorporated into the good; or a material used in the maintenance of buildings or the operation of equipment, associated with the production of a good, including:

(i) fuel, energy, catalysts and solvents;

(ii) equipment, instruments, devices and supplies used to test or inspect the good;

(iii) gloves, glasses, footwear, clothing, safety equipment and supplies;

(iv) tools, dies and moulds;

(v) spare parts and materials used in the maintenance of equipment and buildings;

(vi) lubricants, greases, compounding materials and other materials used in production or used to operate equipment and buildings; and

(vii) any other material that is not incorporated into the good but the use of which in the production of the good can reasonably be demonstrated to be a part of that production;

(k) “issuing authority” means the authority designated by each Party for issuance of Certificates of Origin, as notified from time to time;

(l) “material” means a good that is consumed in the production, physically incorporated or used in the production of another good;

(m) “non-originating material” means a material that does not qualify as originating in accordance with these rules, which includes a good or material of undetermined origin;

(n) “originating good” or “originating material” means a good or material that qualifies as originating in accordance with these rules;

(o) “packing materials and containers for transportation and shipment” means goods used to protect another good during its transportation, but does not include the packaging materials or containers in which a good is packaged for retail sale;

(p) “producer” means a person who engages in the production of a good;

(q) “production” means operations including growing, cultivating, raising, mining, harvesting, fishing, trapping, hunting, capturing, collecting, breeding, extracting, aquaculture, gathering, manufacturing, processing or assembling a good;

(r) “Party” means India or New Zealand and jointly as the Parties;

(s) “preferential tariff treatment” means the customs duty rate applicable to an originating good, pursuant to each Party’s respective Schedule of Tariff Commitments set out in Annex 2A (Schedule of Tariff Commitments);

(t) “QVC” is the qualifying value content of a good, expressed as a percentage;

(u) “value of non-originating materials” is the value of non-originating materials, including materials of undetermined origin, used in the production of the good; and

(v) “value of originating materials” is the value of originating materials used in the production of the good in the territory of one or both Parties.

(2) For the purpose of these rules, any cost or value shall be recorded and maintained in accordance with the Generally Accepted Accounting Principles applicable in the territory of the Party in which the good is produced.

3. Originating Goods.- Except as otherwise provided in these rules, a good shall be regarded as originating if it is --

(a) wholly obtained or produced in the territory of one or both of the Parties, as provided for in rule 4; or

(b) satisfies all applicable requirements of the Product Specific Rules under

Annexure A; and
meets all other requirements of these rules.

4. Wholly Obtained or Produced Goods.- For the purposes of clause (a) of rule 3, the following goods shall be considered to be wholly obtained or produced in the territory of one or both of the Parties, if they are --

(a) plant and plant goods, including fruit, flowers, vegetables, trees, seaweed, fungi, algae and live plants grown and harvested, picked, or gathered there;

(b) live animals born and raised there;

(c) goods obtained from live animals born and raised there;

(d) goods obtained by hunting, trapping, fishing, aquaculture, gathering, or capturing there;

(e) minerals and other naturally occurring substances, not included in clauses

(a) to (d), extracted or taken from the soil or waters, seabed or subsoil beneath the seabed there;

(f) fish, shellfish, and other marine life extracted or taken from the sea, seabed or subsoil beyond the outer limits of the territories of each Party and, in accordance with international law, outside the territorial sea of non-Parties by vessels that are registered, listed or recorded with a Party and entitled to fly the flag of that Party;

(g) goods produced on board a factory ship registered, listed or recorded with a Party and entitled to fly the flag of that Party from the goods referred to in clause (f);

(h) goods other than fish, shellfish and other marine life extracted or taken from the sea-bed or subsoil beneath the sea-bed outside the territorial sea of a Party, provided that the Party has rights to exploit such sea-bed or subsoil beneath the sea-bed in accordance with relevant international law;

(i) waste and scrap, excluding precious metals, derived from production or consumption there, provided that such goods are fit only for the recovery of raw materials; and

(j) goods produced in the territory of one or both Parties solely from goods referred to in clauses (a) to (i) or from their derivatives at any stage of production.

5. Bilateral Cumulation.- Each Party shall provide that an originating good or material in the territory of one Party, under rule 3 and all the other applicable requirements of these rules, that is incorporated in the production of a good in the territory of the other Party is considered to originate in the territory of the other Party.

6. Calculation of Qualifying Value Content.- Where a qualifying value content requirement is specified in these rules and its Annexures, to determine whether a good is originating, the qualifying value content shall be calculated using one of the following methods:

(a) Build-Down Formula based on the value of non-originating materials: QVC =
FOB Value − Value of non originating materials FOB Value
x 100

(b) Build-up Formula based on the value of originating materials:

QVC =
Value of originating materials
FOB Value
x 100

7. Value of Materials Used in the Qualifying Value Content.- (1) All values for the purposes of calculating qualifying value content shall be determined in accordance with the Customs Valuation Agreement.

(2) All costs shall be recorded and maintained in conformity with the Generally Accepted Accounting Principles applicable in the territory of a Party where the good is produced.

(3) If a non-originating material is used in the production of a good, the following may be added to the value of originating materials in determining whether the good meets the QVC requirement:

(a) the value of production of non-originating materials undertaken in the territory of one or both Parties; and

(b) the value of originating materials used in the production of the nonoriginating material in the territory of one or both Parties by one or more producers.

(4) The value of the materials used in production shall be:

(a) for imported materials, the CIF value;

(b) for materials obtained within the territory of a Party:

(i) the price paid or payable by the producer in the Party where the producer is located;

(ii) the value as determined for an imported material in clause (a); or

(iii) the earliest ascertainable price paid or payable in the territory of the Party; and

(c) for materials that are self-produced, all the costs incurred in the production of the material, which includes general expenses that can be reasonably allocated to the good.

(5) For originating materials, the following expenses may be added to the value of the material, if not included under sub-rule (4):

(a) the costs of freight, insurance, packing, and other transport-related costs incurred in transporting the good to the location of the producer of the good;

(b) duties, taxes, and customs brokerage fees on the material, paid in the territory of a Party, other than duties that are waived, refunded, refundable, or otherwise recoverable, which includes credit against duty or tax paid or payable; and

(c) the cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of reusable scrap or by-product.

(6) For non-originating materials or materials of undetermined origin, the following expenses may be deducted from the value of the material:

(a) the costs of freight, insurance, packing, and other transport-related costs incurred in transporting the material within the territories of the Parties to the location of the producer of the good;

(b) duties, taxes, and customs brokerage fees on the material, paid in the territory of a Party, other than duties that are waived, refunded, refundable, or otherwise recoverable, which includes credit against duty or tax paid or payable; and

(c) the cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of reusable scrap or by-product.

(7) Where the costs or expenses listed in sub-rules (4) through (6) are unknown or evidence of the amount of the adjustment is not available, then no adjustment is allowed for those costs.

8. Minimal Operations.- (1) Notwithstanding any provisions of these rules, the following operations when undertaken on non-originating materials to produce a good shall be considered as insufficient working or processing to confer on that good the status of an originating good:

(a) preserving operations to ensure that the good remains in good condition for the purposes of transport or storage;

(b) packaging or presenting goods for transportation or sale;

(c) simple
processes, consisting of sifting, screening, sorting, classifying, sharpening, cutting, slitting, grinding, bending, coiling, or uncoiling;

Explanation: For the purposes of this rule, “simple” describes activities which need neither special skills nor machines, apparatus or equipment specially produced or installed for carrying out the activity;

(d) for textiles: attaching accessory articles such as straps, beads, cords, rings and eyelets; ironing or pressing of textiles;

(e) affixing or printing of marks, labels, logos, or other like distinguishing signs on goods or their packaging;

(f) simple dilution with water or another substance that does not materially alter the characteristics of the good;

(g) simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;

(h) slaughtering
of animals;

Explanation: For the purposes of this rule, “slaughtering” means the mere killing of animals;

(i) simple painting and polishing operations;

(j) simple peeling, stoning, or shelling;

(k) simple mixing of goods, whether or not of different kinds; or

Explanation: For the purposes of this rule, “simple mixing” describes activities which need neither special skills nor machines, apparatus or equipment specially produced or installed for carrying out the activity;

(l) any combination of two or more operations referred to in clauses (a) to (k).

(2) All operations carried out in a Party on a given good shall be considered together when determining whether the working or processing undergone by that good is to be regarded as insufficient within the meaning of sub-rule (1).

9. De Minimis.- (1) A good, except for those falling within Chapters 50 through 63 of the Harmonised System, that does not satisfy a change in tariff classification requirement pursuant to Annexure-A shall nonetheless be an originating good if the value of nonoriginating materials used in the production of the good that does not satisfy the change in tariff classification requirement does not exceed 10 per cent of the FOB value of the good as defined under rule 2 and the good meets all of the other applicable requirements in these rules.

(2) A good classified in Chapters 50 through 63 of the HS that does not qualify as originating good because certain non-originating materials used in the production of the good do not fulfil the requirements set out in Annexure-A, shall nonetheless be an originating good if the total weight or value of all such material does not exceed 10 per cent of the total weight or value of that good.

(3) If a good described in sub-rule (1) or (2) is also subject to a qualifying value content requirement, the value of those non-originating materials shall be included in the value of non-originating materials for the applicable qualifying value content requirement.

(4) A good classified as Wholly Obtained (WO) under rule 4 or Annexure-A that does not qualify as an originating good, because certain non-originating materials of other chapters of the Harmonised System are used in the production of that good, shall nonetheless be an originating good if the total weight or value of all such non-originating material does not exceed 1 per cent of the total weight or value of that good.

10. Treatment of Packaging Materials and Containers for Retail Sale.- (1) Packaging materials and containers in which a good is packaged for retail sale, if classified with the good, shall be disregarded in determining whether the non-originating materials used in the production of the good have satisfied the applicable process or change in tariff classification requirement set out in Annexure-A, or whether the good is wholly obtained or produced.

(2) If the good referred to in sub-rule (1) is subject to the qualifying value content requirement, the value of such packaging materials and containers shall be taken into account as value of the originating or non-originating materials, as the case may be, in calculating the qualifying value content of the good.

11. Treatment of Packing Materials and Containers for Transportation and Shipment.- Packing materials and containers for transportation and shipment of a good shall not be taken into account in determining whether the good is originating.

12. Accessories, Spare Parts and Tools.- (1) The origin of the accessories, spare parts or tools presented with a good:

(a) shall be disregarded if the good is subject to a change in tariff classification requirement or production process requirements for origin specified in

Annexure-A, and

(b) shall be taken into account as originating or non-originating materials, as the case may be, in calculating the qualifying value content of the good, if the good is subject to a qualifying value content requirement.

(2) Sub-rule (1) shall only apply where:

(a) the accessories, spare parts, tools and instructional or other information materials presented with the good are not invoiced separately from the originating good; and

(b) the quantities and value of the accessories, spare parts, tools and instructional or other information materials presented with the good are customary for that good.

13. Indirect Materials.- An indirect material shall be considered as neither originating nor non-originating when the qualifying value addition is calculated in accordance with rule 6.

14. Fungible Goods.- (1) Fungible goods shall be treated as originating based on the:

(a) physical separation of the good; or

(b) use of any inventory management method recognised in the Generally Accepted Accounting Principles of the Party where the production is performed, if originating and non-originating fungible goods are comingled, provided that the inventory management method selected is used throughout the fiscal year of the person that selected the inventory management method.

(2) An inventory management system under clause (a) of sub-rule (1) must ensure that no more goods or materials receive originating status than would have been the case if the fungible goods had been physically segregated.

15. Consignment.- (1) A good shall retain its originating status as determined under rule 3 if either of the following conditions have been met:

(a) the good has been transported directly from the exporting Party to the importing Party; or

(b) the good has been transported through one or more non-Parties provided that the good has not undergone any subsequent production or other operation outside the territories of the Parties other than unloading, reloading, storing, repacking, relabelling in accordance with the laws and regulations of the importing Party, splitting up of loads, consolidation of loads or any other operation necessary to preserve it in good condition or to transport the good to the territory of a Party and the good has remained under customs control in the non-Parties.

(2) Compliance with clause (b) of sub-rule (1) shall be evidenced by presenting the customs administration of the importing Party either with customs documents of the non- Parties, or with any other appropriate documentation on request of the customs administration of the importing Party.

(3) Appropriate documentation referred to in sub-rule (2) may include commercial shipping or freight documents such as airway bills, bills of lading, multimodal or combined transport documents, a non-manipulation certificate, or other relevant supporting documents as may be requested by the customs administration of the importing Party.

16. Proof of Origin.- (1) Each Party shall provide that a claim for preferential tariff treatment is based on an applicable Proof of Origin:

(a) a Certificate of Origin issued by an issuing authority; or

(b) an origin declaration completed by:

(i) in India, a status holder;

(ii) in New Zealand, an approved exporter; or

(iii) subject to a review under sub-rule (12), an exporter or producer.

(2) A Certificate of Origin shall bear an authorised signature and official seal of the issuing body or authority, as appropriate. The signature and seal shall be applied manually or electronically.

(3) A Proof of Origin shall:

(a) be in the English language;

(b) bear a unique certification number or unique identification number, as the case may be;

(c) specify that the good is originating and meets the requirements of these rules;

(d) contain information as set out in Annexure-B for Certificate of Origin and as set out in Annexure-C for an origin declaration by an approved exporter or status holder;

(e) remain valid for 12 months from the date on which it is completed in the case of an origin declaration or issued in the case of a Certificate of Origin; and

(f) apply to single importation of one or multiple goods provided that each good qualifies as an originating good separately in its own right.

(4) For New Zealand, a Proof of Origin may apply to importations of multiple shipments of identical goods within any period specified in the Proof of Origin, where such period does not exceed 12 months.

(5) A Proof of Origin may indicate two or more invoices for goods contained in a single importation.

(6) Proof of Origin shall be submitted to the customs administration of the importing Party in accordance with the procedures applicable in that Party.

(7) A Proof of Origin shall be forwarded by the exporter, producer, approved exporter, or status holder to the importer. The customs administration may require the original copy.

(8) Neither erasures nor superimposition shall be allowed on a Proof of Origin. Any alterations shall be made by striking out the erroneous material and making any addition(s) that may be required. In case of Certificates of Origin, such alterations may be approved by a person authorised to issue the certificate. In case of Origin Declaration, a new Proof of Origin may be completed by the approved exporter or status holder.

