Skip to main content

Notification · Customs

Notification No. 62/2026-Customs (NT), DT. 03/07/2026

Dated
03 Jul 2026
Reference no.
62/2026-Customs (NT)

Customs Tariff (Determination of Origin of Goods under the Comprehensive Economic and Trade Agreement between India and the United Kingdom of Great Britain & Northern Ireland) Rules, 2026.

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II,

SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA

MINISTRY OF FINANCE

(DEPARTMENT OF REVENUE)

(CENTRAL BOARD OF INDIRECT TAXES AND CUSTOMS)

Notification No. 62/2026 -Customs (N.T.)

New Delhi, the 3rd July, 2026.

G.S.R. (E).- In exercise of the powers conferred by sub-section (1) of section 5 of the Customs Tariff Act, 1975 (51 of 1975), the Central Government hereby makes the following rules, namely: -

1. Short title and commencement. - (1) These rules may be called the Customs Tariff (Determination of Origin of Goods under Comprehensive Economic and Trade Agreement between India and the United Kingdom of Great Britain and Northern Ireland) Rules, 2026.

(2) They shall come into force on the 15th July, 2026.

2. Definitions. - In these rules, unless the context otherwise requires, -

(a) “Agreement” means the Comprehensive Economic and Trade Agreement between the Government of the Republic of India and the Government of the United Kingdom of Great Britain and Northern Ireland signed on the 24th July, 2025;

(b) “Annexure” means the annexures appended to these rules;

(c) “aquaculture” means the farming of aquatic organisms, including fish, molluscs, crustaceans, other aquatic invertebrates and aquatic plants, from seed stock, including seed stock imported from non-Parties, such as eggs, fry, fingerlings, larvae, parr, smolts or other immature fish at a post-larval stage, by intervention in the rearing or growth processes to enhance production such as regular stocking, feeding or protection from predators;

(d) “carrier” means any vehicle for air, sea or land transport. However, the carriage of product can be made through multimodal transport;

(e) “competent authority” means,-

(i) for India, in the case of exports from India, the Department of Commerce or agencies notified to issue the certificate of origin; and in the case of imports into India, the Central Board of Indirect Taxes and Customs or any of its successors; and

(ii) for the United Kingdom, its customs authority as defined in Article 1.4 (General Definitions - Initial Provisions and General Definitions);

(f) “exporter” means a person, located in a Party, who, exports a good in accordance with the requirements laid down in the laws and regulations of that Party;

(g) “fungible goods” or “fungible materials” means goods or materials that are interchangeable for commercial purposes and the properties of which are essentially identical;

(h) “generally accepted accounting principles” means the principles recognised by consensus or with substantial authoritative support in the territory of a Party with respect to the recording of revenues, expenses, costs, assets and liabilities, the disclosure of information and the preparation of financial statements. These principles may encompass broad guidelines for general application, as well as detailed standards, practices, and procedures;

(i) “indirect material” means a material used in the production, testing or inspection of a good but not physically incorporated into the good or a material used in the maintenance of buildings or the operation of equipment, associated with the production of a good, including,-

(i) fuel, energy, catalysts and solvents;

(ii) equipment, devices and supplies used to test or inspect the good;

(iii) gloves, glasses, footwear, clothing, safety equipment and supplies;

(iv) tools, dies and moulds;

(v) spare parts and materials used in the maintenance of equipment buildings;

(vi) lubricants, greases, compounding materials and other materials used in production or used to operate equipment buildings; and

(vii) any other material that is not incorporated into the good but the use of which in the production of the good can reasonably be demonstrated to be a part of that production;

(j) “issuing authority” means the authorities in India designated for issuance of certificates of origin;

(k) “material” means any good, including ingredients, raw inputs, components or parts used in the production of another good and physically incorporated into it;

(l) “net weight” means the weight of the material or good excluding the weight of any packaging;

(m) “non-originating good” or “non-originating material” means a good or material that does not qualify as originating, including those of unprovable origin, in accordance with these rules;

(n) “originating good” or “originating material” means a good or material that qualifies as originating in accordance with these rules;

(o) “Party” means the Government of Republic of India or the Government of the United Kingdom of Great Britain and Northern Ireland and jointly as Parties;

(p) “producer” means a person who engages in the production of a good;

(q) “production” means operations including growing, cultivating, raising, mining, harvesting, fishing, trapping, hunting, capturing, collecting, breeding, extracting, aquaculture, gathering, manufacturing, working, processing or assembling a good other than simple assembly;

Explanation: “simple assembly” means an activity which neither requires special skills nor machines, apparatus or equipment especially produced or installed to carry out the activity;

(r) “tariff classification” means the classification of a good according to the Harmonized System;

(s) “territorial sea” means waters extending up to twelve nautical miles from the baseline as defined by the Parties in line with the United Nations Convention on the Law of the Sea, 1982; and

(t) “Working Group on Rules of Origin” means the Working Group on Rules of Origin established in sub-rule (1) of rule 29.

3. Origin Criteria.- Except as otherwise provided in these rules, each Party shall provide that a good is originating, if it is--

(a) wholly obtained or produced entirely in the territory of one or both of the Parties as specified in rule 4;

(b) produced entirely in the territory of one or both of the Parties, exclusively from originating materials; or

(c) produced entirely in the territory of one or both of the Parties using nonoriginating materials, provided the good satisfies all applicable requirements of Annexure-A,

in each case, provided the good satisfies all other applicable requirements of these rules.

Explanation: For greater clarity, final production of a good must have occurred in the exporting Party, except those activities as specified in clause (b) of sub-rule (2) of rule 15.

4. Wholly Obtained.- Each Party shall specify that for the purposes of clause (a) of rule 3 the following goods shall be considered as wholly obtained or produced entirely in one or both of the Parties, if they are--

(a) minerals, mineral goods and other non-living natural resources extracted or taken from there;

(b) plant and plant goods, including fruits, flowers, vegetables, trees, seaweed, and live plants or fungi or algae, grown, harvested, cultivated, picked or gathered there;

(c) live animals born and raised there;

(d) goods obtained from live animals raised
there;

Explanation: For greater clarity, this includes heifers imported into a Party and then raised there;

(e) goods obtained by hunting, trapping, fishing or aquaculture conducted there, but not beyond the outer limits of a Party’s territorial sea;

(f) fish, shellfish and other marine life taken from the sea, seabed or subsoil outside the territorial sea of each Party and outside the territorial sea of non- Parties in accordance with the international law, by vessels that are registered with a Party and entitled to fly the flag of that Party;

(g) a good produced from the goods referred to in clause (f) on a factory ship that is registered with a Party and entitled to fly the flag of that Party;

(h) minerals, mineral goods and other non-living natural resources, taken or extracted from the seabed or subsoil, outside the territories of the Parties, and beyond areas over which non-Parties exercise jurisdiction; provided that that Party or person of the Party has rights to exploit such seabed or subsoil;

(i) a good, excluding precious metals, that is--

(i) waste or scrap derived from consumption or production there; or

(ii) waste or scrap derived from used goods collected there,

provided that those goods are fit only for the recovery of raw materials; or

(j) goods and their derivatives produced there exclusively from goods referred to in clause (a) through (i).

5. Value of the Good.- (1) For the purposes of these rules, each Party shall specify that the value of the good may be ex-works price or free-on-board (FOB) value.

(2) The ex-works price is either;-

(a) the price paid or payable for the good to the producer at the place where the last production was carried out and shall include the value of all materials; or

(b) the price actually paid or payable for the good when sold for export.

(3) In case no price is paid or payable or if it does not include the value of all materials, the ex-works price;-

(a) shall include the value of all materials and the cost of production employed in producing the good, calculated in accordance with the generally accepted accounting principles; and

(b) may include amounts for general expenses and profit to the producer that can be reasonably allocated to the good.

(4) For the purposes of calculating the value of the good in accordance with sub-rule (2) or sub-rule (3), the ex-works price shall;-

(a) not take into account any internal taxes which are, or may be, repaid when the good obtained is exported; and

(b) exclude any costs incurred subsequent to the good leaving the place where the last production was carried out, such as transportation, loading, unloading, handling or insurance.

(5) The free-on-board value shall be the price actually paid or payable to the exporter for a good when loaded onto the carrier at the named port of exportation, including the cost of the product and all costs required to bring the good onto the carrier, not taking into account any internal taxes which are or may be repaid when the good obtained is exported.

6. Qualifying Value Content.- (1) Where Annexure-A specifies a qualifying value content test to determine whether a good is originating, each Party shall provide that the qualifying value content (QVC) shall be calculated using one of the following methods:

(a) Build-Down Method: based on the value of non-originating materials value of the good-value of non‐originating materials QVC= × 100;

value of the good

(b) Build-Up Method: based on the value of originating materials Value of originating materials
QVC = × 100,

Value of the good
where, QVC is the qualifying value content of a good, expressed as a percentage.

(2) Each Party shall provide that the value of a material shall be--

(a) for a material imported by the producer of the good, the price actually paid or payable for the material at the time of importation, or other value determined in accordance with the Customs Valuation Agreement, including the costs incurred in transporting the material to the port or place of importation, such as transportation, loading, unloading, handling or insurance;

(b) for a material acquired in the territory where the good is produced--

(i) the price paid or payable by the producer in the Party where the producer is located;

(ii) the value as determined for an imported
material in clause (a); or

(iii) the earliest ascertainable price paid or payable in the territory of the Party; or

(c) for a material that is self-produced, all the costs incurred in the production of the material, which includes general expenses.

(3) For an originating material, the following expenses may be added to the value of the material, if not included under sub-rule (2) :--

(a) the costs of freight, insurance, packing and all other costs incurred to transport the material to the location of the producer of the good;

(b) duties, taxes and customs brokerage fees on the material paid in the territory of a Party, other than duties and taxes that are waived, refunded, refundable or otherwise recoverable, which include credit against duty or tax paid or payable; and

(c) the cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of reusable scrap or by- product.

(4) For a non-originating material or material of undetermined origin, the following expenses, where included under sub-rule (2), may be deducted from the value of the material :--

(a) the costs of freight, insurance, packing and all other costs incurred in transporting the material to the location of the producer of the good;

(b) duties, taxes, and customs brokerage fees on the material paid in the territory of one or both Parties, other than duties and taxes that are waived, refunded, refundable or otherwise recoverable, which include credit against duty or tax paid or payable; and

(c) the cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of reusable scrap or by- product.

(5) If the cost or expense specified in sub-rule (3) or (4) is unknown or documentary evidence of the amount of the adjustment is not available, then no adjustment is allowed for that particular cost or expense.

7. Materials Used in Production.- (1) Each Party shall provide that if a non-originating material undergoes further production such that it satisfies the requirements of these rules, the material is treated as originating when determining the originating status of the subsequently produced good, regardless of whether that material was produced by the producer of the good.

(2) Each Party shall provide that if a non-originating material is used in the production of a good, the following may be counted as originating content in determining whether the resulting good meets a qualifying value content requirement:--

(a) the value of processing of the non-originating material undertaken in the territory of the exporting party; and

(b) the value of any originating material used in the production of the nonoriginating material undertaken in the territory of one or both of the Parties.

8. Non-Qualifying Operations.- (1) Each Party shall provide that, notwithstanding anything contained in these rules, a good shall not be considered to be originating merely by undergoing any of the following operations in the territory of that Party:--

(a) operations to ensure the preservation of products in good condition during transport and storage (such as drying, freezing or thawing, keeping in brine, removal of damaged parts) and other similar operations;

(b) changes of packaging and breaking up and assembly of packages;

(c) washing, cleaning, removal of dust, oxide, oil, paint or other coverings;

(d) for textiles: attaching accessory articles such as straps, bands, beads, cords, rings and eyelets; ironing or pressing of textiles;

(e) simple painting and polishing;

(f) husking, partial or total bleaching, polishing and glazing of cereals and rice;

(g) operations to colour sugar or form sugar lumps;

(h) peeling and removal of stones and shells from fruits, nuts and vegetables;

(i) sharpening, simple grinding or simple cutting;

(j) simple operations such as removal of dust, sifting, screening, sorting, classifying, grading or matching;

(k) simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;

(l) affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;

(m) simple mixing of goods, whether or not of different kinds; mixing of sugar or any other sweetening matter to any good;

(n) simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;

(o) slaughter of animals;

(p) simple testing, calibration, inspection or certification;

(q) dilution with water or another substance that does not materially alter the characteristics of the good;

(r) a production or pricing practice in respect of which it may be demonstrated, on the basis of a preponderance of evidence, that the object was to circumvent the provisions of these rules; or

(s) any combination of two or more operations specified in clauses (a) to (r).