(9) Each Party shall provide that a Proof of Origin shall be issued or completed prior to or at the time of importation.

(10) Notwithstanding sub-rule (9), under exceptional circumstances, a Proof of Origin may be issued or completed after importation, bearing the words “ISSUED RETROSPECTIVELY” in the Proof of Origin, and include an explanation to this effect. A Proof of Origin can be issued retrospectively no later than 12 months after the date of importation.

(11) In cases of theft, loss or accidental destruction of a Certificate of Origin, the exporter, producer or an authorised representative thereof may, within the term of validity of the original Certificate of Origin, make a written request to the issuing body or authority that issued the original certificate for a certified copy. The certified copy shall bear the words “CERTIFIED TRUE COPY”. The certified copy shall have the same term of validity as the original Certificate of Origin.

(12) The Parties shall commence a review of this rule on completion of five years from the date of entry into force of this Agreement. This review will consider the introduction of a Declaration of Origin by an exporter or producer as a Proof of Origin.

17. Application for Certificate of Origin.- (1) For the issue of a Certificate of Origin, the exporter or producer of the goods shall present, or submit electronically through the approved channel, to the issuing body or authority of the exporting Party the following:

(a) an application, together with appropriate supporting information and documents for proving origin; and

(b) the corresponding commercial invoice and other documents necessary to establish the origin of the good.

(2) Multiple items declared on the same Certificate of Origin shall be allowed, provided that each item must qualify separately in its own right.

(3) Each Party may, in accordance with its domestic procedures and if it deems appropriate, allow its issuing body or authority to apply a risk management system to selectively conduct pre-export verification of the application and supporting information filed by an exporter or producer.

(4) The issuing body or authority, as appropriate, shall carry out proper examination of each application for a Certificate of Origin to ensure that:

(a) the application has been duly completed and signed by the authorised signatory;

(b) the origin of the good is in conformity with the requirements of these rules; and

(c) the information furnished in the Certificate of Origin corresponds to supporting information and documents submitted.

(5) If the exporter or producer has reason(s) to believe that a Certificate of Origin is based on incorrect information that could affect the accuracy or validity of the Certificate of Origin, they shall be obliged to immediately notify the importer, the issuing body or authority and the customs administration of the importing Party in writing of any change affecting the originating status of each good to which the Certificate of Origin applies.

18. Non-Party Invoicing.- An importing Party shall not deny a claim for preferential tariff treatment for the sole reason that an invoice was not issued by the exporter, producer, approved exporter, or status holder, or was issued in a third country, provided that the goods meet the requirements of these rules.

19. Authorities.- (1) The Certificate of Origin shall be issued by an issuing body or authority, as appropriate.

(2) Each Party shall within 30 days of the date of entry into force of this Agreement inform the customs administration of the other Party of the issuing body or authority, as appropriate, and contact details of the authorised persons of such body or authority, designated to issue Certificates of Origin under this Agreement.

(3) The Parties shall exchange specimen seals and signatures of the authorised signatories issuing Certificate of Origin.

(4) Each Party shall promptly notify the other Party of any change to its issuing body or authority, as appropriate, and the names, designations, addresses, specimen signatures of authorised persons or seals of such issuing body or authority.

20. Status Holder.- (1) The competent authority in India may, subject to its laws and regulations, grant a status holder certificate to an eligible exporter (hereinafter referred to as “status holder”) established in India to self-certify their Origin Declaration, provided that the status holder accepts full responsibility for declaration of origin of the export product.

(2) The competent authority in India shall after a due process grant status holder certificate to an exporter established in India.

(3) The competent authority in India shall maintain a system to monitor the proper use of status holder certificate. The status holder certificate may be withdrawn if the status holder no longer fulfils the requirements or makes improper use of their status holder certificate.

(4) The competent authority in India shall notify the competent authority in New Zealand of their status holders, their certificate numbers, and any modifications to the list of status holders.

21. Approved Exporter.- (1) The competent authority in New Zealand may, subject to its laws and regulations, authorise an eligible exporter (hereinafter referred to as “approved exporter”) established in New Zealand to self-certify their Origin Declaration, provided that the approved exporter accepts full responsibility for declaration of origin of the export product.

(2) The competent authority in New Zealand, after due process, shall grant an authorisation number to an approved exporter operating in New Zealand. The authorisation number must be unique for every approved exporter.

(3) The competent authority in New Zealand shall maintain a system to monitor the proper use of an authorisation. The authorisation may be withdrawn if the approved exporter no longer fulfils the requirements or makes improper use of the authorisation.

(4) The competent authority in New Zealand shall notify the competent authority in India of their approved exporters, their authorisation numbers, and any modifications to the list of approved exporters.

22. Claims for Preferential Tariff Treatment.- (1) Except as otherwise provided in rule 27, each Party shall grant preferential tariff treatment in accordance with these rules to an originating good on the basis of a Proof of Origin.

(2) Unless otherwise provided in these rules, for the purposes of claiming preferential tariff treatment, an importing Party shall provide that an importer:

(a) make a declaration that the good qualifies as an originating good;

(b) have a valid Proof of Origin in its possession at the time the declaration referred to in clause (a) is made and provide the same if requested by the importing customs administration; and

(c) if required by an importing Party, demonstrate that the requirements in rule 15 have been satisfied.

(3) An importing Party may require that an importer who claims preferential tariff treatment shall provide documents and other information to support the claim.

(4) If a claim for preferential tariff treatment is made without producing the Proof of Origin, the customs administration of the importing Party may deny the preferential tariff treatment or request a guarantee in any of its modalities or may take action necessary in order to preserve fiscal interests, as a pre-condition for the completion of importation operations subject to and in accordance with the laws, regulations and procedures of the importing Party.

23. Record Keeping Requirements.- (1) Each Party shall require that:

(a) its exporters, producers, approved exporter, or status holders and issuing bodies or authorities, as appropriate, retain for at least 5 years from the date of issuance or completion of the Proof of Origin or a longer period in accordance with its relevant laws and regulations, all records necessary to prove that the good for which the Proof of Origin was issued was originating; and

Explanation: For greater clarity these records shall include commercial accounting and customs documentation relating to the material(s) used in the production of the good, including but not limited to breakup of costs relating to material(s), labour, other overheads and any other relevant elements such as profits and related components, where these are applicable to the origin criteria.

(b) its importers retain, for at least 5 years from the date of importation of the good, or a longer period in accordance with its relevant laws and regulations, all records necessary to prove that the good for which preferential tariff treatment was claimed was originating.

(2) The original Proof of Origin document must be retained in a hard copy written format. All other supporting records may be maintained in any medium that allows for prompt retrieval, including in digital, electronic or written form, in accordance with that Party’s laws and regulations.

(3) The exporter, producer, approved exporter, or status holders, shall, upon request of the issuing body or authority, of the exporting Party or the customs administration of the importing Party, make available records for inspection to enable verification of the origin of the good.

24. Waiver of Proof of Origin.- A Party shall not require a Proof of Origin if the importing Party has waived the requirement or does not require the importer to present a Proof of Origin in accordance with its law.

25. Post Importation Claim for Preferential Tariff Treatment.- (1) Each Party shall provide for an importer of a Party to apply for preferential tariff treatment and a refund of any excess duties paid for a good if the importer did not make a claim for preferential tariff treatment at the time of importation, provided that the good would have qualified for preferential tariff treatment when it was imported into its territory.

(2) As a condition for preferential tariff treatment under sub-rule (1), the importing Party may require that the importer, not later than 12 months after the date of importation or a longer period if specified in the importing Party’s laws and regulations, to:

(a) make a claim for preferential tariff treatment;

(b) where applicable, provide a copy of Proof of Origin; and

(c) provide such other documentation relating to the importation of the good as the importing Party may require.

(3) Each Party shall provide that if the importer has reason(s) to believe that the claim for preferential tariff treatment is based on incorrect information that could affect the accuracy or validity of the Proof of Origin, the importer shall correct the importation document, and if applicable, pay any customs duty and penalties owed.

(4) When considering imposing a penalty in relation to a claim for preferential tariff treatment, the customs administrations of the Parties are encouraged to consider a voluntary notification given prior to the discovery of that error by the Party as a mitigating factor, provided that in the case of a notification given by an importer, the importer corrects the error and repays any duties owed.

26. Verification of Origin and Procedures.- (1) For the purposes of determining whether goods imported into a Party from the other Party qualify as originating goods, the importing Party may conduct a verification process. A verification process may be initiated on importation or after the release of the goods by the customs administration of the importing Party.

(2) A verification process may be initiated based on risk assessment methods, including random selection, or where the importing Party has reasonable doubt as to the authenticity of the origin of the goods.

(3) A verification process for determining whether a good imported into a Party is originating may include the following methods:

(a) a written request or requests for information from the importer of the good;

Explanation: For the purposes of this rule, where origin has been obtained using a qualifying value content methodology, information shall include breakdown of costs and other relevant elements, such as profit, for the determination of the origin of the good;

(b) a written request or requests for information on a Certificate of Origin from the exporting party;

(c) a written request or requests for information from the exporter, producer, approved exporter, or status holder of the goods, through the competent authority or issuing authority of the exporting Party;

(d) a request to the competent authority of the exporting Party to assist in obtaining information from the exporter, producer, approved exporter or status holder;

(e) a verification visit to the premises of an exporter, producer, approved exporter, or status holder in the territory of the exporting Party, in the normal course of a verification, the Parties shall utilise the methods in a sequential manner.

(4) For the purposes of clause (b) of sub-rule (3):

(a) the customs administration of the importing Party may request the competent or issuing authority, as appropriate, that issued the Certificate of Origin in the exporting Party, to assist it in verifying:

(i) the authenticity of a Certificate of Origin;

(ii) the accuracy of any information contained in the Certificate of Origin; and

(iii) the authenticity and accuracy of the supporting information and documents, associated to the Certificate of Origin, and provide copies of the relevant documents where requested;

(b) the customs administration of the importing Party shall provide the competent or issuing authority, as appropriate, with:

(i) the reasons why such assistance is sought;

(ii) the Certificate of Origin, or a copy thereof; and

(iii) any information and documents as may be necessary for the purpose of providing such assistance; and

(c) the competent or issuing authority in the exporting Party shall provide the information and documentation requested, within:

(i) 30 days from the date of receipt of the request, if the request pertains to the authenticity of issue of the Certificate of Origin, including the seal and signatures of the issuing authority;

(ii) 60 days from the date of receipt of such request, if the request is on the grounds of suspicion of the accuracy of the determination of origin of the product. This period can be extended for up to 30 days, if agreed by the Parties.

(5) Where a written request is made under clause (c) of sub-rule (3):

(a) the customs administration of the importing Party shall ensure that the information requested is limited to information pertaining to the fulfilment of the requirements of these rules as follows:

(i) Proof of Origin;

(ii) information supporting a claim that the good is originating under rule 3;

(iii) information related to the use of the de minimis, direct consignment or cumulation provisions of these rules; and

(iv) any other information including specific documentation where appropriate;

(b) the customs administration of the importing Party shall provide the exporter, producer, approved exporter or status holder, as appropriate, with:

(i) the reasons why information is being sought;

(ii) the Proof of Origin, or a copy thereof; and

(iii) any information and documents as may be necessary for the purpose of providing such information; and

(c) the exporter, producer, approved exporter, or status holder, shall provide the information within 60 days from the date of receipt of a request. This period can be extended for up to 30 days as agreed by the exporter, producer, approved exporter or status holder, and the customs administration of the importing Party.

(6) If the importing Party is not satisfied with the outcomes of the information received after completing the processes identified in clauses (a) through (d) of sub-rule (3) regarding whether the goods qualify as originating goods according to these rules, it may request in writing to the customs administration or competent authority of the exporting Party to seek agreement from the exporter, producer, approved exporter, or status holder of the good to undertake for a verification visit to the premises of the exporter, producer, approved exporter, or status holder to observe the facilities used in the production of the goods concerned, including review of the exporter’s, producer’s, approved exporter’s, or status holder’s accounts, or records in relation to the goods concerned or any other check considered appropriate and related to the purpose of the verification visit.

(7) The written request referred to in sub-rule (6) shall be as comprehensive as possible and include at a minimum:

(a) the name of the exporter, producer, approved exporter or status holder whose premises are to be visited;

(b) the goods subject to the verification process;

(c) reasons why the outcome(s) of the verification activity conducted under clauses (a) through (d) of sub-rule (3) to that date has not been satisfactory; and

(d) proposed date and time of visit.

(8) The request for a verification visit shall be made no later than 30 days and extendable as agreed by the Parties, following the receipt of the information referred to in clauses (a) through (d) of sub-rule (3).

(9) Officials from the exporting Party may accompany and assist the officials from the importing Party in their visit to the exporter, producer, approved exporter, or status holder premises. The exporter, producer, approved exporter, or status holder shall identify two or more independent witnesses to be present during the verification visit. The abovementioned verification visit process, including the actual visit and notification of written determination of the origin of the good, shall be completed within a maximum period of 6 months from the date when the verification visit was conducted.

(10) When the written consent of the exporter, producer, approved exporter, or status holder for the visit is not obtained within 30 days from the date the customs or competent authority of the exporting Party receives the verification visit request, the customs administration of the importing Party may deny preferential tariff treatment to the good that would have been the subject of the verification visit.

(11) During a verification process, the importing Party shall allow the release of the good, subject to payment of duties or provision of security as provided for in its law.

(12) Upon completion of the verification process, the customs administration of the importing Party shall provide the importer with a written determination of whether the good is originating, along with the basis for the determination. If the exporter, producer, approved exporter, or status holder of the good has been involved in the verification process they shall be notified on the outcome of the verification process.

(13) Upon the issuance of the written determination that the good does not qualify as an originating good, the exporter, producer, approved exporter, or status holder shall be allowed 30 days from the date of receipt of the written determination to provide in writing comments or additional information regarding the eligibility of the good for preferential tariff treatment. The final written determination shall be communicated to the exporter or producer or approved exporter or status holder within 30 days from the date of receipt of the comments or additional information.

(14) Upon the issuance of the written determination that the good qualifies as an originating good, the importing Party shall immediately restore preferential benefits and promptly refunded any duties paid in excess of the preferential duty or release guarantees obtained in accordance with their domestic legislation.