(2) For the purposes of this rule, the expression “simple” describes an activity which needs neither special skills nor machines, apparatus or equipment especially produced or installed to carry out the activity.

9. Cumulation.- Each Party shall provide that an originating good or material in the territory of one Party, under the terms of rule 3 (Origin Criteria) and all the other applicable requirements of these rules, that is incorporated in the production of a good in the territory of the other Party is considered to originate in the territory of the other Party.

10. Tolerance.- (1) Each Party shall provide that a good containing non-originating materials that does not satisfy the applicable change in tariff classification requirement or wholly obtained requirement specified in Annexure-A for the good is nonetheless originating, if:--

(a) in the case of a good in Chapters 1 to 3, 5, 6, 10 and 14 of the Harmonized System:

(i) the value of those non-originating materials does not exceed 7.5 per cent of the value of the good; or

(ii) the net weight of those non-originating materials does not exceed

7.5 per cent of the net weight of the good;

and the good satisfies all other applicable requirements of these rules;

(b) in the case of a good in Chapters 4, 7 to 9, 11 to 13 and 15 to 24 of the Harmonized System:

(i) the value of those non-originating materials does not exceed 12.5 per cent of the value of the good; or

(ii) the net weight of those non-originating materials does not exceed

12.5 per cent of the net weight of the good;

and the good satisfies all other applicable requirements of these rules; or

(c) in the case of a good in Chapters 25 to 98 of the Harmonized System, the value of those non-originating materials does not exceed 12.5 per cent of the value of the good and the good satisfies all other applicable requirements of these rules.

(2) If a good is also subject to a qualifying value content requirement, the value of those non-originating materials shall be included in the value of non-originating materials for any applicable qualifying value content requirement.

11. Fungible Goods and Materials.- (1) Each Party shall provide that a fungible good or material is treated as originating based on the:

(a) physical segregation of each fungible good or material; or

(b) use of any inventory management method recognised in the generally accepted accounting principles of the Party where the production is performed, if the fungible good or material is commingled, provided that the inventory management method selected is used throughout the fiscal year of the person that selected the inventory management method.

(2) The inventory management method chosen must:--

(a) allow a clear distinction to be made between originating and nonoriginating materials including materials of undetermined origin acquired or kept in stock; and

(b) ensure that, over the relevant accounting period of twelve months, no more goods or materials receive originating status than would have been the case, if the fungible goods or materials had been physically segregated.

(3) For greater certainty and in accordance with clause (b) of sub-rule (1) of rule 25, a producer using an inventory management system shall keep records of the operation of the system that are necessary for the authority of the Party concerned to verify compliance with the provisions of these rules.

12. Accessories, Spare Parts or Tools.- (1) Each Party shall provide that the origin of the accessories, spare parts, tools or instructional or other information materials presented with a good shall be--

(a) disregarded in determining whether a good satisfies a process or change in tariff classification or wholly obtained requirement for the good; and

(b) taken into account as originating or non-originating materials, as the case may be, in calculating the qualifying value content of the good, if the good is subject to a qualifying value content requirement.

(2) Sub-rule (1) shall apply only in such cases where:--

(a) the accessories, spare parts, tools and instructional or other information materials presented with the good are not invoiced separately from the good; and

(b) the quantities and value of the accessories, spare parts, tools and instructional or other information materials presented with the good are customary for that good.

13. Packaging and Packing Materials.- (1) Each Party shall provide that for the purpose of determining whether a good is originating, packaging and packing materials and containers in which a good is packaged for retail sale shall, if classified with the good, be:--

(a) disregarded in determining whether a good satisfies a process or change in tariff classification or wholly obtained requirement for the good; and

(b) taken into account as originating or non-originating materials, as the case may be, in calculating the QVC of the good.

(2) Each Party shall provide that packaging and packing materials and containers used for the shipment of a good shall be disregarded in determining the origin of goods.

14. Indirect Materials.- Indirect materials shall neither be considered originating nor nonoriginating for the purposes of calculating QVC specified in rule 6.

15. Non-Alteration.- (1) Each Party shall provide that an originating good retains its originating status if the good has been transported to the importing Party without passing through the territory of a non-Party.

(2) Each Party shall provide that an originating good transported through or stored in a non-Party shall retain its originating status provided it:

(a) remains under customs control, such as in a warehouse, and is not released to free circulation or trade
in the territory of any non-Party; and

Explanation: For greater clarity, free circulation includes trade or consumption;

(b) does not undergo further production or any other operation outside the territories of the Parties, other than unloading, reloading, splitting up of loads, separation from bulk, storing, labelling, marking, bottling or any operation necessary to preserve it in good condition;

Explanation: For greater certainty, bottling applies only to filling into bottles from bulk of goods of heading 2208 of the Harmonized System and where appropriate mere dilution with water that does not alter the origin of the bottled good.

(3) An importer shall provide to the customs authority of the importing Party upon request:--

(a) information, including documentation, demonstrating that the conditions specified in sub-rule (2) have been fulfilled; and

(b) where bottling has taken place in a non-Party, transportation documents and commercial documents indicating the entire transport route of the good from the exporting party to the importing party and information including documentation demonstrating that the good remained under customs control, such as a non-manipulation certificate issued by a customs authority in the non-party.

16. Proof of Origin.- (1) Each Party shall provide that a claim for preferential tariff treatment is based on an applicable proof of origin:--

(a) for importers in the United Kingdom, an applicable proof of origin shall be:

(i) an origin declaration completed by the exporter or producer;

(ii) a certificate of origin issued by an issuing authority; or

(iii) the importer’s knowledge that the good is originating; and

(b) for importers in India, an applicable proof of origin shall be an origin declaration completed by the exporter or producer.

(2) Each Party shall provide that an origin declaration or a certificate of origin:

(a) is valid for twelve months from the date of completion in the case of an origin declaration, or date of issue in the case of a certificate of origin or for such longer period specified by the laws and regulations of the importing Party;

(b) is submitted to the customs authority of the importing Party in accordance with the laws and regulations of the importing Party;

(c) shall follow the structure in Annexure-B or Annexure-C, as the case maybe;

(d) must be in writing including electronic format;

(e) must be accompanied by an invoice or any other commercial document that describes the goods concerned in sufficient detail to enable them to be identified;

(f) may apply to importations of a single shipment of one or more goods; and

(g) shall be in the English language.

(3) For the United Kingdom, an origin declaration or a certificate of origin may apply to importations of multiple shipments of identical goods within any period specified in the origin declaration or the certificate of origin, where such period does not exceed twelve months.

(4) In exceptional circumstances, the customs authority of the importing Party may accept a proof of origin for the purpose of granting preferential tariff treatment even after the expiry of its validity provided the failure to observe the time limit results from force majeure or other valid reasons beyond the control of the exporter and the goods have been imported before the expiry of the validity period.

(5) An importing Party shall not deny a claim for preferential tariff treatment for the sole reason that an invoice or other commercial document referred to in clause (e) of subrule (2) was issued in a non-Party or not issued by the exporter or producer of a good, provided that it meets the requirements in these rules.

(6) Subject to sub-rule (7), each Party shall provide that a proof of origin shall be issued or completed prior to or at the time of importation.

(7) Notwithstanding anything contained in sub-rule (6), a proof of origin may be completed after importation, provided that the good was originating at the time of importation in order to qualify for a late claim as specified in rule 21. A proof of origin completed after importation shall bear the words “completed retrospectively” and shall include an explanation as to why the proof of origin is completed retrospectively.

(8) A late claim made in accordance with rule 21 shall not be rejected based on the

explanation referenced in sub-rule (7), if the good was originating at the time of importation.

(9) If unassembled or disassembled goods within the meaning of General Rule 2(a) of the Harmonized System are imported by more than one shipment, a single origin declaration for such goods may be used on request of the importer and in accordance with the requirement laid down by the customs authority of the importing Party.

Explanation: For India, this includes a requirement to use a single import declaration for such goods.

17. Basis of a Claim for Preferential Tariff Treatment.- (1) The United Kingdom shall provide that if the importer of a good makes a claim for preferential tariff treatment based on the importer’s knowledge that the good is originating, the claim is made subject to the importer having documentation demonstrating that the good is originating. Such documentation may have been provided to the importer by the exporter, producer or any other person.

(2) Each Party shall provide that if a producer declares the origin of a good, the origin declaration is completed on the basis of the producer having information that the good is originating.

(3) Each Party shall provide that, if the exporter is not the producer of the good and the exporter declares the origin of a good, the origin declaration is completed on the basis of the exporter having information to demonstrate that the good is originating, which may include a reliance on the producer’s information.

(4) India shall provide that if the issuing authority issues a certificate of origin, the certificate of origin is issued on the basis of the issuing authority receiving information that the good is originating from the exporter or the producer.

(5) For greater certainty, nothing in this rule shall be construed to allow the importing Party to require an importer to request the exporter or producer to provide confidential information to the importer.

(6) For the purpose of enabling India to establish the authenticity of an origin declaration prior to an Indian importer making a claim for preferential tariff treatment, subject to sub-rule (8) and Annexure-E, there shall be an authentication process that is provided for in accordance with sub-rule (7).

(7) The Parties shall, on entry into force of the Agreement, agree and provide for the modalities of the authentication process referred to in sub-rule (6) which shall include ensuring that the necessary systems for enabling the electronic exchange of information are in place, following the framework in Annexure-D.

(8) Annexure-E shall apply to information processed by the Parties or shared between the Parties pursuant to the authentication process referred to in sub-rule (7) and Annexure- D. The Parties shall, if appropriate, mutually agree to modify Annexure-E.

18. Certificate of Origin.- (1) A certificate of origin shall be issued by an issuing authority.

(2) India shall exchange names of the issuing authorities and their specimen seals with His Majesty’s Revenue and Customs.

(3) India shall promptly inform His Majesty’s Revenue and Customs of any change in names of the issuing authorities and their specimen seals.

19. Exemptions from Proof of Origin Requirements.- (1) For the United Kingdom, by way of derogation from rule 16 and rule 17, provided that a good has been declared to customs as meeting the requirements of these rules and the customs authority of the United Kingdom has no reasonable doubts as to the veracity of that customs declaration, the United Kingdom shall grant preferential tariff treatment to that good if:

(a) the customs value of the importation does not exceed 1,000 pounds sterling or any higher amount as the United Kingdom may specify; or

(b) it is a good for which the United Kingdom has waived the requirements set out in rule 16 and rule 17.

(2) At the first meeting of the Working Group on Rules of Origin, the Parties may commence a review of this rule. The review shall consider the introduction of an exception to rule 16 and rule 17 for all low value goods.

(3) Sub-rule (1) does not apply if the importation forms part of a series of importations which the customs authority of the United Kingdom reasonably considers to have been carried out or planned for the purpose of evading compliance with its laws and regulations governing claims for preferential tariff treatment made under the Agreement.

(4) A Party shall provide that the importer shall be responsible for the correctness of the declaration referred to in sub-rule (1) of this rule and for compliance with the requirements of these rules.

20. Determinations of Claims for Preferential Tariff Treatment.- (1) Save as otherwise provided in sub-rule (2), each Party shall grant a claim for preferential tariff treatment made in accordance with these rules for a good that, on or after the date of entry into force of the Agreement, arrives in that Party or is released from customs control in that Party.