27. Denial of Preferential Tariff Treatment.-

(1) The importing Party may deny a claim
for preferential tariff treatment if:

(a) it determines that the good does not qualify as originating within the terms of these rules or does not satisfy the requirement(s) of these rules;

(b) pursuant to a verification under rule 26, it has not received sufficient information to determine that the good qualifies as originating including;

(i) the importer, exporter, producer, approved exporter, or status holder, fails to respond to or refuses a written request for information;

(ii) the importer, exporter, producer, approved exporter, or status holder, fails to comply with any of the relevant requirements for obtaining preferential tariff treatment;

(iii) the importer, exporter, producer, approved exporter, or status holder, or the issuing bodies or authorities, as appropriate, of the exporting Party fail to provide sufficient information and documents, within the prescribed timelines;

(iv) the exporter, producer, approved exporter, or status holder, fails to give consent or respond to a request for a verification visit.

(2) If an importing Party denies a claim for preferential tariff treatment, it shall notify the importer in writing along with the reasons for such determination.

(3) If the importing Party establishes non-compliance of the goods with the rules of origin, duties shall be levied in accordance with the law of the importing Party.

28. Temporary Suspension of Preferential Treatment.- (1) If, following a verification procedure, the importing Party establishes that the importer, exporter, producer, approved exporter, or status holder, has persistently or deliberately misrepresented the origin status of the goods, the importing and exporting Party shall consult with a view to take appropriate measures. If these measures are insufficient to prevent a reoccurrence of the misrepresentation, the importing Party may temporarily suspend preferential tariff treatment for that exporter, producer, approved exporter, or status holder.

(2) Based on consultations referred to in sub-rule (1) and in any case no longer than 2 months from the date of initiating consultations, a decision whether or not to suspend tariff preference may be taken by the importing Party. The importing Party shall notify the decision, including its reasoning, to the exporting Party, within 30 days after informing the importer accordingly.

(3) If verification procedures have shown that two or more exporters, producers, approved exporters, or status holders, of one Party have persistently or deliberately misrepresented the origin status of goods in a Proof of Origin for the same good at the six digit HS classification level declared to the customs administration of the importing Party and this same good of these exporters, producers, approved exporters, or status holders, accounts for more than half of the preferential imports of the same good in value terms from the exporting party over a period of 1 year prior to the first verification request, the importing Party may submit the matter to the Technical Committee on Rules of Origin and to the Joint Commission with a view to temporarily suspend preferential treatment for all imports of that good from the exporting Party.

(4) The Technical Committee on Rules of Origin shall discuss the matter and shall make a recommendation to the Joint Commission within 6 months from the date of submission on whether or not the importing Party may suspend the granting of preferential tariff treatment for this good as a temporary measure. The importing Party may only suspend preferential treatment if the recommendation of the Technical Committee on Rules of Origin is agreed by the Joint Commission.

(5) The temporary suspension shall apply only for a period no longer than 6 months or any other period that the Parties agree. Where the condition that gave rise to initial temporary suspension persists at the expiry of the 6-month period, the Party concerned may decide to renew the temporary suspension. Any such renewal shall be subject to periodic consultations within the Technical Committee on Rules of Origin.

(6) Following a temporary suspension at exporter level referred to in sub-rule (1) or a Joint Commission decision for temporary suspension as referred to in sub-rule (4) and pursuant to the conclusion of consultations between the Parties concerned, and the Parties, where applicable, agree that the exporter, or producer or approved exporter or status holder(s) has adopted appropriate remedial measures, the importing Party shall agree to:

(a) restore preferential benefit to the good with retrospective effect; or

(b) restore preferential benefit to the good with prospective effect, subject to implementation of any mutually agreed measures by one or both Parties.

29. Penalties.- (1) Each Party shall adopt or maintain measures that provide for the imposition of civil, administrative, and, where appropriate, criminal sanctions for violations of its customs laws and regulations, including those governing rules of origin, and the entitlement to preferential tariff treatment under this Agreement.

(2) Any importer, exporter, producer, approved exporter, or status holder, who incorrectly represents any material information relevant to the determination of origin of a good may be liable to be penalised under a Party’s law.

30. Goods in Transport or Storage.-
In accordance with rule 25, the customs
administration of the importing Party shall grant preferential tariff treatment for an originating good of the exporting Party which, on the date of entry into force of this Agreement:

(a) is in the process of being transported from the exporting Party to the importing Party; or

(b) has not been released from customs control, including an originating good stored in a bonded warehouse regulated by the customs administration of the importing Party.

31. Minor Discrepancies or Errors.- A Party shall not reject a Proof of Origin due to minor errors or discrepancies, such as slight discrepancies between documents, minor omissions of information, spelling, typing or formatting errors, or protrusions from the designated field, provided these minor discrepancies or errors do not create doubt as to the originating status of the good.

32. Confidentiality.- (1) The information obtained by the competent authority or customs administration of the importing Party can be utilised for arriving at a decision regarding the determination of origin in respect of a good and can be used in the legal proceedings concerning issues covered by these rules and in accordance with each Party’s respective law.

(2) Each Party shall protect the information from any unauthorised disclosure in accordance with their respective law.

33. Technical Committee on Rules of Origin.-

(1) The Parties hereby establish a
Technical Committee on Rules of Origin composed of government representatives of each Party responsible for rules of origin matters to consider any matters arising under these rules and its Annexures.

(2) The Technical Committee on Rules of Origin shall consult either in-person or virtually, upon the request of either Party, to ensure that these rules and its Annexures is administered effectively, uniformly and consistently with the spirit and objectives of this Agreement and shall cooperate in the administration of these rules and its Annexures and mutually resolve any issues that may arise.

(3) The Technical Committee on Rules of Origin shall consult to discuss possible amendments or modifications to these rules and its Annexures that may be necessary to reflect changes to the Harmonized System and taking into account developments in technology, production processes or other related matters.

34. Exchange of Electronic Data on Origin.- (1) The Parties shall establish an electronic system to exchange information on Certificates of Origin on entry into force of this Agreement.

(2) The Parties shall, within 12 months from entry into force of this Agreement, establish an electronic system to exchange information on other forms of Proof of Origin. The introduction of other forms of Proof of Origin, such as Origin Declaration, shall be subject to the establishment of an electronic system to exchange information to establish the authenticity of those self-declarations.

Annexure-A
[See clause (b) of rule 3]

(Product Specific Rules of Origin)

Section A
Headnotes to the Annexure

1. For the purposes of this Annexure:

(a) “section” means a section of the Harmonized System; and

(b) “chapter” means the first two digits of the tariff classification number under the Harmonized System;

(c) “heading” means the first four digits of the tariff classification number under the Harmonized System; and

(d) “sub-heading” means the first six digits of the tariff classification number under the Harmonized System.

2. The product specific rule, or set of product specific rules, that applies to a particular sub-heading is set out immediately adjacent to the sub-heading, heading or chapter, as applicable.

3. A requirement of a change in tariff classification applies only to non-originating materials.

4. If a chapter, heading or sub-heading is excluded as part of a change in tariff classification rule, it means that non-originating materials of that chapter, heading or subheading may not be used to meet the change in tariff classification rule. All materials that are excluded must be originating goods.

5. Where a heading or sub-heading is subject to alternative product specific rules, the requirements of this Annexure will be considered to be satisfied if a good satisfies one of the alternative rules.

6. If a good is subject to a product specific rule that includes multiple requirements, the requirements of this Annexure will be considered to be satisfied for that good only if the good satisfies all applicable requirements.

7. For the purposes of Section B of this Annexure:

(a) “WO” means that good must be wholly obtained in the territory of one or both of the Parties within the meaning of rule 4;

(b) “CC” means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the two-digit level;

(c) “CTH” means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the four-digit level;

(d) “CTSH” means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the six-digit level;

(e) “QVC (X)” means the good must satisfy the qualifying value content requirement set out in this Annexure, calculated in accordance with rule 6. The percentages of QVC specified in this Annexure are based on the Build-Down formula. Where the Build-Up formula is used, the required percentage of QVC is 10 percentage points lower than the percentage specified in this Annexure, except that, for goods under HS Chapter 71, the QVC percentage specified in this Annexure applies regardless of whether the Build-Down or Build-Up formula is used;

(f) “melt and pour” in one or both of the Parties means that the product must have been melted and poured in one or both of the Parties wherein the raw material is first produced in an iron or steel-making furnace in a liquid state, and then poured into its first solid shape; and

(g) a Product Specific Rule for this tariff classification shall be negotiated and agreed by the Technical Subcommittee on Rules of Origin, and adopted into this Annexure in accordance with the procedures established under this Agreement, wherein preferential tariff treatment for goods originating in New Zealand is provided under this Agreement. In the interim, a rule of wholly obtained shall apply for these tariff classifications. Section B
Product Specific Rules
HS Code 2022 Product Description PSR
Chapter 1 Animals; live WO
Chapter 2 Meat and edible meat offal WO
Ex Chapter 3 Fish and crustaceans, molluscs and other aquatic invertebrates
WO
030691 Crustaceans, whether in shell or not, live,

fresh, chilled, frozen, dried, salted or in
brine; smoked crustaceans, whether in
shell or not, whether or not cooked before
or during the smoking process;

crustaceans, in shell, cooked by steaming
or by boiling in water, whether or not
chilled, frozen, dried, salted or in brine :

Other: Rock lobster and other sea
crawfish (Palinurus spp., Panulirus spp.,

Jasus spp.)

QVC 35%
030692 Crustaceans, whether in shell or not, live,

fresh, chilled, frozen, dried, salted or in
QVC 35%

HS Code 2022 Product Description PSR
brine; smoked crustaceans, whether in
shell or not, whether or not cooked before
or during the smoking process;

crustaceans, in shell, cooked by steaming
or by boiling in water, whether or not
chilled, frozen, dried, salted or in brine:

Other: Lobsters (Homarus spp.)

030693 Crustaceans, whether in shell or not, live,

fresh, chilled, frozen, dried, salted or in
brine; smoked crustaceans, whether in
shell or not, whether or not cooked before
or during the smoking process;

crustaceans, in shell, cooked by steaming
or by boiling in water, whether or not
chilled, frozen, dried, salted or in brine:

Other: Crabs
QVC 35%
030694 Crustaceans, whether in shell or not, live,

fresh, chilled, frozen, dried, salted or in
brine; smoked crustaceans, whether in
shell or not, whether or not cooked before
or during the smoking process;

crustaceans, in shell, cooked by steaming
or by boiling in water, whether or not
chilled, frozen, dried, salted or in brine:

Other: Norway lobsters (Nephrops
norvegicus)

QVC 35%
030695 Crustaceans, whether in shell or not, live,

fresh, chilled, frozen, dried, salted or in
brine; smoked crustaceans, whether in
shell or not, whether or not cooked before
or during the smoking process;

crustaceans, in shell, cooked by steaming
or by boiling in water, whether or not
chilled, frozen, dried, salted or in brine:

Other: Shrimps and prawns
QVC 35%
030699 Crustaceans, whether in shell or not, live,

fresh, chilled, frozen, dried, salted or in
brine; smoked crustaceans, whether in
shell or not, whether or not cooked before
or during the smoking process;

crustaceans, in shell, cooked by steaming
or by boiling in water, whether or not
chilled, frozen, dried, salted or in brine:

Other: Other
QVC 35%
030819 Aquatic invertebrates other than
crustaceans and molluscs, live, fresh,

QVC 35%

HS Code 2022 Product Description PSR
chilled, frozen, dried, salted or in brine;

smoked aquatic invertebrates other than
crustaceans and molluscs, whether or not
cooked before or during the smoking
process.: Sea cucumbers (Stichopus
japonicus, Holothuroidea): Other
030829 Aquatic invertebrates other than
crustaceans and molluscs, live, fresh,

chilled, frozen, dried, salted or in brine;

smoked aquatic invertebrates other than
crustaceans and molluscs, whether or not
cooked before or during the smoking
process. Sea urchins (Strongylocentrotus
spp., Paracentrotus lividus, Loxechinus
albus, Echinus esculentus) : Other
QVC 35%
030890 Aquatic invertebrates other than
crustaceans and molluscs, live, fresh,

chilled, frozen, dried, salted or in brine;

smoked aquatic invertebrates other than
crustaceans and molluscs, whether or not
cooked before or during the smoking
process.: Other
QVC 35%
030990 Flours, meals and pellets of fish,

crustaceans, molluscs and other aquatic
invertebrates, fit for human consumption.:

Other
CTH
Ex Chapter 4 Dairy produce; birds' eggs; natural honey; edible products of animal origin, not
elsewhere specified or included
Referred to
headnote 7(g)

040900 Natural Honey WO
Chapter 5 Products of animal origin, not elsewhere specified or included
WO
Chapter 6 Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental
foliage.

WO
Ex Chapter 7 Edible vegetables and certain roots and tubers
WO
071090 Vegetables (uncooked or cooked by
steaming or boiling in water), frozen.:

Mixtures of vegetables
CTH
Chapter 8 Edible fruit and nuts; peel of citrus fruit or melons.

WO
Ex Chapter 9 Coffee, tea, mate and spices WO
090620 Cinnamon and cinnamon-tree flowers:

Crushed or ground

CTSH

HS Code 2022 Product Description PSR
091091 Ginger, saffron, turmeric (curcuma),

thyme, bay leaves, curry and other spices.

Other spices: Mixtures referred to in Note
1(b) to HS Chapter 9
WO; or
QVC 40%
091099 Ginger, saffron, turmeric (curcuma),

thyme, bay leaves, curry and other spices.

Other spices: Other
WO; or
QVC 40%
Chapter 10 Cereals WO
Chapter 11 Products of the milling industry; malt,

starches, inulin, wheat gluten
WO
Chapter 12 Oil seeds and oleaginous fruits;

miscellaneous grains, seeds and fruit,

industrial or medicinal plants; straw and
fodder
WO
Chapter 13 Lac; gums, resins and other vegetable saps and extracts
WO
Chapter 14 Vegetable plaiting materials; vegetable products not elsewhere specified or
included
WO
Chapter 15 Animal, vegetable or microbial fats and oils and their cleavage products; prepared
edible fats; animal or vegetable waxes

CTSH + QVC 45%

Ex Chapter 16 Preparations of meat, of fish, of crustaceans, molluscs or other aquatic
invertebrates, or of insects
CC, provided that
value of nonoriginating
materials of
chapter 2 does not
exceed 15% of the
value of the
product
1604 Prepared or preserved fish; caviar and
caviar substitutes prepared from fish eggs.

CC
1605 Crustaceans, molluscs and other aquatic
invertebrates, prepared or preserved.

CC
Ex Chapter 17 Sugars and sugar confectionery CC 1701 Cane or beet sugar and chemically pure
sucrose, in solid form
CC Except chapter
170490 Sugar confectionery (including white
chocolate), not containing cocoa: Other
CC or QVC 40%
Chapter 18 Cocoa and cocoa preparations
1801 Cocoa beans; whole or broken, raw or
roasted
WO
1802 Cocoa; shells, husks, skins and other
cocoa waste
WO
1803 Cocoa; paste; whether or not defatted CTH + QVC 40%

HS Code 2022 Product Description PSR
1804 Cocoa; butter, fat and oil CTH + QVC 40% 1805 Cocoa; powder, not containing added
sugar or other sweetening matter

CTH + QVC 40%

Ex 1806 Chocolate and other food preparations containing cocoa
CTH, except
heading 1805; or

CTH + QVC 40%

180610 Cocoa powder, containing added sugar or other sweetening matter.

CTH, except
heading 1805
Chapter 19 Preparations of cereals, flour, starch or milk; pastrycooks' products
CC
Chapter 20 Preparations of vegetables, fruit, nuts or other parts of plants
CC, provided that
value of nonoriginating
materials of
chapter 7 and 8
does not exceed
10% of the value
of the product
Ex Chapter 21 Miscellaneous edible preparations CC 2102 Yeasts (active or inactive); other singlecell micro-organisms, dead (but not
including vaccines of heading no. 3002);

prepared baking powders

CTH + QVC 40%

2104 Soups and broths and preparations
therefor; homogenised composite food
preparations

CTH + QVC 40%

2105 Ice cream and other edible ice; whether or not containing cocoa
CC, except
chapters 4 and 17
2106 Food preparations not elsewhere specified or included
CC, except chapter
Ex Chapter 22 Beverages, spirits and vinegar
2201 Waters, including natural or artificial
mineral waters and aerated waters, not
containing added sugar or other
sweetening matter nor flavoured; ice and
snow
WO
2202 Waters, including mineral and aerated
waters, containing added sugar or
sweetening matter, flavoured; other nonalcoholic beverages, not including fruit,

nut or vegetable juices of heading no.

2009
WO
2203 Beer made from malt CTH, except
headings 1107 and
1901
HS Code 2022 Product Description PSR
2204 Wine of fresh grapes, including fortified wines; grape must other than that of
heading no. 2009
CC, provided that
value of nonoriginating
materials of
headings 0806 and
2009 does not
exceed 10% of the
value of the
product
2205 Vermouth and other wine of fresh grapes,

flavoured with plants or aromatic
substances
CC, except from
headings 0806 and
2009
2206 Other fermented beverages (for example,

cider, perry, mead sake); mixtures of
fermented beverages and mixtures of
fermented beverages and non-alcoholic
beverages, not elsewhere specified or
included
CC, except from
heading 0409
2207 Undenatured ethyl alcohol of an alcoholic strength by volume of 80% vol. Or higher;

ethyl alcohol and other spirits, denatured,

of any strength
CC
Ex 2208 Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80% vol
spirit, liqueurs and other spiritnous
beverages
CTH and nonoriginating alcohol
content does not
exceed 15% of the
volume of the total
alcoholic strength
of the good
220820 Spirits obtained by distilling grape wine or grape marc
CC, except from
headings 0806 and
2009
220830 Whiskies CTH, provided that
the non-originating
material of heading
2208 used does not
exceed 15% of the
alcoholic strength
of the good.

2209 Vinegar and substitutes for vinegar
obtained from acetic acid

CTH + QVC 40%

Ex Chapter 23 Residues and waste from the food industries; prepared animal fodder
CTH, provided
non-originating
material does not
exceed 20% of the
value.

HS Code 2022 Product Description PSR
230910 Preparations of a kind used in animal
feeding: Dog or cat food, put up for retail
sale

CTH + QVC 40%

230990 Preparations of a kind used in animal
feeding: Other
CTH
Ex Chapter 24 Tobacco and manufactured tobacco substitutes; products, whether or not
containing nicotine, intended for
inhalation without combustion; other
nicotine containing products intended for
the intake of nicotine into the human body
CC
2401 Unmanufactured tobacco; tobacco refuse WO 240411 Products containing tobacco, reconstituted tobacco, nicotine, or tobacco or nicotine
substitutes, intended for inhalation
without combustion; other nicotine
containing products intended for the
intake of nicotine into the human body:

Products intended for inhalation without
combustion: Containing tobacco or
reconstituted tobacco

CTSH + QVC 45%

Chapter 25 Salt; sulphur; earths, stone; plastering materials, lime and cement

CTSH + QVC 45%

Chapter 26 Ores, slag and ash CTSH + QVC 45%
Ex Chapter 27 Mineral fuels, mineral oils and products of their distillation; bituminous substances;

mineral waxes

CTSH + QVC 45%

270119 Coal; briquettes, ovoids and similar solid fuels manufactured from coal.: Other coal
CTH
2709 Petroleum oils and oils obtained from
bituminous minerals; crude
WO
2710 Petroleum oils and oils from bituminous
minerals, not crude; preparations n.e.c,

containing by weight 70% or more of
petroleum oils or oils from bituminous
minerals; these being the basic
constituents of the preparations; waste oils
CTH
2712 Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax,

ozokerite, lignite wax, peat wax, other
mineral waxes, similar products obtained
by synthesis, other processes; coloured or
not
CTH
2715 Bituminous mixtures based on natural
asphalt; on natural bitumen, on petroleum
CTH
HS Code 2022 Product Description PSR
bitumen, on mineral tar or on mineral tar
pitch (e.g. bituminous mastics, cut-backs)

Chapter 28 Inorganic chemicals; organic and
inorganic compounds of precious metals;

of rare earth metals, of radio-active
elements and of isotopes

CTSH + QVC 45%

Ex Chapter 29 Organic chemicals CTSH + QVC 45% 291819 Carboxylic acids with additional oxygen function and their anhydrides, halides,

peroxides and peroxyacids; their
halogenated, sulphonated, nitrated or
nitrosated derivatives.: Other
CTSH; or
QVC 40%
293361 Heterocyclic compounds with nitrogen
hetero-atom(s) only.: Compounds
containing an unfused triazine ring
(whether or not hydrogenated) in the
structure: Melamine

CTSH

Ex Chapter 30 Pharmaceutical products CTSH + QVC 45% 3002 Human blood; animal blood prepared for
therapeutic, prophylactic or diagnostic
uses; antisera, other blood fractions and
immunological products, whether or not
modified or obtained by means of
biotechnological processes; vaccines,

toxins, cultures of micro-organisms
(excluding yeasts) and similar products;

cell cultures, whether or not modified
CTSH; or
QVC 40%
3006 Pharmaceutical goods specified in Note 4 to HS Chapter 30
CTSH; or
QVC 40%
Chapter 31 Fertilizers CTSH + QVC 45%
Ex Chapter 32 Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other
colouring matter; paints, varnishes; putty,

other mastics; inks

CTSH + QVC 45%

3203 Colouring matter of vegetable or animal
origin (including dyeing extracts but
excluding animal black), whether or not
chemically defined; preparations as
specified in Note 3 to HS Chapter 32
based on colouring matter of vegetable or
animal origin
CTSH; or
QVC 45%
3208 Paints and varnishes (including enamels
and lacquers) based on synthetic polymers
or chemically modified natural polymers,

dispersed or dissolved in a non-aqueous
CC
HS Code 2022 Product Description PSR
medium; solutions as defined in Note 4 to
HS Chapter 32.

3209 Paints and varnishes (including enamels
and lacquers) based on synthetic or
chemically modified natural polymers,

dispersed or dissolved in an aqueous
medium
CC
3210 Paints and varnishes (including enamels,

lacquers and distempers), excluding those
of heading no. 3209, prepared water
pigments of a kind used for finishing
leather
CC
3214 Glaziers' putty, grafting putty, resin
cements, caulking compounds and other
mastics; painters' fillings; non-refractory
surfacing preparations for facades, indoor
walls, floors, ceilings or the like
CC
3215 Printing ink, writing or drawing ink and other inks, whether or not concentrated or
solid.

CC
Ex Chapter 33 Essential oils and resinoids; perfumery, cosmetic or toilet preparations

CTSH + QVC 45%

330210 Mixtures of odoriferous substances and mixtures (including alcoholic solutions)

with a basis of one or more of these
substances, of a kind used as raw
materials in industry; other preparations
based on odoriferous substances, of a kind
used for the manufacture of beverages: Of
a kind used in the food or drink industries
CC; or
QVC 45%
330290 Mixtures of odoriferous substances and mixtures (including alcoholic solutions)

with a basis of one or more of these
substances, of a kind used as raw
materials in industry; other preparations
based on odoriferous substances, of a kind
used for the manufacture of beverages.:

Other
CC
Chapter 34 Soap, organic surface-active agents;

washing, lubricating, polishing or
scouring preparations; artificial or
prepared waxes, candles and similar
articles, modelling pastes, dental waxes
and dental preparations with a basis of
plaster

CTSH + QVC 45%

Ex Chapter 35 Albuminoidal substances; modified CTSH + QVC 45%

HS Code 2022 Product Description PSR
starches; glues; enzymes
350110 Casein, caseinates and other casein
derivatives; casein glues.: Casein
CC, except chapter
350190 Casein, caseinates and other casein
derivatives; casein glues.: Other
CTH
350220 Albumins (including concentrates of two or more whey proteins, containing by
weight more than 80% whey proteins,

calculated on the dry matter), albuminates
and other albumin derivatives: Milk
albumin, including concentrates of two or
more whey proteins
CTH
350290 Albumins (including concentrates of two or more whey proteins, containing by
weight more than 80 % whey proteins,

calculated on the dry matter), albuminates
and other albumin derivatives.: Other
CTH
3504 Peptones and their derivatives; other
protein substances and their derivatives
n.e.c. or included; hide powder, whether
or not chromed
CC
Chapter 36 Explosives; pyrotechnic products;

matches; pyrophoric alloys; certain
combustible preparations

CTSH + QVC 45%

Ex Chapter 37 Photographic or cinematographic goods CTSH + QVC 45% 370710 Chemical preparations for photographic uses (other than varnishes, glues,

adhesives and similar preparations);

unmixed products for photographic uses,

put up in measured portions or put up for
retail sale in a form ready for use:

sensitizing emulsions
CTH
Ex Chapter 38 Miscellaneous chemical products CTSH + QVC 45% 3816 Refractory cements, mortars, concretes
and similar compositions, including
dolomite ramming mix, other than
products of heading 3801
CC
Ex Chapter 39 Plastics and articles thereof CTH 3915 Waste, parings and scrap, of plastics WO 3916 Monofilament of which any crosssectional dimension exceeds 1mm, rods,

sticks and profile shapes, whether or not
surface-worked but not otherwise worked,

of plastics

CTSH

3917 Tubes, pipes and hoses and fittings thereof CTSH HS Code 2022 Product Description PSR
(for example, joints, elbows, flanges), of
plastics
3918 Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of
tiles; wall or ceiling coverings of plastics,

as defined in Note 9 to this Chapter.

CTSH

3919 Self-adhesive plates, sheets, film, foil,

tape, strip and other flat shapes, of
plastics, whether or not in rolls.

CTSH

3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced,

laminated, supported or similarly
combined with other materials.

CTSH

3921 Other plates, sheets, film, foil and strip, of plastics.

CTSH

3922 Baths, shower-baths, sinks, wash-basins,

bidets, lavatory pans, seats and covers,

flushing cisterns and similar sanitary
ware, of plastics.

CTSH

3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and
other closures, of plastics.

CTSH

3924 Tableware, kitchenware, other household
articles and hygienic or toilet articles, of
plastics.

CTSH

3925 Builders' ware of plastics, not elsewhere specified or included.

CTSH

3926 Other articles of plastics and articles of other materials of headings 39.01 to
39.14.

CTSH

Ex Chapter 40 Rubber and articles thereof CTH Ex 4001 Natural rubber, balata, gutta-percha,

guayule, chicle and similar gums; in
primary forms or in plates, sheets or strip
WO
400130 Balata, gutta-percha, guayule, chicle and similar natural gums

CTSH + QVC 45%

4004 Waste, parings and scrap of rubber (other than hard rubber) and powders and
granules obtained therefrom

CTSH + QVC 45%

400931 Tubes, pipes and hoses, of vulcanised
rubber other than hard rubber, with or
without their fittings (for example, joints,

elbows, flanges): Reinforced or otherwise
combined only with textile materials:

Without fittings

CTSH + QVC 45%

HS Code 2022 Product Description PSR
401490 Hygienic or pharmaceutical articles
(including teats), of vulcanised rubber
other than hard rubber, with or without
fittings of hard rubber.: Other
CTSH; or
QVC 40%
4015 Articles of apparel and clothing
accessories (including gloves, mittens and
mitts), for all purposes, of vulcanised
rubber other than hard rubber

CTSH + QVC 45%

Ex Chapter 41 Raw hides and skins (other than furskins) and leather

CTSH + QVC 45%

410441 Tanned or crust hides and skins of bovine (including buffalo) or equine animals,

without hair on, whether or not split, but
not further prepared.: In the dry state
(crust): Full grains, unsplit; grain splits

CTSH

410449 Tanned or crust hides and skins of bovine (including buffalo) or equine animals,

without hair on, whether or not split, but
not further prepared.: In the dry state
(crust): Other

CTSH

4107 Leather further prepared after tanning or crusting, including parchment-dressed
leather, of bovine (including buffalo) or
equine animals, without hair on, whether
or not split, other than leather of heading
4114
CTH
4112 Leather further prepared after tanning or crusting, including parchment dressed
leather, of sheep or lamb, without wool
on, whether or not split, other than leather
of heading 4114
CTH
411310 Leather further prepared after tanning or crusting, including parchment-dressed
leather, of other animals, without wool or
hair on, whether or not split, other than
leather of heading 4114: Of goats or kids
CTH
4114 Chamois (including combination chamois)

leather; patent leather and patent
laminated leather; metallised leather
CTH
Chapter 42 Articles of leather; saddlery and harness;

travel goods, handbags and similar
containers; articles of animal gut (other
than silk-worm gut)

CC
Ex Chapter 43 Furskins and artificial fur; manufactures thereof
CTH
HS Code 2022 Product Description PSR
4301 Raw furskins (including heads, tails,

paws, other pieces or cuttings, suitable for
furriers' use), excluding raw hides and
skins of heading no. 4101, 4102 or 4103

CTSH + QVC 45%

Ex Chapter 44 Wood and articles of wood; wood charcoal
CTH
4401 Fuel wood, in logs, billets, twigs, faggots or similar forms; wood in chip or
particles; sawdust and wood waste and
scrap, whether or not agglomerated in
logs, briquettes, pellets or similar forms

CTSH + QVC 45%

4402 Wood charcoal (including shell or nut
charcoal), whether or not agglomerated

CTSH + QVC 45%

Ex 4403 Wood in the rough, whether or not
stripped of bark or sapwood, or roughly
squared

CTSH + QVC 45%

440321 Other, coniferous: Of pine (Pinus spp.), of which the smallest cross-sectional
dimension is 15 cm or more
CTH; or
QVC 40%
440322 Other, coniferous: Of pine (Pinus spp.),

other
CTH; or
QVC 40%
4404 Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn
lengthwise; wooden sticks, roughly
trimmed but not turned, bent or otherwise
worked, suitable for the manufacture of
walking-sticks, umbrellas, tool handles or
the like; chipwood and the like.