(2) The importing Party may deny a claim for preferential tariff treatment if:

(a) it determines that the good does not qualify as originating in accordance with the provisions of these rules or does not satisfy the requirements of these rules;

(b) pursuant to a verification under rule 26, it has not received sufficient information, including any information that may have been received or provided by the competent authority of the exporting Party, to determine:

(i) that the good qualifies as originating; or

(ii) that the importer, exporter, or producer has complied with the requirements of these rules;

(c) the exporter, producer, or importer fails to respond to a written request for information specified in rule 26; or

(d) the importer, exporter, or producer fails to comply with the relevant requirements for obtaining preferential tariff treatment.

(3) In case where the importing Party denies a claim for preferential tariff treatment, it shall issue a determination to the importer that includes the reasons for the determination. The customs authority of the importing Party may also share the determination and reasons for the determination with the customs authority of the exporting Party.

21. Refunds and Claims for Preferential Tariff Treatment After Importation.- (1)Each Party shall provide that:

(a) an importer may make a late claim for preferential tariff treatment; and

(b) subject to sub-rule (2), it shall refund any excess duties paid for a good, if the importer did not make a claim for preferential tariff treatment at the time of importation, provided that the good would have qualified for preferential tariff treatment at the time of importation.

(2) As a condition for a refund of excess duties under clause (b) of sub-rule (1), the importing Party shall require that the importer:

(a) makes a claim for preferential tariff treatment in accordance with rule 16; and

(b) provides such documentation relating to the importation of the good as the importing Party may require. This may include a copy of the origin declaration where a claim is based on an origin declaration.

(3) Each Party shall provide that a late claim for preferential tariff treatment may be made not later than one year after the date of importation or a longer period, if specified in the importing Party’s laws and regulations.

22. Incorrect Claims for Preferential Tariff Treatment.- (1) Each Party shall provide that, if the importer has reason to believe that the claim for preferential tariff treatment is based on incorrect information that could affect the accuracy or validity of the claim, the importer shall immediately correct the documentation relating to importation, notify the customs authority of the importing Party and pay any customs duty and, if applicable, penalties imposed.

(2) Each Party shall encourage its customs authority, when considering imposing penalty in relation to a claim for preferential tariff treatment, to consider as a significant mitigating factor, a notification given prior to the discovery of that error by the Party and, provided that in accordance with sub-rule (1), the importer rectifies the error and pays any duty.

23. Errors and Discrepancies.- (1) A Party shall not reject a proof of origin due to minor errors or discrepancies, omissions of information or typing errors or formatting errors, provided these minor errors or discrepancies do not create doubt as to the originating status of a good.

(2) Each Party shall provide that, if its customs authority determines that a proof of origin in respect of a good imported into that Party is illegible or defective on its face, the importer shall be granted a period of thirty days from the date of communication from the customs authority of the importing Party to provide a copy of the corrected proof of origin.

24. Penalties.- Each Party shall adopt or maintain measures imposing, where appropriate, criminal, civil, or administrative penalties for violations of its laws and regulations relating to these rules.

25. Record Keeping Requirements.- (1) Each Party shall provide that an importer claiming preferential tariff treatment is required to keep and provide to the customs authority of the importing Party upon request:--

(a) the documentation related to the importation, including any origin declaration or certificate of origin that served as the basis for the claim; and

(b) any records necessary to demonstrate the good satisfies the requirements for obtaining originating status for a period of at least four years from the date of importation of the good, or such longer period as required by the laws and regulations of the importing Party.

(2) Each Party shall provide that a producer or exporter is required to keep for a period of five years from the date of issuance of the certificate of origin or completion of the origin declaration, or such longer period as the exporting Party specifies, documentation related to the importation, including any origin declaration or certificate of origin and, where applicable, information from the supplier and all records thereof to prove origin.

Explanation: For India, this sub-rule shall also apply to the issuing authority.

(3) Each Party shall provide that an importer, exporter or producer in that Party may choose to maintain the records in sub-rules (1) and (2) in any medium that allows for prompt retrieval, including electronic, optical, magnetic or written form in accordance with that Party’s laws and regulations.

Explanation: For India, this sub-rule shall also apply to the issuing authority.

(4) For greater certainty, these obligations shall apply to the inventory management system of the producer.

26. Verification of Origin.- (1) For greater certainty, the verification of origin process specified herein shall be subsequent to the checking of authenticity of the proof of origin in accordance with rule 17. The mechanism based on Annexure-D may be amended by mutual agreement by the Subcommittee on Trade in Goods to be considered further by the Working Group on Rules of Origin.

(2) Where a claim for preferential tariff treatment is based on the importer’s knowledge pursuant to sub-rule (1) of rule 16, for the purpose of determining whether a good imported into the United Kingdom is originating, the customs authority of the United Kingdom may conduct a verification by a written request for information from the importer of the goods.

Explanation: For greater certainty, if a claim for preferential tariff treatment is based on the importer’s knowledge that the good is originating, the customs authority of the United Kingdom shall not request information from the competent authority of India to complete verification under these rules.

(3) Where a claim for preferential tariff treatment is based on an origin declaration or a certificate of origin, for the purpose of determining whether a good imported into the importing Party is originating, the customs authority of the importing Party may conduct a verification of the claim by requesting in writing, information from the importer of the good in accordance with the laws and regulations of the importing Party.

(4) Where the customs authority of the importing Party considers the information obtained under sub-rule (3) is not sufficient to make a determination of origin, the customs authority of the importing Party shall make a written request for information from the competent authority of the exporting Party. The customs authority of the importing Party shall seek information necessary to verify the origin of the good and pertaining to the fulfilment of the requirements of these rules. The request shall be made not later than two years after the date on which the claim for preferential tariff treatment was made.

(5) A request for assistance relating to the verification of origin in respect of a claim for preferential tariff treatment under the Agreement may be made after the two year time period specified in sub-rule (4) in accordance with the Agreement between the Government of the United Kingdom of Great Britain and Northern Ireland and the Government of the Republic of India on Cooperation and Mutual Administrative Assistance in Customs Matters signed in London on 31st May, 2021. Such requests may include a request for the information referred to in sub-rule (6). For greater certainty, rule 20 remains applicable pursuant to such a request. In the case of suspected fraud, collusion, wilful misstatement, and suppression of facts where such a request is made within a period of five years from the date on which the claim for preferential tariff treatment was made, the requested Party shall ensure that it responds to the request within twelve months. In exceptional cases, the Parties may by mutual agreement agree to extend this period for further six months.

Explanation: Requests for information from the United Kingdom shall be made to the Department of Commerce in India.

(6) A request made pursuant to sub-rule (4) may also include a request for the competent authority of the exporting Party to verify specific information held by the exporter, producer or supplier necessary to determine the origin of the good, such as:

(a) where the origin criterion is wholly obtained pursuant to clause (a) of subrule (1) of rule 3, the applicable category, such as harvesting, mining, fishing and the place of production;

(b) where the origin criterion is based on the good having been produced entirely pursuant to clause (b) of sub-rule (1) of rule 3, the information on the origin of the materials used, including information referred to in clauses

(d), (e) and (f) and the place of production;

(c) where the origin criterion is based on the good satisfying all applicable requirements of Annexure-A in accordance with clause (c) of sub-rule (1) of rule 3, the information on the origin of the materials, including information referred to in clauses (d), (e) and (f) and the place of production;

(d) where the origin criterion is based on a change in tariff classification, a list of all the non-originating materials used in the production of the good in a Party, including their tariff classification in two, four or six- digit format, depending on the relevant product-specific rule of origin;

(e) where the origin criterion is based on a value method, the value of the final good and the value of all the non-originating materials used in the production of that good if the build down method is used or the value of all originating materials used in the production if the build-up method is used as well as other relevant elements, including expenses, in accordance with rule 6;

(f) where the origin criterion is based on a specific production process, a description of that specific process;

(g) where the good has acquired originating status pursuant to sub-rule (1) of rule 7 or rule 9, information on the origin of the materials used and the final good, including information referred to in clauses (d), (e) and (f) and the place of production;

(h) information on any tolerances relied on under rule 10;

(i) information relating to compliance with the non-alteration provisions under rule 15;

(j) any other information including specific documentation or production process; or

(k) supporting documentation, where appropriate.

(7) The competent authority of the exporting Party shall provide the customs authority of the importing Party with a written acknowledgement of receipt of the request made pursuant to sub-rule (4) or sub-rule (6) within a period of thirty days after the date of the request.

(8) Following a request under sub-rule (4), the competent authority of the exporting Party may conduct a verification by one or more of the following activities:--

(a) requesting in writing, specific information and documentation from the exporter, producer or supplier referred to in sub-rule (6);

(b) requesting in writing, including by way of questionnaire, such information from the exporter, a producer or a supplier to ascertain the veracity of the information that formed the basis of the proof of origin; and

(c) visiting the premises of the exporter, producer, or supplier to review the records referred to in sub-rule (2) of rule 25, or to observe the facilities, processes, equipment or tools used in the production of the good, or to gather further evidence to verify the originating status of the goods.

(9) As soon as possible and in any event within seven months of receiving a request under sub-rule (4), the competent authority of the exporting Party shall provide the customs authority of the importing Party with a verification report. In exceptional cases, the Parties may agree, by mutual agreement, to extend this period by a further three months. The verification report shall include the following;--

(a) subject to sub-rule (10), any available information, including specific documentation, which the customs authority of the importing Party requested the competent authority of the exporting Party to verify, pursuant to sub-rule (6);

(b) a description of the good that is subject to examination, including its tariff classification in 2, 4 or 6-digit format, depending on the origin criterion;

(c) a description of the production process;

(d) information on the manner in which the verification of the good pursuant to

sub-rule (8) was conducted including the subject and scope of the verification; and

(e) supporting documentation, where appropriate.

(10) Notwithstanding sub-rule (9), the competent authority of the exporting Party shall not provide information to the customs authority of the importing Party if that information is deemed confidential by the exporter, producer or supplier. In such circumstances, the competent authority of the exporting Party shall confirm if it has reviewed the information the importing Party requested it to verify pursuant to sub-rules (4) and (6) and shall list the sources of information reviewed, stating whether the information supports the claim for preferential tariff treatment.

(11) If, upon receiving the verification report under sub-rule (9), the customs authority of the importing Party is unable to make a determination, it may request that the competent authority of the exporting Party verifies specific additional information, as mentioned in the request, relating to the origin of the good, which may include the information referred to in sub-rule (6), by way of a written request to the exporter, producer or supplier.

(12) In exceptional circumstances, if, following a request under sub-rule (11), the customs authority of the importing Party is unable to make a determination, it may request that the competent authority of the exporting Party conducts a visit to the exporter, producer or supplier. The customs authority of the importing Party shall only make a request where it reasonably considers the visit necessary to make a determination. The request for such a verification visit shall be made not later than thirty days of the receipt of the response from the competent authority of the exporting Party to a request made under sub-rule (11). The competent authority of the exporting Party shall respond to the request for a visit within forty-five days.

(13) Upon acceptance of a request for a visit under sub-rule (12), the competent authority of the exporting Party shall give a notice of at least twenty-one days to the competent authority of the importing Party to enable arrangements for the visit.

(14) Subject to any reasonable conditions specified by the competent authority of the exporting Party, such as health and safety requirements, the customs authority of the importing Party may designate upto two observers to be present during the verification visit conducted by the customs authority of the exporting Party under sub-rule (12), provided that,-

(a) any person designated as an observer is a government official of the importing Party; and

(b) any observer acts through the competent authority of the exporting Party and does not, on its own initiative, look for documents, conduct any searches or questions the exporter, producer or supplier directly.

(15) The competent authority of the exporting Party shall share the information on the visit including the manner in which the visit was conducted as well as the subject and scope of the verification within forty-five days of the conclusion of the visit.

(16) A verification under this rule may be conducted at any time after the claim for preferential tariff treatment is made.