CTSH + QVC 45%

4405 Wood wool; wood flour CTSH + QVC 45%
4406 Railway or tramway sleepers (cross-ties)

of wood

CTSH + QVC 45%

4407 Wood sawn or chipped lengthwise, sliced
or peeled, whether or not planed, sanded
or finger-jointed, of a thickness exceeding
6mm

CTSH + QVC 45%

440921 Wood (including strips and friezes for parquet flooring, not assembled)

continuously shaped (tongued, grooved,

rebated, chamfered, V-jointed, beaded,

moulded, rounded or the like) along any
of its edges, ends or faces, whether or not
planed, sanded or end-jointed.: Nonconiferous: Of bamboo

CTSH + QVC 45%

4413 Densified wood, in blocks, plates, strips or profile shapes

CTSH + QVC 45%

HS Code 2022 Product Description PSR
4416 Casks, barrels, vats, tubs and other
coopers' products and parts thereof, of
wood, including staves

CTSH + QVC 45%

Chapter 45 Cork and articles of cork CTH
Ex Chapter 46 Manufactures of straw, esparto or other plaiting materials; basketware and
wickerwork

CTSH + QVC 45%

460290 Basketwork, wickerwork and other
articles, made directly to shape from
plaiting materials or made up from goods
of heading 46.01; articles of loofah.:

Other
CTH
Chapter 47 Pulp of wood or other fibrous cellulosic material; recovered (waste and scrap)

paper or paperboard

CTSH + QVC 45%

Chapter 48 Paper and paperboard; articles of paper pulp, of paper or paperboard

CTSH + QVC 45%

Chapter 49 Printed books, newspapers, pictures and other products of the printing industry;

manuscripts, typescripts and plans

CTSH + QVC 45%

Ex Chapter 50 Silk CTH + QVC 40%
5001 Silk-worm cocoons suitable for reeling WO 5002 Raw silk (not thrown) WO
5003 Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted
stock)

WO
Ex Chapter 51 Wool, fine or coarse animal hair;

horsehair yarn and woven fabric

CTH + QVC 40%

510111 Wool, not carded or combed.: Greasy,

including fleece-washed wool: Shorn
wool
CC; or
QVC 40%
510121 Wool, not carded or combed. Degreased,

not carbonised: Shorn wool
CC
Ex Chapter 52 Cotton CTH + QVC 40%
5201 Cotton; not carded or combed WO
5202 Cotton waste (including yarn waste and
garnetted stock)

WO
5203 Cotton, carded or combed WO
Chapter 53 Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn

CTH + QVC 40%

Chapter 54 Man-made filaments; strip and the like of man-made textile materials

CTH + QVC 40%

Chapter 55 Man-made staple fibres CTH + QVC 40% Chapter 56 Wadding, felt and nonwovens, special yarns; twine, cordage, ropes and cables

CTH + QVC 40%

HS Code 2022 Product Description PSR
and articles thereof
Chapter 57 Carpets and other textile floor coverings CTH + QVC 40% Chapter 58 Special woven fabrics, tufted textile fabrics, lace, tapestries, trimmings,

embroidery

CTH + QVC 40%

Chapter 59 Impregnated, coated, covered or
laminated; textile articles of a kind
suitable for industrial use

CTH + QVC 40%

Chapter 60 Knitted or crocheted fabrics CTH + QVC 40% Chapter 61 Articles of apparel and clothing
accessories; knitted or crocheted

CTH + QVC 40%

Chapter 62 Articles of apparel and clothing
accessories; not knitted or crocheted

CTH + QVC 40%

Chapter 63 Other made up textile articles; sets; worn clothing and worn textile articles; rags

CTH + QVC 40%

Ex Chapter 64 Footwear; gaiters and the like; parts of such articles
CTH
6406 Parts of footwear (including uppers
whether or not attached to soles other than
outer soles); removable in-soles, heel
cushions and similar articles; gaiters,

leggings and similar articles, and parts
thereof.

CC
Ex Chapter 65 Headgear and parts thereof CTSH + QVC 45% 6506 Other headgear, whether or not lined or
trimmed
CC
Chapter 66 Umbrellas, sun umbrellas, walking-sticks,

seat sticks, whips, riding crops; and parts
thereof

CTSH + QVC 45%

Ex Chapter 67 Prepared feathers and down, prepared;

and articles made of feather or of down;

artificial flowers; articles of human hair
CC
6702 Artificial flowers, foliage and fruit,

artificial, and parts thereof; articles made
of artificial flowers, foliage or fruit

CTSH + QVC 45%

6703 Human hair, dressed, thinned, bleached or otherwise worked; wool or other animal
hair or other textile materials, prepared for use in making wigs or the like

CTSH + QVC 45%

Ex Chapter 68 Articles of stone, plaster, cement,

asbestos, mica or similar materials
CC
6803 Worked slate and articles of slate or of agglomerated slate

CTSH + QVC 45%

6807 Articles of asphalt or of similar material (for example, petroleum bitumen or coal

CTSH + QVC 45%

HS Code 2022 Product Description PSR
tar pitch)

6812 Fabricated asbestos fibres; mixtures with a basis of asbestos or with a basis of
asbestos and magnesium carbonate;

articles of such mixtures or of asbestos
(for example, thread, woven fabric,

clothing, headgear, footwear, gaskets),

whether or not reinforced, other than
goods of heading 6811 or 6813

CTSH + QVC 45%

6813 Friction material and articles thereof (for example, sheets, rolls, strips, segments,

discs, washers, pads), not mounted, for
brakes, for clutches or the like, with a
basis of asbestos, of other mineral
substances or of cellulose, whether or not
combined with textile or other materials

CTSH + QVC 45%

6815 Articles of stone or of other mineral
substances (including carbon fibres,

articles of carbon fibres and articles of
peat), not elsewhere specified or included

CTSH + QVC 45%

Chapter 69 Ceramic products CC
Ex Chapter 70 Glass and glassware CTSH + QVC 45% 7007 Safety glass, consisting of toughened
(tempered) or laminated glass
CTH
7008 Multiple-walled insulating units of glass CTH 7009 Glass mirrors; whether or not framed,

including rear-view mirrors
CTH
7010 Carboys, bottles, flasks, jars, pots, phials,

ampoules, containers of glass of a kind
used for the conveyance or packing of
goods; preserving jars of glass; stoppers,

lids and other closures of glass
CTH
7016 Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or moulded
glass, whether or not wired, of a kind used
for building or construction purposes;

glass cubes and other glass smallwares,

whether or not on a backing, for mosaics
or similar decorative purposes; leaded
lights and the like; multicellular or foam
glass in blocks, panels, plates, shells or
similar forms.

CTH
701890 Glass beads, imitation pearls, imitation precious or semi-precious stones and
similar glass smallwares, and articles
CTH
HS Code 2022 Product Description PSR
thereof other than imitation jewellery;

glass eyes other than prosthetic articles;

statuettes and other ornaments of lampworked glass, other than imitation
jewellery; glass microspheres not
exceeding 1 mm in diameter.: Other
701971 Glass fibres (including glass wool) and articles thereof (for example, yarn,

rovings, woven fabrics): Chemically
bonded fabrics: Veils (thin sheets)

CTH
7020 Other articles of glass CTH
Chapter 71 Natural or cultured pearls, precious or semi-precious stones, precious metals,

metals clad with precious metal, and
articles thereof; imitation jewellery; coin
710110 Natural pearls unworked WO
710121 Cultured pearls: unworked WO
710122 Cultured pearls: worked CTSH + QVC 6% 710210 Unsorted WO
710221 Industrial: Unworked or simply sawn,

cleaved or bruted
WO
710229 Industrial: Other CTSH + QVC 6%
710231 Non-industrial diamonds: unworked or
simply sawn, cleaved or bruted
WO
710239 Non-industrial diamonds: Other CTSH + QVC 6% 710310 Unworked or simply sawn or roughly
shaped
WO
710391 Otherwise worked: Rubies, sapphires and emeralds

CTSH + QVC 20%

710399 Otherwise worked: Others CTSH + QVC 20% 710410 Piezo-electric quartz Hydrothermal Process
710421 Other, unworked or simply sawn or
roughly shaped: Diamonds
High Pressure
High Temperature
(HPHT) or
Chemical Vapor
Deposition (CVD)

710429 Other, unworked or simply sawn or
roughly shaped: Other
Hydrothermal
Process and Flux
Method
710491 Other: Diamonds CTSH + QVC 6%
710499 Other: Other CTSH + QVC 40%
710510 Of diamonds CTH
710590 Other CTH
710610 Powder Production/

HS Code 2022 Product Description PSR
manufacturing
from unwrought
silver
710691 Other: unwrought Dore- CC;

Others-
Electrolytic/
chemical
separation and
mutual recognition
of good delivery
standards as per
respective country
policy
710692 Other: semi-manufactured Dore- CC;

Others- CTSH
710700 Base metals clad with silver, not further worked than semi-manufactured

CTH+ QVC 40%

710811 Non-monetary: powder Production/
manufacturing
from unwrought
gold
710812 Non-monetary: other unwrought forms Dore CC;

Others-
Electrolytic/
chemical
separation and
mutual recognition
of good delivery
standards as per
respective country
policy
710813 Non-monetary: other semi-manufactured
forms
Dore- CC;

Others- CTSH
710820 Monetary CTSH
710900 Base metals or silver, clad with gold, not further worked than semi-manufactured

CTH + QVC 40%

711011 Platinum: unwrought or in powder form For Powder form: Production/
manufacturing
from unwrought
platinum;

Dore- CC;

711019 Platinum: Other CTSH
711021 Palladium: unwrought or in powder form For Powder form: Production/

HS Code 2022 Product Description PSR
manufacturing
from unwrought
palladium;

Dore- CC;

711029 Palladium: Other CTSH
711031 Rhodium: unwrought or in powder form For Powder form: Production/
manufacturing
from unwrought
Rhodium;

Dore- CC;

711039 Rhodium: Other CTSH
711041 Iridium, osmium and ruthenium:

unwrought or in powder form
For Powder form:

Production/
manufacturing
from unwrought
Iridium, osmium,

ruthenium;

Dore- CC;

711049 Iridium, osmium and ruthenium: Other CTSH 711100 Base metals, silver or gold, clad with platinum, not further worked than semimanufactured

CTH + QVC 40%

711230 Ash containing precious metal or precious metal compounds
CTH
711291 Other: of gold, including metal clad with gold but excluding sweepings containing
other precious metals
CTH
711292 Other: of platinum, including metal clad with platinum but excluding sweepings
containing other precious metals
CTH
711299 Other CTH
711311 Studded with gemstones/ articles of silver CTSH + QVC 6% 711311 Studded with diamonds CTSH + QVC 7%
711319 Plain Jewellery of gold/ platinum /other precious metals/ parts thereof

CTSH + QVC

3.5%
711319 Jewellery of gold studded with gemstones CTSH + QVC 6% 711319 Jewellery of gold studded with diamonds CTSH + QVC 7% 711319 Jewellery of gold set with pearls CTSH + QVC 6% 711319 jewellery of gold set with precious and semi- precious stones other than diamonds

CTSH + QVC 6%

711319 jewellery of platinum unset CTSH + QVC 3.5%
711319 parts of plain gold jewellery CTSH + QVC 3.5%

HS Code 2022 Product Description PSR
711319 articles of other precious metal CTSH + QVC 3.5%
711320 Of base metal clad with precious metal CTH + QVC 40% 711411 Of precious metal whether or not plated or clad with precious metal: of silver,

whether or not plated or clad with other
precious metal
CTH, except
headings 7113,

7115-7118, + QVC
3.5%
711419 Of precious metal whether or not plated or clad with precious metal: of other
precious metal, whether or not plated or
clad with precious metal
CTH, except
headings 7113,

7115-7118, + QVC
3.5%
711420 Of base metal clad with precious metal CTH + QVC 40% 711510 Catalysts in the form of wire cloth or grill,

of platinum
CTH
711590 Other CTH
711610 Of natural or cultured pearls CTH + QVC 40% 711620 Of precious or semi-precious stones
(natural, synthetic or reconstructed)

CTH + QVC 40%

711711 Of base metal, whether or not plated with precious metal: cuff-links and studs

CTH + QVC 40%

711719 Of base metal, whether or not plated with precious metal: other

CTH + QVC 40%

711790 Other CTH + QVC 40%
711810 Coin (other than gold coin), not being legal tender

CTH + QVC 1.5%

711890 Other CTH + QVC 1.5%
Ex Chapter 72 Iron and steel Melt and Pour
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms

CTSH + QVC 45%

7202 Ferro-alloys CTSH + QVC 45%
7203 Ferrous products obtained by direct
reduction of iron ore and other spongy
ferrous products, in lumps, pellets or the
like; iron having a minimum purity of
99.94%, in lumps, pellets or similar forms

CTSH + QVC 45%

Ex 7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel

CTSH + QVC 45%

720421 Waste and scrap of alloy steel: of stainless steel
CTH
720429 Waste and scrap of alloy steel: Other CTH 720430 Waste and scrap of tinned iron or steel CTH 720449 Other waste and scrap: Other CTH
7205 Granules and powders, of pig iron,

spiegeleisen, iron or steel

CTSH + QVC 45%

Ex Chapter 73 Iron or steel articles CC
HS Code 2022 Product Description PSR
7301 sheet piling of iron or steel, whether or not drilled, punched or made from assembled
elements; welded angles, shapes and
sections, of iron or steel
Melt and Pour
7302 Railway or tramway track construction
material of iron or steel, the following:

rails, check-rails and rack rails, switch
blades, crossing frogs, point rods and
other crossing pieces, sleepers (cross-ties),

fish-plates, chairs, chair wedges, sole
plates (base plates), rail clips, bedplates,

ties and other material specialized for
jointing or fixing rails.