(17) A request for verification under this rule shall be conducted on the basis of risk assessment methods, which may include random selection or on the basis of intelligence.

(18) During verification, the importing Party may allow the release of the good, subject to payment of any duties or provision of any security as provided for in its laws and regulations. In accordance with the laws and regulations of the importing Party, if, as a result of the verification, the importing Party determines that the good meets all the requirements of these rules, it shall grant preferential tariff treatment to the good and refund any excess duties paid or release any security provided, unless the security also covers other obligations.

(19) The customs authority of the importing Party shall reserve the right to issue the final determination of origin in accordance with rule 20, provided that the determination takes into account the information provided to it by the competent authority of the exporting Party as well as any independent findings or investigation.

(20) The customs authority of the importing Party shall:--

(a) make a determination following a verification as expeditiously as possible and not later than one year from the date it receives information which, in its opinion, is sufficient to enable it to make such a determination. If permitted by its laws and regulations, a Party may extend this period in exceptional cases, such as where the information concerned is complex. This time period will not apply to verifications pertaining to cases of suspected fraud, collusion, wilful misstatement, and suppression of facts referred to in subrule (5);

(b) provide the importer with a written determination of whether the good is originating that includes the reasons for the determination; and

(c) provide the competent authority of the exporting Party with a written determination of whether the good is originating including the reasons for that determination.

(21) The competent authorities of the Parties shall cooperate in the overall operation and administration of the verification process including establishing priorities, by mutual agreement, if there are a significant number of requests.

(22) The customs authorities of the Parties shall bear their own costs in carrying out the activities referred to in this rule.

27. Temporary Suspension of Preferential Tariff Treatment.-

(1) Subject to the
possibility of exemption under sub-rule (11), the importing Party may, in accordance with the procedure laid down in sub-rule (3), temporarily suspend preferential tariff treatment in respect of a good for which an exporter or producer has completed a proof of origin, if:

(a) a good has been subject to verification in accordance with rule 26 on at least two separate occasions and the second occasion is in respect of a proof of origin dated at least one month after the competent authority of the importing Party provides the determination to the competent authority of the exporting Party in respect of the first occasion; and

(b) each verification results in the denial of preferential tariff treatment in accordance with rule 20.

(2) Suspension of preferential tariff treatment under sub-rule (1) shall only apply to a good imported after the suspension is initiated, if that good is:

(a) classified under the same classification code as specified in the import declaration of the good that was subject to verification under sub-rule (1); and

(b) exported or produced by the exporter or producer who completed the proof of origin of the good that was subject to verification under sub-rule (1).

(3) If the importing Party intends to temporarily suspend preferential tariff treatment in accordance with sub-rule (1), it shall notify the competent authority of the exporting Party at least fifteen days prior to the commencement of any suspension, which shall include the following:

(a) the name of the exporter or producer and their reference number;

(b) the detailed reasons for the intention to suspend preferential tariff treatment;

(c) a detailed description of the good subject to suspension, including the corresponding commodity code as specified in the import declaration and the description of the good as specified in the proof of origin;

(d) the time period for which the temporary suspension is to be in effect;

(e) the information on the measures necessary for the restoration of preferential tariff treatment; and

(f) any other relevant information.

(4) Temporary suspension pursuant to sub-rule (1) shall apply only for the period necessary to counteract breaches or circumventions of these rules and to protect the financial interests of the importing Party. The competent authority of the importing Party shall restore preferential tariff treatment suspended in accordance with sub-rule (1), if the competent authority of the exporting Party provides evidence and the Parties agree that the conditions that gave rise to the suspension no longer exists. If the importing Party is not satisfied that the evidence provided by the competent authority of the exporting Party demonstrates that the conditions that gave rise to the suspension no longer exist, they shall provide their reasoning. Where the conditions that gave rise to the suspension exist at the expiry of the period of the temporary suspension, the importing Party may decide to renew the suspension. Any renewal of suspension shall be notified to the competent authority of the exporting Party.

(5) Subject to the possibility of exemption under sub-rule (11), the importing Party may temporarily suspend the relevant preferential tariff treatment for future imports of the same good classified under an identified classification code as specified in the import declaration in accordance with the procedure laid down in sub-rules (7) to (9) if:--

(a) the importing Party suspects, based on verifiable information that deliberate breaches of these rules have been committed in respect of that good;

(b) the good has been subject to verification in accordance with rule 26 for at least two different exporters or producers, each being subject to verification on at least two separate occasions, and the second occasion is in respect of a proof of origin dated at least one month after the competent authority of the importing Party provides the determination to the competent authority of the exporting Party in respect of the first occasion; and

(c) each verification results in the denial of preferential tariff treatment in accordance with rule 20.

(6) For the purposes of sub-rule (5), the exporters or producers subject to verification shall collectively account for the majority of the total exports of those goods from the exporting Party to the importing Party in the twelve months preceding the date of the first request for verification referred to in clause (b) of sub-rule (5).

(7) In case where the importing Party intends to temporarily suspend preferential tariff treatment in accordance with sub-rule (5), it shall notify the Working Group on Rules of Origin and, on the exporting Party’s request, shall enter into consultations with the exporting Party. The importing Party shall provide that the notification to the Working Group on Rules of Origin includes evidence that the requirements specified in sub-rules (5) and (6) have been met. The consultation shall aim to clarify the grounds for intention to suspend, be used to discuss any mitigating factors and explore possible solutions to avoid suspension. No suspension shall take place until the consultation process has concluded, unless the Parties agree otherwise.

(8) If the Parties fail to agree on a mutually acceptable solution or no consultations have been entered into within one month after the date of notification made in accordance with

sub-rule (7), or such other period as the Parties may mutually agree, the importing Party may temporarily suspend the relevant preferential tariff treatment. In that case, the importing Party shall notify the temporary suspension, including the period during which it intends the temporary suspension to apply, to the Working Group on Rules of Origin without delay.

(9) Temporary suspension pursuant to sub-rule (5) shall apply only for the period necessary to counteract breaches or circumventions of these rules and to protect the financial interests of the importing Party. The Parties shall keep any suspension under review through the Working Group on Rules of Origin and where it is agreed by the Parties that the suspension is no longer necessary, the importing Party shall bring it to an end. Where the conditions that gave rise to the suspension pursuant to sub-rule (5) persist at the expiry of the initial period of the temporary suspension, the importing Party may decide to renew the suspension. Any such renewal of suspension shall be notified to the exporting Party.

(10) Each Party shall publish, in accordance with its internal procedures, notices to importers about any decision concerning temporary suspension referred to in sub-rule (5).

(11) Notwithstanding anything contained in sub-rules (1) and (5), if an exporter or producer is able to satisfy the exporting Party that such goods are fully compliant with the requirements of these rules and the importing Party agrees, the importing Party shall exempt those goods from the suspension.

Explanation: For greater certainty, a good subject to verification which has been released subject to the payment of any duties or provision of any security in accordance with subrule (18) of rule 26 shall not constitute temporary suspension of preferential tariff treatment under this rule.

28. Confidentiality.- (1) These rules shall not require a Party to furnish or allow access to information where the use or disclosure of that information would impede law enforcement or would be contrary to that Party’s law.

(2) Each Party shall maintain, in conformity with its law, the confidentiality of any information collected pursuant to these rules and shall protect that information from disclosure that could prejudice the competitive position of the person to whom the information relates.

(3) Each Party shall ensure that confidential information collected pursuant to these rules shall not be used or disclosed for purposes other than the administration and enforcement of determination of origin or of customs matters, except with the permission of the person or Party who provided the confidential information.

(4) Notwithstanding anything contained in sub-rules (2) and (3), if the Party receiving or obtaining the information is required by its law to disclose the information for purposes other than the administration and enforcement of determination of origin or of customs matters, that Party shall, where possible, notify the person or Party who provided the information of such use. That notification shall, where possible, be given in advance of such use.

(5) Notwithstanding anything contained in sub-rule (3), a Party may allow information collected pursuant to these rules to be used in any administrative, judicial, or quasi-judicial proceedings instituted for failure to comply with customs-related laws and regulations implementing these rules. A Party shall, where possible, notify the person or Party who provided the information of such use. That notification shall, where possible, be given in advance of such use.

(6) The Parties shall, if one of them so requests, exchange information on their respective law for the purpose of facilitating the operation and application of this rule.

29. Working Group on Rules of Origin.- (1) The Parties hereby establish a Working Group on Rules of Origin consisting of government representatives of each Party responsible for rules of origin matters to consider any matters arising under these rules.

(2) The functions of the Working Group on Rules of Origin shall include:--

(a) cooperating in the administration and interpretation of these rules;

(b) exchanging information on matters related to these rules;

(c) communicating and updating the necessary contact details of the Working Group members for the purposes of these rules;

(d) considering any matter referred to it by the Subcommittee on Trade in Goods or the Joint Committee; and

(e) any other matter as the Working Group mutually agrees.

(3) The Working Group on Rules of Origin shall meet within twelve months of the date of entry into force of the Agreement and thereafter at least once annually.

(4) The Working Group on Rules of Origin shall report to the Subcommittee on Trade in Goods.

Annexure-A
[See rule 3]

(Product Specific Rules of Origin)

Headnotes to the Annexure

1. For the purposes of this Annexure:

(a) “section” means a section of the Harmonized System;

(b) “chapter” means the first two digits of the tariff classification number under the Harmonized System;

(c) “heading” means the first four digits of the tariff classification number under the Harmonized System; and

(d) “sub-heading” means the first six digits of the tariff classification number under the Harmonized System.

2. The product specific rule, or set of product specific rules, that apply to a particular chapter, heading or sub-heading are described in this Annexure at Column 3. Where, in some cases, a chapter or heading is preceded by “ex”, this signifies that the product specific rule applies only to part of that chapter or heading. Where a sub-heading is preceded by “ex”, this signifies that the product specific rule applies only to part of that sub-heading, as per the description at Column 2.

3. Section notes, where applicable, are found at the beginning of each section, and are read in conjunction with the product specific rules of origin and may impose further conditions on, or provide an alternative, product specific rule of origin.

4. A requirement of a change in tariff classification applies only to non-originating materials.

5. If a chapter, heading or sub-heading is excluded as part of a change in tariff classification rule, it means that non-originating materials of that chapter, heading or subheading may not be used to meet the change in tariff classification rule.

6. Note 5 does not apply where non-originating materials do not exceed either the relevant value or weight percentage as specified for that chapter as set out in rule 10.

7. Where a chapter, heading or sub-heading is subject to alternative product specific rules, the requirements of this Annexure will be considered to be satisfied if a good satisfies one of the alternative rules.

8. If a good is subject to a product specific rule that includes multiple requirements, the requirements of this Annexure will be considered to be satisfied for that good only if the good satisfies all applicable requirements.

9. For the purposes of “LIST” of this Annexure:

(a) “WO” means wholly obtained as established in rule 4;

(b) “CC” means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the two-digit level;

(c) “CTH” means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the four- digit level;

(d) “CTSH” means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the six-digit level;

(e) “QVC” means that the good must have a qualifying value content as calculated under rule 6 of not less than the percentage specified in Column 3, whether using the build-up method or build-down method;

(f) “Standard QVC” means that the good must have a qualifying value content as calculated under rule 6 of not less than:

(i) 40 percent of the ex-works price under the build-down method;

(ii) 45 percent of the free-on-board value under the build-down method; or

(iii) 35 percent of either the ex-works price or free-on-board value under the build-up method;

(g) “build-down method” means the good has a qualifying value content calculated using the build-down method under rule 6;

(h) “build-up method” means the good has a qualifying value content calculated using the build-up method under rule 6;

(i) “ex-works price” means the good is valued in accordance with rule 5;

(j) “free-on-board value” means the good is valued in accordance with rule 5; and

(k) “Melt and Pour” means the process undertaken in one or both of the Parties where the iron or steel is: (i) first produced in an iron or steelmaking furnace in a liquid state; and then (ii) poured into its first solid shape.

10. This Annexure is based on the 2022 Edition of the Harmonized System, which entered into force on the 1st January 2022.

LIST

Product Specific Rules of Origin
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Chapter 1 Live animals WO
Chapter 2 Meat and edible meat offal WO
Chapter 3 Fish and crustaceans, molluscs
and other aquatic invertebrates
WO
Chapter 4 Dairy produce; birds’ eggs;

natural honey; edible products of
animal origin, not elsewhere
specified or included
WO
Chapter 5 Products of animal origin ; not
elsewhere specified or included
WO

SECTION II

VEGETABLE

PRODUCTS

Section Note: An agricultural or horticultural good grown in the territory of a Party is originating even if grown from seed, bulbs, rhizomes, rootstock, cuttings, slips, grafts, shoots, buds, or other live parts of plants that are imported from a non-Party. Chapter 6 Live trees and other plants;

bulbs, roots and the like; cut
flowers and ornamental foliage
WO
Chapter 7 Edible vegetables and certain
roots and tubers
WO
Ex Chapter 8 Edible fruit and nuts; peel of
citrus fruit or melons
WO
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

0812 Fruit and nuts provisionally
preserved, but unsuitable in that
state for immediate consumption
CTH
0813 Fruit, dried, other than that of
headings 0801 to 0806; mixtures
of nuts or dried fruits of chapter
CTH
Ex Chapter 9 Coffee, tea, maté and spices WO
090112 Coffee, not roasted:

decaffeinated

CTSH

090121 Coffee roasted: not decaffeinated CTSH
090122 Coffee roasted: decaffeinated CTSH
090190 Coffee; coffee husks and skins;

coffee substitutes containing
coffee in any proportion

CTSH

090210 Green tea (not fermented) in
immediate packings of a content
not exceeding 3kg
CTSH; or
blending
090220 Green tea (not fermented) in
immediate packings of a content
exceeding 3kg
CC; or
blending
090230 Black tea (fermented) and partly
fermented tea, in immediate
packings of a content not
exceeding 3kg
CTSH; or
blending
090240 Black tea (fermented) and partly
fermented tea, in immediate
packings of a content exceeding
3kg
CC; or
blending
Chapter 10 Cereals WO
Ex Chapter 11 Products of the milling industry;

malt; starches; inulin; wheat
gluten
WO
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

1101 Wheat or meslin flour CC
1102 Cereal flours other than of wheat
or meslin
CC
110319 Groats and meal: of other cereals CC
Ex 110320 Pellets of oats CC
110412 Rolled or flaked cereal grains: of
oats
CC
110422 Other worked grains (e.g. hulled,

pearled, sliced or kibbled): of
oats
CC
1107 Malt, whether or not roasted CC
Chapter 12 Oil seeds and oleaginous fruits;

miscellaneous grains, seeds and
fruit; industrial or medicinal
plants; straw and fodder
WO
Chapter 13 Lac; gums, resins and other
vegetable saps and extracts
CC
Chapter 14 Vegetable plaiting materials;

vegetable products not elsewhere
specified or included
WO
Ex Chapter 15 Animal, vegetable or microbial
fats and oils and their cleavage
products; prepared edible fats;

animal or vegetable waxes
CTH and Standard QVC
1505 Wool grease and fatty substances
derived therefrom (including
lanolin)

CC
151211 Sunflower-seed or safflower oil
and fractions thereof: crude oil
CC
151219 Sunflower-seed or safflower oil
and fractions thereof: other
CC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

151221 Cotton-seed oil and its fractions:

crude oil, whether or not
gossypol has been removed
CC
151229 Cotton-seed oil and its fractions:

other
CC
151411 Low erucic acid rape or colza oil
and its fractions: crude oil
CC
151419 Low erucic acid rape or colza oil
and its fractions: other than
crude oil

CTSH

151491 Crude rape, colza or mustard oil
and fractions thereof, not
chemically modified: other than
low erucic acid rape or colza oil
and its fractions
CC
151499 Other rape, colza or mustard oil
and fractions thereof, not
chemically modified: other than
low erucic acid rape or colza oil
and its fractions

CTSH

1515 Other fixed vegetable or
microbial fats and oils (including
jojoba oil) and their fractions,

whether or not refined, but not
chemically modified
CC
1516 Animal, vegetable or microbial
fats and oils and their fractions,

partly or wholly hydrogenated,

inter-esterified, re-esterified or
elaidinised, whether or not
refined, but not further prepared
CC
1518 Animal, vegetable or microbial
fats and oils and their fractions,

boiled, oxidised, dehydrated
sulphurised, blown, polymerised
by heat in vacuum or in inert gas
or otherwise chemically
CC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

modified, excluding those of
heading 1516; inedible mixtures
or preparations of animal,

vegetable or microbial fats or
oils or of fractions of different
fats or oils of chapter 15, not
elsewhere specified or included
1520 Glycerol, crude; glycerol waters
and glycerol lyes
CC
1521 Vegetable waxes (other than
triglycerides), beeswax, other
insect waxes and spermaceti,

whether or not refined or
coloured
CTH
Chapter 16 Preparations of meat, of fish, of
crustaceans, molluscs or other
aquatic invertebrates, or of
insects;

CC
Ex Chapter 17 Sugars and sugar confectionary CC
1702 Other sugars, including
chemically pure lactose, maltose,

glucose or fructose, in solid
form: sugar syrups not
containing added flavouring or
colouring matter; artificial
honey, whether or not mixed
with natural honey; caramel
CTH
1704 Sugar confectionery (including
white chocolate), not containing
cocoa
CTH
Ex Chapter 18 Cocoa and cocoa preparations WO
Ex 1806 Chocolate and other food
preparations containing cocoa
CTH, excluding nonoriginating materials from
heading 1805
180690 Other chocolate and other food
preparations containing cocoa
CTH
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Ex Chapter 19 Preparations of cereal, flour,

starch or milk; pastrycooks’
products
CC, in which the nonoriginating materials of
chapters 10 and 11 do not
exceed 30 percent of the
value or net-weight of the
good. Rule 10(Tolerance)

does not apply to nonoriginating materials of
chapters 10 and 11.

1901 Malt extract; food preparations
of flour, groats, meal, starch,

malt extract, not containing
cocoa or containing less than
40% by weight of cocoa
calculated on a totally defatted
basis, not elsewhere specified or
included; food preparations of
goods of headings 0401 to 0404,

not containing cocoa or
containing less than 5% by
weight of cocoa calculated on a
totally defatted basis, not
elsewhere specified or included
CC
1904 Prepared foods obtained by the
swelling or roasting of cereals or
cereal products (e.g. corn
flakes); cereals (other than maize
(corn)) in grain form or in the
form of flakes or other worked
grains (except flour, groats and
meal), pre-cooked, or otherwise
prepared, not elsewhere
specified or included
CC, in which the nonoriginating materials of
chapters 10 and 11 do not
exceed 60 percent of the
value or net-weight of the
good. Rule 10(Tolerance)

does not apply to nonoriginating materials of
chapters 10 and 11.

1905 Bread, pastry, cakes, biscuits,

and other bakers’ wares, whether
or not containing cocoa;

communion wafers, empty
cachets of a kind suitable for
pharmaceutical use, sealing
wafers, rice paper and similar
products
CTH
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Chapter 20 Preparations of vegetables, fruit,

nuts or other parts of plants
CTH and Standard QVC
Ex Chapter 21 Miscellaneous edible
preparations
CC, excluding nonoriginating materials from
chapter 4
210310 Soya sauce CTH
210320 Tomato ketchup and other
tomato sauces

CTSH

210330 Mustard flour and meal and
prepared mustard
CTH
210390 Other sauces and preparations
therefor; mixed condiments and
mixed seasonings

CTSH

2104 Soups and broths and
preparations therefor;

homogenised composite food
preparations

CTSH

2105 Ice cream and other edible ice;

whether or not containing cocoa
CTH
2106 Food preparations not elsewhere
specified or included
CTH
Ex Chapter 22 Beverages, spirits and vinegar CC
2203 Beer made from malt CC, excluding nonoriginating materials from
heading 1901
2204 Wine of fresh grapes, including
fortified wines; grape must other
than that of heading 2009
CC, excluding nonoriginating materials from
heading 2009
2205 Vermouth and other wine of
fresh grapes, flavoured with
plants or aromatic substances
CC, excluding nonoriginating materials from
heading 2009
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

2206 Other fermented beverages (e.g.

cider, perry, mead, saké);

mixtures of fermented beverages
and mixtures of fermented
beverages and non-alcoholic
beverages, not elsewhere
specified or included
CC, excluding nonoriginating materials from
heading 0409
Ex 2208 Undenatured ethyl alcohol of an
alcoholic strength by volume of
less than 80% volume; spirits,

liqueurs and other spirituous
beverages
CTH and Standard QVC
220830 Whiskies CTH
Ex 220850 Gin, in containers holding 2
litres or less
CTH
Ex Chapter 23 Residues and wastes from the
food industries; prepared animal
fodder
CC
2305 Oil-cake and other solid
residues, whether or not ground
or in the form of pellets,

resulting from the extraction of
ground-nut oil
CTH and Standard QVC
2306 Oil-cake and other solid
residues, whether or not ground
or in the form of pellets,

resulting from the extraction of
vegetable or microbial fats or
oils, other than those of heading
2304 or 2305
CTH and Standard QVC
2307 Wine lees; argol CTH and Standard QVC
2308 Vegetable materials and
vegetable waste, vegetable
residues and bi-products,

whether or not in the form of
pellets, of a kind used in animal
CTH and Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

feeding, not elsewhere specified
or included
2309 Preparations of a kind used in
animal feeding
CTH
Ex Chapter 24 Tobacco and manufactured
tobacco substitutes; products,

whether or not containing
nicotine, intended for inhalation
without combustion; other
nicotine containing products
intended for the intake of
nicotine into the human body
CTH
2401 Unmanufactured tobacco;

tobacco refuse
WO
Chapter 25 Salt; sulphur; earths and stone;

plastering materials, lime and
cement
CTSH and Standard QVC
Chapter 26 Ores, slag and ash CTSH and Standard QVC Chapter 27 Mineral fuels, mineral oils and
products of their distillation;

bituminous substances; mineral
waxes

CTSH

SECTION VI

PRODUCTS OF

THE CHEMICAL

OR ALLIED

INDUSTRIES

Section Note 1: Chemical Reaction Rule
Notwithstanding the applicable product specific rules of origin, a good of chapter 28 through 38 that is the product of a chemical reaction satisfies the requirements of this Annexure if the chemical reaction occurs in the territory of one or both of the Parties. For the purposes of this rule: “chemical reaction” means a process (including a biochemical process) which results in a molecule with a new structure by breaking intramolecular bonds and by forming new intramolecular bonds, or by altering the spatial arrangement of atoms in a molecule. The following are not chemical reactions:

(a) dissolving in water or other solvents;

(b) the elimination of solvents including solvent water; or

(c) the addition or elimination of water of crystallisation.

Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Section Note 2: Mixing and Blending Rule
Notwithstanding the applicable product specific rules of origin, a good of chapter 33, satisfies the requirements of this

Annexure if mixing and blending occurred in the territory of one or both of the Parties. For the purposes of this rule:

“mixing and blending” means the deliberate and
proportionally controlled mixing or blending (including dispersing) of materials other than the addition of diluents, to conform to predetermined specifications which results in the production of a good having physical or chemical
characteristics which are relevant to the purposes or uses of the good and are different from the input materials.