Melt and Pour
7303 Tubes, pipes and hollow profiles, of cast iron
Melt and Pour
7304 Tubes, pipes and hollow profiles,

seamless, of iron (other than cast iron) or
steel
Melt and Pour
7305 Other tubes and pipes (for example,

welded, riveted or similarly closed),

having circular cross-sections, the external
diameter of which exceeds 406.4 mm of
iron or steel.

Melt and Pour
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or
similarly closed), of iron or steel.

Melt and Pour
Ex Chapter 74 Copper and articles thereof CTSH + QVC 45% Ex 7407 Copper bars, rods and profiles CC
740710 Of refined copper CTH
Ex 7408 Copper wire CC
740811 Of refined copper: Of which the
maximum cross-sectional dimension
exceeds 6 mm
CTH
740819 Of refined copper: Other CTH
Ex 7411 Copper tubes and pipes CC
741110 Of refined copper CTH
741210 Copper tube or pipe fittings (for example,

couplings, elbows, sleeves): Of refined
copper
CTH
741220 Copper tube or pipe fittings (for example,

couplings, elbows, sleeves): Of copper
alloys
CC
HS Code 2022 Product Description PSR
7413 Stranded wire, cables, plaited bands and the like, of copper, not electrically
insulated.

CTH
7415 Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar
articles, of copper or of iron or steel with
heads of copper; screws, bolts, nuts, screw
hooks, rivets, cotters, cotter-pins, washers
(including spring washers) and similar
articles, of copper.

CTH
7419 Other articles of copper CTH
Chapter 75 Nickel and articles thereof CTSH + QVC 45% Ex Chapter 76 Aluminium and articles thereof CTH 7601 Aluminium; unwrought CTSH + QVC 45%
7602 Aluminium; waste and scrap CTSH + QVC 45% 7603 Aluminium; powders and flakes CTSH + QVC 45% 7604 Aluminium; bars, rods and profiles CTSH + QVC 45% 760521 Aluminium wire: Of aluminium alloys: Of which the maximum cross-sectional
dimension exceeds 7 mm

CTSH + QVC 45%

760529 Aluminium wire: Of aluminium alloys:

Other

CTSH + QVC 45%

760612 Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm: Rectangular
(including square): Of aluminium alloys

CTSH + QVC 45%

760692 Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm: Other: Of
aluminium alloys

CTSH + QVC 45%

760820 Aluminium; tubes and pipes: Of
aluminium alloys

CTSH + QVC 45%

7609 Aluminium; tube or pipe fittings (for
example, couplings, elbows, sleeves)

CTSH + QVC 45%

7610 Aluminium structures (excluding
prefabricated buildings of heading 94.06)

and parts of structures (for example,

bridges and bridge-sections, towers,

lattice masts, roofs, roofing frameworks,

doors and windows and their frames and
thresholds for doors, balustrades, pillars
and columns); aluminium plates, rods,

profiles, tubes and the like, prepared for
use in structures

CTSH + QVC 45%

7613 Aluminium; containers for compressed or
liquefied gas

CTSH + QVC 45%

HS Code 2022 Product Description PSR
7615 Table, kitchen or other household articles and parts thereof, of aluminium; pot
scourers and scouring or polishing pads,

gloves and the like, of aluminium;

sanitary ware and parts thereof, of
aluminium

CTSH + QVC 45%

761691 Other articles of aluminium.: Other:

Cloth, grill, netting and fencing, of
aluminium wire

CTSH + QVC 45%

Ex Chapter 78 Lead and articles thereof CTSH + QVC 45% 780411 Lead plates, sheets, strip and foil; lead powders and flakes.: Plates, sheets, strip
and foil: Sheets, strip and foil of a
thickness (excluding any backing) not
exceeding 0.2 mm
CTH
7806 Other articles of lead CTH
Ex Chapter 79 Zinc and articles thereof CTSH + QVC 45% 7907 Other articles of zinc CTH
Ex Chapter 80 Tin; articles thereof CTSH + QVC 45% 8007 Other articles of tin CTH
Chapter 81 Other base metals; cermets; articles thereof

CTSH + QVC 45%

Chapter 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof, of base
metal
CC
Chapter 83 Miscellaneous articles of base metal CC Ex 8301 Padlocks and locks (key, combination or electrically operated), of base metal;

clasps and frames with clasps,

incorporating locks, of base metal; keys
for any of the foregoing articles, of base
metal

CTSH + QVC 45%

830160 Parts CTH
Ex Chapter 84 Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

CTSH + QVC 45%

8402 Steam or other vapour generating boilers (other than central heating hot water
boilers capable also of producing low
pressure steam); super-heated water
boilers

CTH + QVC 40%

8403 Central heating boilers other than those of heading 8402

CTH + QVC 40%

8404 Auxiliary plant for use with boilers of
heading 8402 or 8403 (for example,

economisers, super-heaters, soot

CTH + QVC 40%

HS Code 2022 Product Description PSR
removers, gas recoverers); condensers for
steam or other vapour power units
840590 Producer gas or water gas generators, with or without their purifiers; acetylene gas
generators and similar water process gas
generators, with or without their purifiers:

Parts
CTH
840999 Parts suitable for use solely or principally with the engines of heading 8407 or 8408:

Others: Other
CTH
841290 Other engines and motors: Parts CTH + QVC 40% 841391 Pumps for liquids, whether or not fitted with a measuring device; liquid elevators:

Parts: Of pumps
CTH
841392 Pumps for liquids, whether or not fitted with a measuring device; liquid elevators:

Parts: Of liquid elevators
CTH
841490 Air or vacuum pumps, air or other gas
compressors and fans; ventilating or
recycling hoods incorporating a fan,

whether or not fitted with filters; gas-tight biological safety cabinets, whether or not
fitted with filters: Parts
CTH
841590 Air conditioning machines, comprising a motor-driven fan and elements for
changing the temperature and humidity,

including those machines in which the
humidity cannot be separately regulated:

Parts
CTH
841690 Furnace burners for liquid fuel, for
pulverised solid fuel or for gas;

mechanical stokers, including their
mechanical grates, mechanical ash
dischargers and similar appliances: Parts
CTH
Ex 8417 Industrial or laboratory furnaces and ovens, including incinerators, non-electric
QVC 40%
841790 Parts CTH
841891 Refrigerators, freezers and other
refrigerating or freezing equipment,

electric or other; heat pumps other than air
conditioning machines of heading 8415:

Parts: Furniture designed to receive
refrigerating or freezing equipment
CTH
841899 Refrigerators, freezers and other
refrigerating or freezing equipment,

CTH
HS Code 2022 Product Description PSR
electric or other; heat pumps other than air
conditioning machines of heading 8415:

Parts: Other
841940 Machinery, plant or laboratory equipment,

whether or not electrically heated
(excluding furnaces, ovens and other
equipment of heading 8514), for the
treatment of materials by a process
involving a change of temperature such as
heating, cooking, roasting, distilling,

rectifying, sterilising, pasteurising,

steaming, drying, evaporating, vaporising,

condensing or cooling, other than
machinery or plant of a kind used for
domestic purposes; instantaneous or
storage water heaters, non-electric:

Distilling or rectifying plant
QVC 40%
841989 Machinery, plant or laboratory equipment,

whether or not electrically heated
(excluding furnaces, ovens and other
equipment of heading 8514), for the
treatment of materials by a process
involving a change of temperature such as
heating, cooking, roasting, distilling,

rectifying, sterilising, pasteurising,

steaming, drying, evaporating, vaporising,

condensing or cooling, other than
machinery or plant of a kind used for
domestic purposes; instantaneous or
storage water heaters, non-electric: Other
machinery, plant and equipment: Other
QVC 40%
841990 Machinery, plant or laboratory equipment,

whether or not electrically heated
(excluding furnaces, ovens and other
equipment of heading 8514), for the
treatment of materials by a process
involving a change of temperature such as
heating, cooking, roasting, distilling,

rectifying, sterilising, pasteurising,

steaming, drying, evaporating, vaporising,

condensing or cooling, other than
machinery or plant of a kind used for
domestic purposes; instantaneous or
storage water heaters, non-electric: Parts
CTH
Ex 8420 Calendering or other rolling machines,

other than for metals or glass, and
QVC 40%

HS Code 2022 Product Description PSR
cylinders therefor
842099 Parts: Other CTH
842199 Centrifuges, including centrifugal dryers;

filtering or purifying machinery and
apparatus, for liquids or gases: Parts:

Other
CTH
842290 Dish washing machines; machinery for
cleaning or drying bottles or other
containers; machinery for filling, closing,

sealing or labelling bottles, cans, boxes,

bags or other containers; machinery for
capsuling bottles, jars, tubes and similar
containers; other packing or wrapping
machinery (including heat-shrink
wrapping machinery); machinery for
aerating beverages: Parts
CTH
842390 Weighing machinery (excluding balances of a sensitivity of 5 cg or better),

including weight operated counting or
checking machines; weighing machine
weights of all kinds.: Weighing machine
weights of all kinds; parts of weighing
machinery
CTH
842490 Mechanical appliances (whether or not
hand-operated) for projecting, dispersing
or spraying liquids or powders; fire
extinguishers, whether or not charged;

spray guns and similar appliances; steam
or sand blasting machines and similar jet
projecting machines: Parts
CTH
8425 Pulley tackle and hoists other than skip hoists; winches and capstans; jacks
CTH
8426 Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle
carriers and works trucks fitted with a
crane
QVC 40%
8427 Fork-lift trucks; other works trucks fitted with lifting or handling equipment
QVC 40%
Ex 8428 Other lifting, handling, loading or
unloading machinery (for example, lifts,

escalators, conveyors, teleferics)

CTH
842870 Industrial robots CTSH + QVC 45%
842890 Other machinery QVC 40%
8429 Self-propelled bulldozers, angledozers,

graders, levellers, scrapers, mechanical
QVC 40%

HS Code 2022 Product Description PSR
shovels, excavators, shovel loaders,

tamping machines and road rollers
8430 Other moving, grading, levelling,

scraping, excavating, tamping,

compacting, extracting or boring
machinery, for earth, minerals or ores;

pile-drivers and pile-extractors; snowploughs and snow- blowers
QVC 40%
Ex 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to
8430
CTH
843141 Of machinery of heading 84.26, 8429 or 8430: Buckets, shovels, grabs and grips
QVC 40%
843142 Of machinery of heading 8426, 8429 or
8430: Bulldozer or angledozer blades
QVC 40%
843280 Agricultural, horticultural or forestry machinery for soil preparation or
cultivation; lawn or sports-ground rollers:

Other machinery
CTH
843319 Harvesting or threshing machinery,

including straw or fodder balers; grass or
hay mowers; machines for cleaning,

sorting or grading eggs, fruit or other
agricultural produce, other than machinery
of heading 8437: Mowers for lawns, parks
or sports-grounds: Other
CTH
Ex 8437 Machines for cleaning, sorting or grading seed, grain or dried leguminous
vegetables; machinery used in the milling
industry or for the working of cereals or
dried leguminous vegetables, other than
farm-type machinery
QVC 40%
843790 Parts CTH
843880 Machinery, not specified or included
elsewhere in this Chapter, for the
industrial preparation or manufacture of
food or drink, other than machinery for
the extraction or preparation of animal or
fixed vegetable or microbial fats or oils:

Other machinery
QVC 40%
843890 Machinery, not specified or included
elsewhere in this Chapter, for the
industrial preparation or manufacture of
food or drink, other than machinery for
the extraction or preparation of animal or
CTH
HS Code 2022 Product Description PSR
fixed vegetable or microbial fats or oils:

Parts
843910 Machinery for making pulp of fibrous
cellulosic material or for making or
finishing paper or paperboard: Machinery
for making pulp of fibrous cellulosic
material
QVC 40%
843991 Machinery for making pulp of fibrous
cellulosic material or for making or
finishing paper or paperboard: Parts: Of
machinery for making pulp of fibrous
cellulosic material
CTH
844110 Other machinery for making up paper
pulp, paper or paperboard, including
cutting machines of all kinds: Cutting
machines
QVC 40%
844311 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Offset printing machinery, reel-fed
QVC 40%
844312 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Offset printing machinery, sheet-fed,

office type (using sheets with one side not
exceeding 22 cm and the other side not
exceeding 36 cm in the unfolded state)

QVC 40%
844313 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Other offset printing machinery
QVC 40%
844314 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Letterpress printing machinery, reel fed,

excluding flexographic printing
QVC 40%
844315 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Letterpress printing machinery, other than
reel fed, excluding flexographic printing
QVC 40%
844316 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Flexographic printing machinery
QVC 40%

HS Code 2022 Product Description PSR
844317 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Gravure printing machinery
QVC 40%
844319 Printing machinery used for printing by means of plates, cylinders and other
printing components of heading 8442:

Other
QVC 40%
844519 Machines for preparing textile fibres:

Other
QVC 40%
845090 Household or laundry-type washing
machines, including machines which both
wash and dry: Parts
CTH
845110 Dry-cleaning machines QVC 40%
845140 Washing, bleaching or dyeing machines QVC 40% 845150 Machines for reeling, unreeling, folding,

cutting or pinking textile fabrics
QVC 40%
845180 Other machinery QVC 40%
845190 Machinery; parts, of the machinery of
heading no. 8451
CTH
Ex 8454 Converters, ladles, ingot moulds and
casting machines, of a kind used in
metallurgy or in metal foundries
QVC 40%
845490 Parts CTH
8456 Machine-tools for working any material
by removal of material, by laser or other
light or photon beam, ultrasonic, electrodischarge, electro-chemical, electron
beam, ionic-beam or plasma arc
processes; water-jet cutting machines
QVC 40%
8457 Machining centres, unit construction
machines (single station) and multi-station
transfer machines, for working metal
QVC 40%
8458 Lathes (including turning centres) for
removing metal
QVC 40%
8459 Machine-tools (including way-type unit
head machines) for drilling, boring,

milling, threading or tapping by removing
metal, other than lathes (including turning
centres) of heading 8458
QVC 40%
8460 Machine-tools for deburring, sharpening,

grinding, honing, lapping, polishing or
otherwise finishing metal or cermets by
means of grinding stones, abrasives or
polishing products, other than gear
QVC 40%

HS Code 2022 Product Description PSR
cutting, gear grinding or gear finishing
machines of heading 8461
8461 Machine-tools for planing, shaping,

slotting, broaching, gear cutting, gear
grinding or gear finishing, sawing,

cutting-off and other machine-tools
working by removing metal or cermets,

not elsewhere specified or included
QVC 40%
846211 Hot forming machines for forging, die
forging (including presses) and hot
hammers: Closed die forging machines
QVC 40%
846219 Hot forming machines for forging, die
forging (including presses) and hot
hammers: Other
QVC 40%
846229 Bending, folding, straightening or
flattening machines (including press
brakes) for flat products: Other
QVC 40%
846239 Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for
flat products, other than combined
punching and shearing machines: Other
QVC 40%
846242 Punching, notching or nibbling machines (excluding presses) for flat products
including combined punching and
shearing machines: Numerically
controlled
QVC 40%
846249 Punching, notching or nibbling machines (excluding presses) for flat products
including combined punching and
shearing machines: Other
QVC 40%
846251 Machines for working tube, pipe, hollow section and bar (excluding presses):

Numerically controlled
QVC 40%
846259 Machines for working tube, pipe, hollow section and bar (excluding presses): Other
QVC 40%
846261 Cold metal working presses: Hydraulic
presses
QVC 40%
846262 Cold metal working presses: Mechanical presses
QVC 40%
846263 Cold metal working presses: Servopresses
QVC 40%
846269 Cold metal working presses: Other QVC 40% 846290 Machine-tools (including presses) for
working metal by forging, hammering or
die forging (excluding rolling mills);

QVC 40%

HS Code 2022 Product Description PSR
machine-tools (including presses, slitting
lines and cut-to-length lines) for working
metal by bending, folding, straightening,

flattening, shearing, punching, notching or
nibbling (excluding draw-benches);

presses for working metal or metal
carbides, not specified above: Other
8463 Other machine-tools for working metal or cermets, without removing material
QVC 40%
8465 Machine-tools (including machines for
nailing, stapling, glueing or otherwise
assembling) for working wood, cork,

bone, hard rubber, hard plastics or similar
hard materials
QVC 40%
Ex 8466 Parts and accessories suitable for use solely or principally with the machines of
headings 8456 to 8465, including work or
tool holders, self-opening dieheads,

dividing heads and other special
attachments for the machines; tool holders
for any type of tool for working in the
hand
QVC 40%
846691 Other: For machines of heading 8464 CTH 846692 Other: For machines of heading 8465 CTH 846693 Other: For machines of headings 8456 to 8461
CTH
846694 Other: For machines of heading 8462 or 8463:

CTH
846791 Tools for working in the hand, pneumatic,

hydraulic or with self-contained electric or
non-electric motor: Parts: Of chain saws
CTH
846792 Tools for working in the hand, pneumatic,

hydraulic or with self-contained electric or
non-electric motor: Parts: Of pneumatic
tools
CTH
846799 Tools for working in the hand, pneumatic,

hydraulic or with self-contained electric or
non-electric motor: Parts: Other
CTH
846890 Machinery and apparatus for soldering,

brazing or welding, whether or not
capable of cutting, other than those of
heading 8515; gas-operated surface
tempering machines and appliances: Parts
CTH
Ex8474 Machinery for sorting, screening,

separating, washing, crushing, grinding,

QVC 40%

HS Code 2022 Product Description PSR
mixing or kneading earth, stone, ores or
other mineral substances, in solid
(including powder or paste) form;

machinery for agglomerating, shaping or
moulding solid mineral fuels, ceramic
paste, unhardened cements, plastering
materials or other mineral products in
powder or paste form; machines for
forming foundry moulds of sand
847490 Parts CTH
847690 Automatic goods-vending machines (for
example, postage stamp, cigarette, food or
beverage machines), including money
changing machines: Parts
CTH
Ex 8477 Machinery for working rubber or plastics or for the manufacture of products from
these materials, not specified or included
elsewhere in this Chapter
QVC 40%
847790 Parts CTH
847810 Machinery for preparing or making up
tobacco, not specified or included
elsewhere in this Chapter: Machinery
QVC 40%
847890 Machinery for preparing or making up
tobacco, not specified or included
elsewhere in this Chapter: Parts
CTH
847910 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Machinery for public works, building or
the like
QVC 40%
847920 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Machinery for the extraction or
preparation of animal or fixed vegetable
or microbial fats or oils
QVC 40%
847930 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Presses for the manufacture of particle
board or fibre building board of wood or
other ligneous materials and other
machinery for treating wood or cork
QVC 40%
847940 Machines and mechanical appliances
having individual functions, not specified
QVC 40%

HS Code 2022 Product Description PSR
or included elsewhere in this Chapter:

Rope or cable-making machines
847950 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Industrial robots, not elsewhere specified
or included
QVC 40%
847981 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Other machines and mechanical
appliances: For treating metal, including
electric wire coil-winders
QVC 40%
847982 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Other machines and mechanical
appliances: Mixing, kneading, crushing,

grinding, screening, sifting,

homogenising, emulsifying or stirring
machines
QVC 40%
847990 Machines and mechanical appliances
having individual functions, not specified
or included elsewhere in this Chapter:

Parts
CTH
8480 Moulding boxes for metal foundry; mould
bases; moulding patterns; moulds for
metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber
or plastics
QVC 40%
848190 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the
like, including pressure-reducing valves
and thermostatically controlled valves:

Parts
CTH
Ex 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing
housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear
boxes and other speed changers, including
torque converters; flywheels and pulleys,

including pulley blocks; clutches and shaft
couplings (including universal joints)

QVC 40%
848390 Toothed wheels, chain sprockets and other transmission elements presented
separately; parts
CTH
HS Code 2022 Product Description PSR
8484 Gaskets and similar joints of metal
sheeting combined with other material or
of two or more layers of metal; sets or
assortments of gaskets and similar joints,

dissimilar in composition, put up in
pouches, envelopes or similar packings;

mechanical seals
CTH
8487 Machinery parts, not containing electrical connectors, insulators, coils, contacts or
other electrical features, not specified or
included elsewhere in this Chapter
CTH
Ex Chapter 85 Electrical machinery and equipment and parts thereof; sound recorders and
reproducers, television image and sound
recorders and reproducers, and parts and
accessories of such articles

CTSH + QVC 45%

Ex 8501 Electric motors and generators (excluding generating sets).

CTH + QVC 40%

850110 Motors of an output not exceeding 37.5 W CTH 850120 Universal AC/DC motors of an output
exceeding 37.5 W
CTH
850140 Other AC motors, single-phase CTH
850151 Other AC motors, multi-phase: of an
output not exceeding 750W
CTH
850152 Other AC motors, multi-phase: of an
output exceeding 750W but not exceeding
75kW
CTH
850153 Other AC motors, multi-phase: of an
output exceeding 75kW
CTH
8502 Electric generating sets and rotary
converters.

CTH + QVC 40%

8503 Parts suitable for use solely or principally with the machines of heading 8501 or
8502

CTH + QVC 40%

850421 Electrical transformers, static converters (for example, rectifiers) and inductors:

Liquid dielectric transformers: Having a
power handling capacity not exceeding
650 kVA

CTH + QVC 40%

850422 Electrical transformers, static converters (for example, rectifiers) and inductors:

Liquid dielectric transformers: Having a
power handling capacity exceeding 650
kVA but not exceeding 10,000 kVA

CTH + QVC 40%

850423 Electrical transformers, static converters CTH + QVC 40%

HS Code 2022 Product Description PSR
(for example, rectifiers) and inductors:

Liquid dielectric transformers: Having a
power handling capacity exceeding
10,000 kVA
850431 Electrical transformers, static converters (for example, rectifiers) and inductors.:

Other transformers: Having a power
handling capacity not exceeding 1 kVA

CTH + QVC 40%

850432 Electrical transformers, static converters (for example, rectifiers) and inductors.:

Other transformers: Having a power
handling capacity exceeding 1 kVA but
not exceeding 16 kVA

CTH + QVC 40%

850433 Electrical transformers, static converters (for example, rectifiers) and inductors.:

Other transformers: Having a power
handling capacity exceeding 16 kVA but
not exceeding 500 kVA

CTH + QVC 40%

850434 Electrical transformers, static converters (for example, rectifiers) and inductors.:

Other transformers: Having a power
handling capacity exceeding 500 kVA

CTH + QVC 40%

850790 Electric accumulators, including
separators therefor, whether or not
rectangular (including square).: Parts
CTH
850870 Vacuum cleaners: Parts CTH
851090 Shavers, hair clippers and hair-removing appliances, with self-contained electric
motor: Parts
CTH
851490 Industrial or laboratory electric furnaces and ovens (including those functioning by
induction or dielectric loss); other
industrial or laboratory equipment for the
heat treatment of materials by induction or
dielectric loss.: Parts

CTH + QVC 40%

851590 Electric (including electrically heated gas), laser or other light or photon beam,

ultrasonic, electron beam, magnetic pulse
or plasma arc soldering, brazing or
welding machines and apparatus, whether
or not capable of cutting; electric
machines and apparatus for hot spraying
of metals or cermets: Parts
CTH
851920 Sound recording or reproducing
apparatus: Apparatus operated by coins,

CTH
HS Code 2022 Product Description PSR
banknotes, bank cards, tokens or by other
means of payment
852990 Parts suitable for use solely or principally with the apparatus of headings 8524 to
8528: Other
CTH; or
QVC 35%
8535 Electrical apparatus for switching or
protecting electrical circuits, or for
making connections to or in electrical
circuits (for example, switches, fuses,

lightning arresters, voltage limiters, surge
suppressors, plugs and other connectors,

junction boxes), for a voltage exceeding
1,000 volts.

CTH + QVC 40 %

853610 Fuses CTH + QVC 40 %
853620 Automatic circuit breakers CTH + QVC 40 % 853641 Relays: For a voltage not exceeding 60 V CTH + QVC 40 % 853649 Relays: Other CTH + QVC 40 %
853690 Electrical apparatus for switching or
protecting electrical circuits, or for
making connections to or in electrical
circuits (for example, switches, relays,

fuses, surge suppressors, plugs, sockets,

lamp-holders and other connectors,

junction boxes), for a voltage not
exceeding 1,000 volts; connectors for
optical fibres, optical fibre bundles or
cables: Other apparatus

CTH + QVC 40 %

8537 Boards, panels, consoles, desks, cabinets and other bases, equipped with two or
more apparatus of heading 8535 or 8536,

for electric control or the distribution of
electricity, including those incorporating
instruments or apparatus of HS Chapter
90, and numerical control apparatus, other
than switching apparatus of heading 8517

CTH + QVC 40 %

8538 Parts suitable for use solely or principally with the apparatus of heading 8535, 8536
or 8537

CTH + QVC 40%

853990 Light-emitting diode (LED) light sources:

Parts

CTH + QVC 40 %

854160 Mounted Piezo-Electric Crystals CTSH + QVC 35% 854411 Insulated (including enamelled or
anodised) wire, cable (including co-axial
cable) and other insulated electric
conductors, whether or not fitted with
CTH
HS Code 2022 Product Description PSR
connectors; optical fibre cables, made up
of individually sheathed fibres, whether or
not assembled with electric conductors or
fitted with connectors: winding wire, of
copper
854419 Insulated (including enamelled or
anodised) wire, cable (including co-axial
cable) and other insulated electric
conductors, whether or not fitted with
connectors; optical fibre cables, made up
of individually sheathed fibres, whether or
not assembled with electric conductors or
fitted with connectors: winding wire:

Other
CTH
854430 Insulated (including enamelled or
anodised) wire, cable (including co-axial
cable) and other insulated electric
conductors, whether or not fitted with
connectors; optical fibre cables, made up
of individually sheathed fibres, whether or
not assembled with electric conductors or
fitted with connectors; ignition wiring sets
and other wiring sets of a kind used in
vehicles, aircraft or ships
CTH
854442 Insulated (including enamelled or
anodised) wire, cable (including co-axial
cable) and other insulated electric
conductors, whether or not fitted with
connectors; optical fibre cables, made up
of individually sheathed fibres, whether or
not assembled with electric conductors or
fitted with connectors: Other electric
conductors, for a voltage not exceeding
1,000 V: Fitted with connectors
CTH
854449 Insulated (including enamelled or
anodised) wire, cable (including co-axial
cable) and other insulated electric
conductors, whether or not fitted with
connectors; optical fibre cables, made up
of individually sheathed fibres, whether or
not assembled with electric conductors or
fitted with connectors: Other electric
conductors; for a voltage not exceeding
1000 volts: Other
CTH
854610 Electrical insulators; of glass CTH
Ex Chapter 86 Railway, tramway locomotives, rolling- CTSH + QVC 45%

HS Code 2022 Product Description PSR
stock and parts thereof; railway or
tramway track fixtures and fittings and
parts thereof; mechanical (including
electro-mechanical) traffic signalling
equipment of all kinds
8608 Railway or tramway track fixtures and
fittings; mechanical (including electromechanical) signalling, safety or traffic
control equipment for railways, tramways,

roads, inland waterways, parking
facilities, port installations or airfields;

parts thereof
CC
Ex Chapter 87 Vehicles; other than railway or tramway rolling-stock, and parts and accessories
thereof

CTSH + QVC 45%

8712 Bicycles and other cycles (including
delivery tricycles), not motorised
CTH
8713 Carriages for disabled persons; whether or not motorised or otherwise mechanically
propelled
CTH
871420 Parts and accessories of vehicles of
headings 8711 to 8713: Carriages for
disabled persons
CTH
871491 Parts and accessories of vehicles of
headings 8711 to 8713: Other: frames and
forks, and parts thereof
CTH
871492 Parts and accessories of vehicles of
headings 8711 to 8713: Other:, wheel rims
and spokes
CTH
871493 Parts and accessories of vehicles of
headings 8711 to 8713: Other: hubs, other
than coaster braking hubs and hub brakes
and free-wheel sprocket-wheels
CTH
871494 Parts and accessories of vehicles of
headings 8711 to 8713: Other: brakes,

including coaster braking hubs and hubbrakes, and parts thereof
CTH
871495 Parts and accessories of vehicles of
headings 8711 to 8713: Other: saddles
CTH
871496 Parts and accessories of vehicles of
headings 8711 to 8713: Other: Pedals and
crank-gear, and parts thereof
CTH
871499 Parts and accessories of vehicles of
headings 8711 to 8713: - Other: Other
CTH
Chapter 88 Aircraft, spacecraft, and parts thereof CTSH + QVC 45%

HS Code 2022 Product Description PSR
Chapter 89 Ships, boats and floating structures CTSH + QVC 45% Ex Chapter 90 Optical, photographic, cinematographic,

measuring, checking, medical or surgical
instruments and apparatus; parts and
accessories

CTSH + QVC 45%

900110 Optical fibres and optical fibre bundles;

optical fibre cables other than those of
heading 8544; sheets and plates of
polarising material; lenses (including
contact lenses), prisms, mirrors and other
optical elements, of any material,

unmounted, other than such elements of
glass not optically worked.: Optical fibres,

optical fibre bundles and cables
CTH or QVC 35%
900390 Frames and mountings for spectacles,

goggles or the like, and parts thereof:

Parts
CTH
9004 Spectacles, goggles and the like;

corrective, protective or other
CTH
901090 Apparatus and equipment for
photographic (including cinematographic)

laboratories, not specified or included
elsewhere in this Chapter; negatoscopes;

projection screens.: Parts and accessories
CTH
901910 Mechano-therapy appliances; massage
apparatus and psychological aptitudetesting apparatus
CTSH; or
QVC 45%
901920 Ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other
therapeutic respiration apparatus.