Chapter 28 Inorganic chemicals; organic or
inorganic compounds of precious
metals, of rare-earth metals, of
radioactive elements or of
isotopes
CTSH; or
Standard QVC; or
chemical reaction
Chapter 29 Organic chemicals CTSH; or
Standard QVC; or
chemical reaction
Chapter 30 Pharmaceutical products CTSH; or
Standard QVC; or
chemical reaction
Ex Chapter 31 Fertilisers CTSH; or
chemical reaction
3105 Mineral or chemical fertilizers
containing 2 or 3 of the
fertilising elements nitrogen,

phosphorus, potassium; other
fertilisers; goods of chapter 31 in
tablets or similar forms or in
packages of a gross weight not
exceeding 10 kg
CTH; or
chemical reaction
Chapter 32 Tanning or dyeing extracts;

tannins and their derivatives;

dyes, pigments and other
colouring matter; paints,

CTSH; or
Standard QVC; or
chemical reaction
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

varnishes; putty, other mastics;

inks
Chapter 33 Essential oils and resinoids;

perfumery, cosmetic or toilet
preparations
CTH; or
chemical reaction; or
mixing and blending
Chapter 34 Soap, organic surface-active
agents, washing preparations,

lubricating preparations,

artificial waxes, prepared waxes,

polishing or scouring
preparations, candles and similar
articles, modelling pastes,

“dental waxes” and dental
preparations with a basis of
plaster
CTH; or
chemical reaction
Chapter 35 Albuminoidal substances;

modified starches; glues;

enzymes
CTSH; or
chemical reaction
Chapter 36 Explosives; pyrotechnic
products; matches; pyrophoric
alloys; certain combustible
preparations
CTH; or
chemical reaction
Chapter 37 Photographic or cinematographic
goods
CTH excluding nonoriginating materials from
headings 3701, 3702 and
3703; or
chemical reaction
Chapter 38 Miscellaneous chemical products CTSH; or chemical reaction

SECTION VII

PLASTICS AND

ARTICLES

THEREOF;

RUBBER AND

ARTICLES

THEREOF

Section Note 1: Chemical Reaction Rule
Notwithstanding the applicable product specific rules of origin, a good of chapter 39 that is the product of a chemical reaction satisfies the requirements of this Annexure if the chemical reaction occurs in the territory of one or both of the Parties. For the purposes of this rule: “chemical reaction” means a process (including a biochemical process) which results in a molecule with a new structure by breaking intramolecular bonds and by
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

forming new intramolecular bonds, or by altering the spatial arrangement of atoms in a molecule. The following are not chemical reactions:

(a) dissolving in water or other solvents;

(b) the elimination of solvents including solvent water; or

(c) the addition or elimination of water of crystallisation.

Ex Chapter 39 Plastics and articles thereof CTSH; or chemical reaction
3915 Waste, parings and scrap, of
plastics
WO
Ex Chapter 40 Rubber and articles thereof CTH; or
Standard QVC
4001 Natural rubber, balata, guttapercha, guayule, chicle and
similar natural gums; in primary
forms or in plates, sheets or strip
WO
4012 Retreaded or used pneumatic
tyres of rubber; solid or cushion
tyres, tyre treads and tyre flaps,

of rubber
CTSH and Standard QVC
4014 Hygienic or pharmaceutical
articles (including teats), of
vulcanised rubber other than
hard rubber, with or without
fittings of hard rubber
CTSH and Standard QVC
4015 Articles of apparel and clothing
accessories (including gloves,

mittens and mitts), for all
purposes, of vulcanised rubber
other than hard rubber
CTSH and Standard QVC
Chapter 41 Raw hides and skins (other than
furskins) and leather
CTSH and Standard QVC
Chapter 42 Articles of leather; saddlery and
harness; travel goods, handbags
and similar containers; articles of
CTH and Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

animal gut (other than silk-worm
gut)

Chapter 43 Furskins and artificial fur;

manufactures thereof
CTH and Standard QVC
Chapter 44 Wood and articles of wood;

wood charcoal
CTSH and Standard QVC
Chapter 45 Cork and articles of cork CTH and Standard QVC Chapter 46 Manufactures of straw, of
esparto or of other plaiting
materials; basketware and
wickerwork
CTSH and Standard QVC
Chapter 47 Pulp of wood or of other fibrous
cellulosic material; recovered
(waste and scrap) paper or
paperboard
CTSH and Standard QVC
Chapter 48 Paper and paperboard; articles of
paper pulp, of paper or of
paperboard
CTSH and Standard QVC
Chapter 49 Printed books, newspapers,

pictures and other products of
the printing industry;

manuscripts, typescripts and
plans
CTSH and Standard QVC
Chapter 50 Silk CTH and Standard QVC
Chapter 51 Wool, fine or coarse animal hair;

horsehair yarn and woven fabric
CTH and Standard QVC
Chapter 52 Cotton CTH and Standard QVC
Chapter 53 Other vegetable textile fibres;

paper yarn and woven fabrics of
paper yarn
CTH and Standard QVC
Chapter 54 Man-made filaments; strip and
the like of man- made textile
materials
CTH and Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Chapter 55 Man-made staple fibres CTH and Standard QVC Chapter 56 Wadding, felt and nonwovens;

special yarns; twine, cordage,

ropes and cables and articles
thereof
CTH and Standard QVC
Chapter 57 Carpets and other textile floor
coverings
CTH and Standard QVC
Chapter 58 Special woven fabrics, tufted
textile fabrics, lace, tapestries,

trimmings, embroidery
CTH and Standard QVC
Chapter 59 Impregnated, coated, covered or
laminated textile fabrics; textile
articles of a kind suitable for
industrial use
CTH and Standard QVC
Chapter 60 Knitted or crocheted fabrics CTH and Standard QVC Chapter 61 Articles of apparel and clothing
accessories; knitted or crocheted
CTH and Standard QVC
Chapter 62 Articles of apparel and clothing
accessories; not knitted or
crocheted
CTH and Standard QVC
Chapter 63 Other made up textile articles;

sets; worn clothing and worn
textile articles; rags
CTH and Standard QVC
Chapter 64 Footwear, gaiters and the like;

parts of such articles
CTH
Chapter 65 Headgear and parts thereof CTH and Standard QVC Chapter 66 Umbrellas, sun umbrellas,

walking-sticks, seat-sticks,

whips, riding-crops and parts
thereof
CTSH and Standard QVC
Chapter 67 Prepared feathers and down and
articles made of feather or of
CTSH and Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

down; artificial flowers; articles
of human hair
Chapter 68 Articles of stone, plaster,

cement, asbestos, mica or similar
materials
CTSH and Standard QVC
Chapter 69 Ceramic products CC
Chapter 70 Glass and glassware CTH
Ex Chapter 71 Natural, cultured pearls;

precious, semi-precious stones,

precious metals, metals clad with
precious metal, and articles
thereof; imitation jewellery; coin
CTSH and Standard QVC
7102 Diamonds, whether or not
worked, but not mounted or set
CTSH and a QVC of not
less than 6%
7103 Precious stones (other than
diamonds) and semi-precious
stones, whether or not worked or
graded but not strung, mounted
or set; ungraded precious stones
(other than diamonds) and semiprecious stones, temporarily
strung for convenience of
transport
CTSH and a QVC of not
less than 20%
7106 Silver (including silver plated
with gold or platinum);

unwrought or in semimanufactured forms, or in
powder form
CTSH and a QVC of not
less than 25%
7110 Platinum; unwrought or in semimanufactured forms, or in
powder form
CC
Ex 711311 Silver jewellery: Plain CTSH and a QVC of not less than 3.5%
Ex 711311 Silver jewellery: Studded with
Gemstones
CTSH and a QVC of not
less than 6%

Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Ex 711311 Silver jewellery: Studded with
Diamonds
CTSH and a QVC of not
less than 7%
Ex 711311 Parts CTSH and a QVC of not
less than 3.5%
Ex 711319 Gold jewellery: Plain CTSH and a QVC of not less than 3.5%
Ex 711319 Gold jewellery: Studded with
Gemstones
CTSH and a QVC of not
less than 6%
Ex 711319 Gold jewellery: Studded with
Diamonds
CTSH and a QVC of not
less than 7%
Ex 711319 Gold jewellery: Studded with
Pearls
CTSH and a QVC of not
less than 6%
Ex 711319 Parts CTSH and a QVC of not
less than 3.5%
711320 Jewellery: of base metal clad
with precious metal, and parts
thereof
CTSH and a QVC of not
less than 3.5%
7114 Articles of goldsmiths’ or
silversmiths’ wares and parts
thereof, of precious metal or of
metal clad with precious metal
CTSH and a QVC of not
less than 3.5%
7117 Imitation jewellery CTSH and a QVC of not
less than:

(a) 35% of the exworks price under
the build-down
method; or

(b) 40% of the free-onboard value under
the build-down
method; or

(c) 30% of either the
ex-works price or
free-on-board
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

value under the
build-up method
7118 Coin CTH and a QVC of not
less than 1.5%
Ex Chapter 72 Iron and steel Melt and Pour in the
Parties
7201 Pig iron and spiegeleisen in pigs,

blocks or other primary forms
CTH and a QVC of not
less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free-onboard value under
the build-down
method; or

(c) 45% of either the
ex-works price or
free-on-board
value under the
build-up method
7202 Ferro-alloys
7203 Ferrous products obtained by
direct reduction of iron ore and
other spongy ferrous products, in
lumps, pellets or the similar
forms; iron having a minimum
purity of 99.94%, in lumps,

pellets or similar forms
7204 Ferrous waste and scrap;

remelting scrap ingots of iron or
steel
7205 Granules and powders, of pig
iron, spiegeleisen, iron or steel
Chapter 73 Articles of iron or steel CTH and a QVC of not less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free-onboard value under
the build-down
method; or

(c) 45% of either the
ex-works price or
free-on-board
value under the
build-up method
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Chapter 74 Copper and articles thereof CTSH and Standard QVC Chapter 75 Nickel and articles thereof CTSH and Standard QVC Ex Chapter 76 Aluminium and articles thereof CTSH and Standard QVC 7601 Unwrought Aluminium Standard QVC; or
thermal or electrolytic
treatment from unalloyed
aluminium or waste and
scrap of aluminium
7602 Aluminium waste and scrap CTH; or
Standard QVC
7603 Aluminium powders and flakes CTH; or
Standard QVC
7604 Aluminium bars, rods and
profiles
CTH; or
Standard QVC
7605 Aluminium wire CTH; or
Standard QVC
7606 Aluminium plates, sheets and
strip, of a thickness exceeding

0.2 mm
CTH; or
Standard QVC
Chapter 78 Lead and articles thereof CTSH and Standard QVC Chapter 79 Zinc and articles thereof CTSH and Standard QVC Chapter 80 Tin and articles thereof CTSH and Standard QVC Chapter 81 Other base metals; cermets and
articles thereof
CTSH and Standard QVC
Chapter 82 Tools, implements, cutlery,

spoons and forks, of base metal;

parts thereof of base metal
CTSH and Standard QVC
Chapter 83 Miscellaneous articles of base
metal
CTSH and Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Ex Chapter 84 Nuclear reactors, boilers,

machinery and mechanical
appliances; parts thereof
CTSH and Standard QVC
Ex 8401 Nuclear reactors; fuel elements
(cartridges), non-irradiated, for
nuclear reactors, machinery and
apparatus for isotopic separation
CTSH; or
Standard QVC
840140 Parts of nuclear reactors CTH; or
Standard QVC
8407 Spark-ignition reciprocating or
rotary internal combustion piston
engines
CTH; or
No change in tariff
classification required,

provided there is a QVC of
not less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free-onboard value under
the build-down
method; or

(c) 45% of either the
ex-works price or
free-on-board
value under the
build-up method
8408 Compression-ignition internal
combustion piston engines
(diesel or semi-diesel engines)

8409 Parts suitable for use solely or
principally with the engines of
heading 8407 or 8408
Ex 8411 Turbo-jets, turbo-propellers and
other gas turbines
CTSH; or
Standard QVC
841191 Parts of turbo-jets and turbopropellers
CTH; or
Standard QVC
841199 Parts of other gas turbines CTH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Ex 8413 Pumps for liquids, whether or
not fitted with measuring device;

liquid elevators
CTSH; or
Standard QVC
841391 Parts of pumps CTH; or
Standard QVC
841392 Parts of liquid elevators CTH; or
Standard QVC
Ex 8414 Air or vacuum pumps, air or
other gas compressors and fans;

ventilating or recycling hoods
incorporating a fan, whether or
not fitted with filters; gas-tight
biological safety cabinets,

whether or not fitted with filters
CTSH; or
Standard QVC
841490 Parts of air or vacuum pumps, air
or other gas compressors and
fans; ventilating or recycling
hoods incorporating a fan,

whether or not fitted with filters;

gas-tight biological safety
cabinets, whether or not fitted
with filters
CTH; or
Standard QVC
Ex 8415 Air conditioning machines;

comprising a motor-driven fan
and elements for changing the
temperature and humidity,

including those machines in
which the humidity cannot be
separately regulated
CTSH; or
Standard QVC
841590 Parts of air conditioning
machines; comprising a motordriven fan and elements for
changing the temperature and
humidity, including those
machines in which the humidity
cannot be separately regulated
CTH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Ex 8419 Machinery, plant or laboratory
equipment, whether or not
electrically heated, (excluding
furnaces, ovens and other
equipment of heading 8514) for
the treatment of materials by a
process involving change of
temperature such as heating,

cooking, roasting, distilling,

rectifying, sterilising,

pasteurising, steaming, drying,

evaporating, vaporising,

condensing or cooling, other
than machinery or plant of a kind
used for domestic purposes;

instantaneous or storage water
heaters, non-electric
CTSH; or
Standard QVC
841990 Parts of machinery, plant or
laboratory equipment, whether
or not electrically heated
(excluding furnaces, ovens and
other equipment of heading
8514), for the treatment of
materials by a process involving
a change of temperature such as
heating, cooking, roasting,

distilling, rectifying, sterilising,

pasteurising, steaming, drying,

evaporating, vaporising,

condensing or cooling, other
than machinery or plant of a kind
used for domestic purposes;

instantaneous or storage water
heaters, non-electric.

CTH; or
Standard QVC
Ex 8421 Centrifuges, including
centrifugal dryers; filtering or
purifying machinery and
apparatus, for liquids or gases
CTSH; or
Standard QVC
842191 Parts of centrifuges, including
centrifugal dryers
CTH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

842199 Parts of filtering or purifying
machinery and apparatus, for
liquids or gases
CTH; or
Standard QVC
8430 Other moving, grading,

levelling, scraping, excavating,

tamping, compacting, extracting
or boring machinery, for earth,

minerals, or ores; pile-drivers
and pile-extractors; snowploughs and snow-blowers
CTH; or
Standard QVC
8431 Parts suitable for use solely or
principally with the machinery
of heading 8425 to 8430
CTH; or
Standard QVC
Ex 8443 Printing machinery used for
printing by means of plates,

cylinders and other printing
components of heading 8442;

other printers, copying machines
and facsimile machines, whether
or not combined
CTSH; or
Standard QVC
844391 Parts and accessories of printing
machinery used for printing by
means of plates, cylinders and
other printing components of
heading 8442
CTH; or
Standard QVC
844399 Parts and accessories of other
printers, copying machines and
facsimile machines, whether or
not combined; parts and
accessories thereof
CTH; or
Standard QVC
8460 Machine-tools for deburring,

sharpening, grinding, honing,

lapping, polishing or otherwise
finishing metal or cermets by
means of grinding stones,

abrasives or polishing products,

other than gear cutting, gear
CTH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

grinding or gear finishing
machines of heading 8461
8462 Machine-tools (including
presses) for working metal by
forging, hammering or die
forging (excluding rolling mills);

machine-tools (including
presses, slitting lines and cut-tolength lines) for working metal
by bending, folding,

straightening, flattening,

shearing, punching, notching or
nibbling (excluding drawbenches); presses for working
metal or metal carbides, not
specified above
CTH; or
Standard QVC
Ex 8479 Machines and mechanical
appliances having individual
functions, not specified or
included elsewhere in chapter 84
CTSH; or
Standard QVC
847990 Parts of machine and mechanical
appliances; having individual
functions, not specified or
included elsewhere in chapter 84
CTH; or
Standard QVC
Ex 8481 Taps, cocks, valves and similar
appliances for pipes, boiler
shells, tanks, vats or the like,

including pressure-reducing
valves and thermostatically
controlled valves
CTSH; or
Standard QVC
848190 Parts of taps, cocks, valves and
similar appliances for pipes,

boiler shells, tanks, vats or the
like, including pressure-reducing
valves and thermostatically
controlled valves
CTH; or
Standard QVC
8483 Transmission shafts (including
cam shafts and crank shafts) and
cranks; bearing housings and
plain shaft bearings; gears and
CTH; or
No change in tariff
classification required,

Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

gearing; ball or roller screws;

gear boxes and other speed
changers, including torque
converters; flywheels and
pulleys, including pulley blocks;

clutches and shaft couplings
(including universal joints)

provided there is a QVC of
not less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free-onboard value under
the build-down
method; or

(c) 45% of either the
ex-works price or
free-on-board
value under the
build-up method
Ex Chapter 85 Electrical machinery and
equipment and parts thereof;

sound recorders and reproducers,

television image and sound
recorders and reproducers, and
parts and accessories of such
articles
CTSH and Standard QVC
8501 Electric motors and generators
(excluding generating sets)

CTH; or
Standard QVC
8502 Electric generating sets and
rotary converters
CTH; or
Standard QVC
8503 Parts suitable for use solely or
principally with the machines of
heading 8501 or 8502
CTH; or
Standard QVC
Ex 8504 Electric transformers, static
converters (e.g. rectifiers) and
inductors
CTSH; or
Standard QVC
850490 Parts of electric transformers,

static converters (e.g. rectifiers)

and inductors
CTH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

Ex 8506 Primary cells and primary
batteries
CTSH; or
Standard QVC
850690 Parts of primary cells and
primary batteries
CTH; or
Standard QVC
8507 Electric accumulators, including
separators therefor; whether or
not rectangular (including
square)

CTH or QVC 40%
Ex 8511 Electrical ignition or starting
equipment of a kind used for
spark-ignition or compressionignition internal combustion
engines (e.g. ignition magnetos,

magneto-dynamos, ignition
coils, sparking plugs and glow
plugs, starter motors); generators
(e.g., dynamos, alternators) and
cut outs of a kind used in
conjunction with such engines
CTSH; or
Standard QVC
851190 Parts of electrical ignition or
starting equipment of a kind used
for spark-ignition or
compression-ignition internal
combustion engines (e.g.,

ignition magnetos, magnetodynamos, ignition coils, sparking
plugs and glow plugs, starter
motors); generators (e.g.,

dynamos, alternators) and cutouts of a kind used in
conjunction with such engines.

CTH; or
Standard QVC
Ex 8517 Telephone sets, including
smartphones and other
telephones for cellular networks
or for other wireless networks;

other apparatus for the
transmission or reception of
voice, images or other data,

CTSH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

including apparatus for
communication in a wired or
wireless networks (such as local
or wide area network), other than
transmission or reception
apparatus of heading 8443, 8525,

8527, or 8528
851771 Aerials and aerial reflectors of
all kinds, parts suitable for use
therewith
CTH; or
Standard QVC
851779 Other parts of telephone sets,

including smartphones and other
telephones for cellular networks
or for other wireless networks;

other apparatus for the
transmission or reception of
voice, images or other data,

including apparatus for
communication in a wired or
wireless networks (such as local
or wide area network), other than
transmission or reception
apparatus of heading 8443, 8525,

8527, or 8528
CTH; or
Standard QVC
8536 Electrical apparatus for
switching or protecting electrical
circuits, or for making
connections to or in electrical
circuits (e.g., switches, relays,

fuses, surge suppressors, plugs,

sockets, lamp-holders and other
connectors, junction boxes), for
a voltage not exceeding 1000
volts; connectors for optical
fibres, optical fibre bundles or
cables
CTH; or
Standard QVC
8537 Boards, panels, consoles, desks,

cabinets and other bases,

equipped with two or more
apparatus of heading 8535, 8536
for electric control or the
CTH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

distribution of electricity,

including those incorporating
instruments or apparatus of
Chapter 90, and numerical
control apparatus, other than
switching apparatus of heading
no. 8517
8538 Parts suitable for use solely or
principally with the apparatus of
heading 8535, 8536 or 8537
CTH; or
Standard QVC
Ex 8539 Electric filament or discharge
lamps, including sealed beam
lamp units and ultra-violet or
infra-red lamps; arc lamps; lightemitting diode (LED) light
sources (excluding modules)

CTSH; or
Standard QVC
853951 Light-emitting diode (LED)

modules
CTH; or
Standard QVC
853990 Parts of electric filament or
discharge lamps, including
sealed beam lamp units and
ultra-violet or infra-red lamps;

arc lamps; light-emitting diode
(LED) light sources
CTH; or
Standard QVC
Ex 8541 Semiconductor devices (e.g.

diodes, transistors,

semiconductor based
transducers); light-emitting
diodes (LED), whether or not
assembled with other LEDs;

mounted piezo-electric crystals
CTSH; or
Standard QVC
854142 Photovoltaic cells not assembled
in modules or made up into
panels
CTSH and Standard QVC
854143 Photovoltaic cells assembled in
modules or made up into panels
CTSH and Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

854149 Other photosensitive
semiconductor devices
CTSH and Standard QVC
854159 Other semiconductor devices CTSH and Standard QVC 854390 Parts of electrical machines and
apparatus, having individual
functions, not specified or
included elsewhere in chapter 85
CTH; or
Standard QVC
8544 Insulated (including enamelled
or anodised) wire, cable
(including co-axial cable) and
other insulated electric
conductors, whether or not fitted
with connector; optical fibre
cables, made up of individually
sheathed fibres, whether or not
assembled with electric
conductors or fitted with
connectors
CTSH; or
Standard QVC
Chapter 86 Railway or tramway
locomotives, rolling-stock and
parts thereof; railway or
tramway track fixtures and
fittings and parts thereof;

mechanical (including electromechanical) traffic
signalling equipment of all kinds
CTSH and Standard QVC
Ex Chapter 87 Vehicles other than railway or
tramway rolling- stock, and parts
and accessories thereof
CTH and a QVC of not
less than:

(a) 45% of the exworks price under
the build-down
method; or

(b) 50% of the free-onboard value under
the build-down
method; or

(c) 40% of either the
ex-works price or
free-on-board
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

value under the
build-up method
8703 Motor cars and other motor
vehicles principally designed for
the transport of persons (other
than those of heading 8702),

including station wagons and
racing cars
A QVC of not less than
35%
8706 Chassis fitted with engines, for
the motor vehicles of heading
8701 to 8705
CTH; or
a QVC of not less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free onboard value under
the build-down
method; or

(c) 45% of either the
ex-works price or
free-on-board
value under the
build-up method
8707 Bodies (including cabs), for the
motor vehicles of heading 8701
to 8705
8708 Parts and accessories of the
motor vehicles of heading 8701
to 8705
8711 Motorcycles (including mopeds)

and cycles fitted with an
auxiliary motor, with or without
side-cars; side-cars
A QVC of not less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free onboard value under
the build-down
method; or

(c) 40% of either the
ex-works price or
free-on-board
value under the
build-up method
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

8714 Parts and accessories of vehicles
of heading 8711 to 8713
CTH; or
a QVC of not less than:

(a) 50% of the exworks price under
the build-down
method; or

(b) 55% of the free onboard value under
the build-down
method; or

(c) 40% of either the
ex-works price or
free-on-board
value under the
build-up method
8716 Trailers and semi-trailers; other
vehicles, not mechanically
propelled; parts thereof
CTSH and Standard QVC
Chapter 88 Aircraft, spacecraft, and parts
thereof
CTH; or
Standard QVC
Chapter 89 Ships, boats and floating
structures
CTSH and Standard QVC
Ex Chapter 90 Optical, photographic,

cinematographic, measuring,

checking, precision, medical or
surgical instruments and
apparatus; parts and accessories
CTSH and Standard QVC
901814 Scientigraphic apparatus CTSH; or
Standard QVC
901841 Dental drill engines, whether or
not combined on a single base
with other dental equipment
CTSH; or
Standard QVC
901849 Other instruments and
appliances, used in dental
sciences: other
CTSH; or
Standard QVC
Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