CTSH; or
QVC 45%
9021 Orthopaedic appliances, including
crutches, surgical belts and trusses; splints and other fracture appliances; artificial
parts of the body; hearing aids and other
appliances which are worn or carried, or
implanted in the body, to compensate for
a defect or disability
CTSH; or
QVC 45%
902511 Thermometers and pyrometers, not
combined with other instruments: Liquidfilled, for direct reading
CTSH; or
QVC 45%
903290 Automatic regulating or controlling
instruments and apparatus: Parts and
accessories
CTH
Ex Chapter 91 Clocks and watches and parts thereof CTSH + QVC 45% 911390 Watch straps, watch bands, watch CTH
HS Code 2022 Product Description PSR
bracelets, and parts thereof: Other
Chapter 92 Musical instruments; parts and accessories of such articles

CTSH + QVC 45%

Chapter 93 Arms and ammunition; parts and
accessories thereof

CTSH + QVC 45%

Ex Chapter 94 Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed
furnishings; luminaires and lighting
fittings, not elsewhere specified or
included; illuminated signs, illuminated
name-plates and the like; prefabricated
buildings

CTSH + QVC 45%

940191 Seats (other than those of heading 9402),

whether or not convertible into beds, and
parts thereof: parts: of wood
CTH
940199 Seats (other than those of heading 9402),

whether or not convertible into beds, and
parts thereof: parts: other
CTH
940391 Other furniture and parts thereof: parts: of wood
CTH
940399 Other furniture and parts thereof: parts:

other
CTH
940421 Mattresses; of cellular rubber or plastics,

whether or not covered
CTH
940429 Mattresses; of other materials CTH
940591 Luminaires and lighting fittings including searchlights and spotlights and parts
thereof, not elsewhere specified or
included; illuminated signs, illuminated
name-plates and the like, having a
permanently fixed light source, and parts
thereof not elsewhere specified or
included: Parts: of glass
CTH
940592 Luminaires and lighting fittings including searchlights and spotlights and parts
thereof, not elsewhere specified or
included; illuminated signs, illuminated
name-plates and the like, having a
permanently fixed light source, and parts
thereof not elsewhere specified or
included: Parts: of plastics
CTH
940599 Luminaires and lighting fittings including searchlights and spotlights and parts
thereof, not elsewhere specified or
included; illuminated signs, illuminated
CTH
HS Code 2022 Product Description PSR
name-plates and the like, having a
permanently fixed light source, and parts
thereof not elsewhere specified or
included: Parts: Other
9406 Prefabricated buildings. CTH
Ex Chapter 95 Toys, games and sports requisites; parts and accessories thereof
CTH
9503 Tricycles, scooters, pedal cars and similar wheeled toys; dolls' carriages; dolls; other
toys; reduced-size (scale) models and
similar recreational models, working or
not; puzzles of all kinds

CTSH + QVC 45%

9506 Articles and equipment for general
physical exercise, gymnastics, athletics,

other sports (including table-tennis) or
outdoor games, not specified or included
elsewhere in this Chapter; swimming
pools and paddling pools.

CTSH + QVC 45%

Ex Chapter 96 Miscellaneous manufactured articles CTH 9601 Worked ivory, bone, tortoise-shell, horn,

antlers, coral, mother-of-pearl and other
animal carving material, and articles of
these materials (including articles
obtained by moulding)

CTSH + QVC 45%

9602 Worked vegetable or mineral carving
material and articles of these materials
moulded or carved articles of wax, of
stearin, of natural gums or natural resins
or of modelling pastes, and other moulded
or carved articles, not elsewhere specified
or included; worked, unhardened gelatin
(except gelatin of heading 3503) and
articles of unhardened gelatin
CTSH or QVC
40%
960310 Brooms and brushes; consisting of twigs or other vegetable materials bound
together, with or without handles

CTSH + QVC 45%

960610 Press-fasteners, snap-fasteners, pressstuds and parts therefor

CTSH + QVC 45%

960622 Buttons; of base metal, not covered with textile material

CTSH + QVC 45%

960711 Slide fasteners and parts thereof - Slide fasteners: Fitted with chain scoops of base
meta

CTSH + QVC 45%

960719 Slide fasteners and parts thereof - Slide fasteners: Other

CTSH + QVC 45%

HS Code 2022 Product Description PSR
Ex 9613 Cigarette lighters and other lighters,

whether or not mechanical or electrical
and parts thereof other than flints and
wicks

CTSH + QVC 45%

961390 Cigarette lighters and other lighters,

whether or not mechanical or electrical,

and parts thereof other than flints and
wicks: parts
CTH
9614 Smoking pipes (including pipe bowls) and cigar or cigarette holders and parts thereof

CTSH + QVC 45%

9617 Vacuum flasks and other vacuum vessels,

complete with cases; parts thereof other
than glass inners

CTSH + QVC 45%

9619 Sanitary towels (pads) and tampons,

napkins (diapers), napkin liners and
similar articles, of any material
CTSH or QVC
40%
Chapter 97 Works of art; collectors' pieces and antiques

CTSH + QVC 45%

Annexure-B
[See clause (d) of sub-rule (3) of rule 16]

(Certificate of Origin Template)

1. Exporter’s Name, Address, and Country:

Certification number:

Page number:

Total number of pages:

INDIA-NEW ZEALAND

FREE TRADE AGREEMENT

CERTIFICATE OF ORIGIN

Issued in (country):

2. Producer’s Name, Address, and Country:

3. Importer or Consignee’s Name, Address and
Country:

4. Transport details (if known)

Shipment date:

Vessel name and
voyage/flight number:

Port of loading:

Port of destination:

5. Third party invoice: ☐
(name and country if known/applicable)

6. Remarks (if applicable):

7. Single or Multiple shipment:

☐ Single shipment; or ☐ Multiple shipments of identical goods.

8. Item
number

9.1 HS
code (sixdigit level)

9.2
Description of
good(s)

9.3 Marks
and
numbers

9.4 Number
and kind of
packages

10. Origin
Criteria (see
overleaf note)

11. Gross
weight or other
unit of
measurement
(as appropriate)

12. Invoice
number(s)

and date(s)

☐ WO
☐ CTC
☐ QVC
☐ Process
Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process
Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process
Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

13. Declaration by the exporter:

I, the undersigned, declare that the above details and statement are true and accurate, the good(s) described above meet the condition(s) required for the issuance of this certificate, and the country of origin of the good(s) described above is
Place and Date:

Signature:

Name (printed):

Company:

14. Certification
It is hereby certified, on the basis of control carried out, that the declaration by the exporter is correct.

Export Document Number:

Issuing Authority:

[Stamp]

Place and Date:

Signature:

Continuation Sheet
Certification number: Page number:

Total number of pages:

8. Item
number

9.1 HS
code (sixdigit level)

9.2
Description of
good(s)

9.3 Marks
and
numbers

9.4 Number
and kind of
packages

10. Origin
Criteria (see
overleaf note)

11. Gross
weight or other
unit of
measurement
(as appropriate)

12. Invoice
number(s)

and date(s)

☐ WO
☐ CTC
☐ QVC
☐ Process
Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process
Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process
Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

13. Declaration by the exporter:

I, the undersigned, declare that the above details and statement are true and accurate, the good(s) described above meet the condition(s) required for the issuance of this certificate, and the country of origin of the good(s) described above is
Place and Date:

Signature:

Name (printed):

Company:

14. Certification
It is hereby certified, on the basis of control carried out, that the declaration by the exporter is correct.

Export Document Number:

Issuing Authority:

[Stamp]

Place and Date:

Signature:

Overleaf Notes:

Box 1: These details are not required if the producer is the signatory and the exporters details are not known.

Box 2: The address must be in the party where the good is produced. If the producer is the signatory they must be located in India or New Zealand. Box 5: In the case where invoices are issued by a third party, the “third party invoice” box should be marked and, if known, information, such as the name and address of the company issuing the invoice shall be indicated.

Box 6: This box shall bear observations made by the country of exportation, e.g.: “ISSUED RETROSPECTIVELY” If the certificate of origin has been issued or completed retrospectively, in accordance with sub-rule (10) of rule 16. A short explanation of the reason(s) shall also be provided. Such as, for example, because the importer did not request the certificate of origin earlier.

In case of theft, loss, or destruction of the certificate of origin, indicate “CERTIFIED TRUE COPY” and the number and date of issuance of the original Certificate of Origin shall also be provided.

Box 7: for Indian exporter or producers only, as per sub-rule (4) of rule 16. Box 9.2: Provide a full description of each good. The description should be sufficiently detailed to enable the products to be identified by the Customs officers examining them. Box 10: Mark all origin criteria. Mark multiple where multiple requirements exist. Box 11: Gross weight in kilograms should be shown here, or other units of measurement may be used when customary e.g. volume or number of items which would indicate exact quantities.

Annexure-C
[See clause (d) of sub-rule (3) of rule 16]

(Origin Declaration Template)

1. Exporter’s Name, Address, and Country:

Unique Identification Number:

Page number:

Total number of pages:

INDIA-NEW ZEALAND

FREE TRADE AGREEMENT

ORIGIN DECLARATION

Issued in (country):

2. Importer or Consignee’s Name, Address and Country:

3. Transport details (if known)

Shipment date:

Vessel name and
voyage/flight number:

Port of loading:

Port of destination:

4. Third party invoice: ☐
(name and country if known/applicable)

5. Remarks (if applicable):

6. Single or Multiple shipment:

☐ Single shipment; or ☐ Multiple shipments of identical goods.

7. Item
number

8.1 HS
code
(six-digit
level)

8.2
Description of
good(s)

8.3 Marks
and
numbers

8.4 Number
and kind of
packages

9. Origin
Criteria (see
overleaf note)

10. Gross weight
or other unit of
measurement (as
appropriate)

11. Invoice
number(s)

and date(s)

☐ WO
☐ CTC
☐ QVC
☐ Process Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

12. Declaration by the approved exporter / status holder: I, the undersigned, declare that the above details and statement are true and accurate, the good(s) described above meet the condition(s) required for the issuance of this certificate, and the country of origin of the good(s) described above is:

Place and Date:

Signature:

Name (printed):

Company:

Approved Exporter Authorisation/ Status Holder Certificate Number:

Continuation Sheet
Unique Identification Number: Page number:

Total number of pages:

7. Item
number

8.1 HS
code
(six-digit
level)

8.2
Description of
good(s)

8.3 Marks
and
numbers

8.4 Number
and kind of
packages

9. Origin
Criteria (see
overleaf note)

10. Gross weight
or other unit of
measurement (as
appropriate)

11. Invoice
number(s)

and date(s)

☐ WO
☐ CTC
☐ QVC
☐ Process Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

☐ WO
☐ CTC
☐ QVC
☐ Process Rule
☐ De Minimis
(if applicable)

☐ Cumulation
(if applicable)

12. Declaration by the approved exporter / status holder: I, the undersigned, declare that the above details and statement are true and accurate, the good(s) described above meet the condition(s) required for the issuance of this certificate, and the country of origin of the good(s) described above is:

Place and Date:

Signature:

Name (printed):

Company:

Approved Exporter Authorisation/ Status Holder Certificate Number:

Overleaf Notes:

Box 4: In the case where invoices are issued by a third party, the “third party invoice” box should be marked and, if known, information, such as the name and address of the company issuing the invoice shall be indicated.

Box 5: This box shall bear observations made by the country of exportation, e.g.:

“ISSUED RETROSPECTIVELY ” If the Origin Declaration has been issued or completed retrospectively, in accordance with sub-rule (10) of rule 16. A short explanation of the reason(s) shall also be provided. Such as, for example, because the importer did not request the origin declaration earlier.

Box 6: for Indian status holders only, as per sub-rule (4) of rule 16. Box 8.2: Provide a full description of each good. The description should be sufficiently detailed to enable the products to be identified by the Customs officers examining them. Box 9: Mark all origin criteria. Mark multiple where multiple requirements exist. Box 10: Gross weight in kilograms should be shown here, or other units of measurement may be used when customary e.g. volume or number of items which would indicate exact quantities.

[F.No. CBIC-15021/26/2025-ICD-CBEC]

(Indrajit Panda)

Under Secretary to the Government of India

Source: Central Board of Indirect Taxes and Customs (CBIC). View the official document.