901850 Other ophthalmic instruments
and appliances
CTSH; or
Standard QVC
901910 Mechano-therapy appliances;

massage apparatus;

psychological aptitude-testing
apparatus
CTH; or
Standard QVC
9020 Other breathing appliances and
gas masks, excluding protective
masks having neither mechanical
parts nor replaceable filters
CTH; or
Standard QVC
902121 Artificial teeth CTSH; or
Standard QVC
902129 Other dental fittings CTSH; or
Standard QVC
902139 Other artificial parts of the body:

other
CTH
902213 Apparatus based on the use of xrays for dental uses, including
radiography or radiotherapy
apparatus
CTSH; or
Standard QVC
902214 Apparatus based on the use of xrays for medical, surgical or
veterinary uses, including
radiography or radiotherapy
apparatus
CTSH; or
Standard QVC
902229 Apparatus based on the use of
alpha, beta, gamma or other
ionising radiations for other than
medical, surgical, dental or
veterinary uses, including
radiography or radiotherapy
apparatus
CTSH; or
Standard QVC
902290 Other X-ray generators, high
tension generators, control
panels and desks, screens,

CTSH and a QVC of not
less than:

Chapter/
heading/ subheading
(Column 1)

Description
(Column 2)

Product Specific Rule of
Origin
(Column 3)

examination or treatment tables,

chairs and the like, including
parts and accessories

(a) 35% of the exworks price under
the build-down
method; or

(b) 40% of the free-onboard value under
the build-down
method; or

(c) 30% of either the
ex-works price or
free-on-board
value under the
build-up method
Chapter 91 Clocks and watches and parts
thereof
CTSH and Standard QVC
Chapter 92 Musical instruments; parts and
accessories of such articles
CTH and Standard QVC
Chapter 93 Arms and ammunition; parts and
accessories thereof
CTH and Standard QVC
Chapter 94 Furniture; bedding, mattresses,

mattress supports, cushions and
similar stuffed furnishings;

luminaires and lighting fittings,

not elsewhere specified or
included; illuminated signs,

illuminated name-plates and the
like; prefabricated buildings
CTH and Standard QVC
Chapter 95 Toys, games and sports
requisites; parts and accessories
thereof
CTH and Standard QVC
Chapter 96 Miscellaneous manufactured
articles
CTSH and Standard QVC
Chapter 97 Works of art, collectors’ pieces
and antiques
CTSH and Standard QVC

Annexure-B
(See clause (c) of sub-rule (2) of rule 16)

(Origin Declaration Template)

Origin Declaration
India – United Kingdom Comprehensive Economic and Trade Agreement

1. Signatory ☐ Exporter
☐ Producer
Signatory’s Name…………………………….………………………………………………………...

Title………………………………………………………………………………….............................. E-mail address……………………………………….…………………………………………………
Telephone Number……………………………………………………….…………………………….

2. Exporter details (if known)

:

3. Producer details (if different from
exporter)

:

Name: ………………………………………….. Name: …………………………………………...

Address: ………………………………………... Address: ………………………………………… Telephone Number (if known): ………………... Telephone Number (if known): ………………… E-mail Address (if known): ……………………. E-mail Address (if known): ……………………..

4. Importer details (if known)

:

Name: …………………………………………..

Address: ………………………………………...

Telephone Number (if known): …………………
E-mail Address (if known): …………………….

5. Signatory’s Reference number
Reference number: ………………………………

6 (a). HS Tariff Classification (6-digit level):

7. Origin criterion:

6 (b). Description of the Good(s):

☐
WO (wholly obtained means goods grown or
produced entirely within the Parties: rule 4
(Wholly Obtained))

6 (c). Invoice number and date (if applicable):

☐
PE (means goods produced exclusively from
originating materials: rule 3 (Origin Criteria))

☐
PSR (means goods that incorporate nonoriginating materials in their final stage of
☐
the invoice was issued in a non-party or issued
by a person other than the exporter or producer,

as per sub-rule (5) of rule 16 (Proof of Origin)

production and meet the product specific rule:

rule 3 (Origin Criteria)

Identify product specific rule ……………………

(As identified for the good in Annexure-A)

8.

Non-Alteration (if known and applicable):

☐
the good(s) will be transported through or
stored in a non-party before being imported into
the importing Party: rule 15 (Non- Alteration)

For HS 2208 (if applicable):

☐
bottling has taken place in a non-Party
9.

Roll Up/Absorption Principle (if applicable):

☐
The good(s) meet the product specific rule by
application of rule 7 (Materials Used in
Production).

10.

Single or Multiple Shipment:

☐
Single shipment or ☐ Multiple shipments of identical goods (For Indian exporters and producers only, as per sub-rule (3) of rule 16 (Proof of Origin))

For multiple shipments of identical goods imported into the UK, provide the time period covered by the declaration ……………..

(This time period must be within 12 months from declaration being completed)

11.

Declaration (signed by the signatory listed above):

The exporter/producer certifies that the good(s) described in this document qualify as originating and the information contained in this document is true and accurate. The exporter/producer is responsible for proving such representations, which may include, where appropriate, written representation(s) from the supplier(s). In accordance with rule 25 (Record Keeping Requirements) and rule 26 (Verification of Origin), the exporter/producer agrees to maintain and present upon request, or make available during a verification visit, information, which may include documentation, relating to the origin of the goods and where applicable, materials.

Signature: ……………………………………………………………………………………………..

Date: …………………………………………………………………………………………………...

☐
Completed retrospectively

- short explanation
…………………………………………………….

Origin Declaration Notes
1.

These details are not required if the producer is the signatory and the exporter’s details are not known. The address of the exporter must be in the exporting Party, which shall be either India or the United Kingdom.

2.

The address must be in the Party where the good is produced. If the producer is the signatory they must be located in the exporting Party, which shall be either India or the United Kingdom. If the exporter is the signatory and there are multiple producers, the entry may state “various”.

3.

The address of the importer must be in either India or the United Kingdom.

4.

Provide the signatory’s reference number:

(a)

for signatories in the United Kingdom, this shall be the exporter reference number assigned in accordance with the laws and regulations of the United Kingdom; and

(b)

for signatories in India this shall be the Importer Exporter Code (“IEC”).

5.

If the origin declaration has been completed retrospectively, after the importation of the good in accordance with sub-rule (8) of rule 16, tick this box and provide a short explanation of the reason(s) why, such as, for example, because the importer did not request the origin declaration earlier.

Annexure-C
(See clause (c) of sub-rule (2) of rule 16)

(Certificate of Origin Template)

Certificate of Origin
India – United Kingdom Comprehensive Economic and Trade Agreement

1. Signatory: ☐ Exporter ☐ Producer
Signatory’s Name…………………………….………………………………………………………...

Title………………………………………………………………………………….............................. E-mail address……………………………………….…………………………………………………
Telephone Number……………………………………………………….…………………………….

2. Exporter details (if known);

Name: …………………………………………..

Address: ………………………………………...

Telephone Number (if known): ………………...

E-mail Address (if known): …………………….

3. Producer details (if different from
exporter):

Name: …………………………………………...

Address: …………………………………………
Telephone Number (if known): …………………
E-mail Address (if known): ……………………..

4. Importer details (if known):

Name: …………………………………………..

Address: ………………………………………...

Telephone Number (if known): …………………
E-mail Address (if known): …………………….

5. Signatory’s Reference number:

Reference number (IEC): ………………………..

6 (a). HS Tariff Classification (6-digit level):

6 (b). Description of the Good(s):

6 (c). Invoice number and date (if applicable):

7.

Origin criterion:

☐
WO (wholly obtained means goods grown or
produced entirely within the Parties: rule 4
(Wholly Obtained))

☐
PE (means goods produced exclusively from
originating materials: rule 3 (Origin Criteria))

☐
PSR (means goods that incorporate nonoriginating materials in their final stage of
production and meet the product specific rule:

rule 3 (Origin Criteria)

☐
the invoice was issued in a non-party or issued
by a person other than the exporter or producer,

as per sub-rule (5) of rule 16 (Proof of Origin)

Identify product specific rule ……………………
(As identified for the good in Annexure-A
(Product Specific Rules of Origin))

8.

Non-Alteration (if known and applicable):

☐
the good(s) will be transported through or
stored in a non-party before being imported into
the importing Party: rule 15 (Non- Alteration)

For HS 2208 (if applicable):

☐
bottling has taken place in a non-Party
9.

Roll Up/Absorption Principle (if applicable):

☐
The good(s) meet the Product Specific Rule by
application of rule 7 (Materials Used in
Production).

10.

Single or Multiple Shipment:

Does this Origin Declaration relate to a:

☐
Single shipment or ☐ Multiple shipments of identical goods (For Indian exporters and producers only, as per sub-rule (3) of rule 16 (Proof of Origin))

For multiple shipments of identical goods imported into the UK, provide the time period covered by the declaration ……………..

(This time period must be within 12 months from declaration being completed)

11.

Declaration (signed by the signatory listed above):

The exporter/producer certifies that the good(s) described in this document qualify as originating and the information contained in this document is true and accurate. The exporter/producer is responsible for proving such representations, which may include, where appropriate, written representation(s) from the supplier(s). In accordance with rule 25 (Record Keeping Requirements) and rule 26 (Verification of Origin), the exporter/producer agrees to maintain and present upon request, or make available during a verification visit, information, which may include documentation, relating to the origin of the goods and where applicable, materials.

Signature: ……………………………………………………………………………………………..

Date: …………………………………………………………………………………………………...

☐
Completed retrospectively

- short explanation
…………………………………………………….

12. Certification by Issuing Authorities:

It is hereby certified, on the basis of control carried out, that the declaration by the exporter or producer is correct.

Issuing Authority:………………………………………………………………………………………

Certificate of Origin Notes
1.

These details are not required if the producer is the signatory and the exporter’s details are not known. The address of the exporter must be in India.

2.

The address must be in the Party where the good is produced. If the producer is the signatory they must be located in India. If the exporter is the signatory and there are multiple producers, the entry may state “various”.

3.

The address of the importer must be in the United Kingdom.

4.

Provide the Indian signatory’s reference number. This shall be the Importer Exporter Code (“IEC”).

5.

If the certificate of origin has been completed retrospectively, after importation of the good in accordance with sub-rule (8) of rule 16, tick this box and provide a short explanation of the reason(s) why, such as, for example, because the importer did not request the certificate of origin earlier.

Seal …………………………………………………………………………………………………….

Name: ………………………………………………………………………………………………….

Address:

…………………………………......................................................................... Telephone Number:……………………………………………………………………………

E-mail Address:……………………………………………………………………………..

Annexure-D
(See sub-rule (7) of rule 17)

(Framework for the Authentication Process of Origin Declarations)

For the purpose of enabling India to establish the authenticity of an origin declaration, in accordance with rule 17:

1. an exporter or producer intending to export goods to India and complete an origin declaration under the Agreement shall provide the customs authority of the United Kingdom with the information necessary to authenticate their identity;

2. the customs authority of the United Kingdom shall review the information provided by the exporter or producer and shall share relevant information, as agreed by the Parties, electronically with the customs authority of India. The information shared shall include unique reference numbers, registered email addresses of exporters and producers and other information as agreed by the Parties necessary to identify the exporter or producer so as to enable confirmation that the same exporter or producer has completed the origin declaration. The customs authority of the United Kingdom shall update the information from time to time and inform the customs authority of India of such amendments. The customs authority of India shall use this information to create and maintain a database of United Kingdom exporters and producers;

3. the exporter or producer shall send the origin declaration, completed in accordance with rule 16 and Annexure-B, to the nodal email address of the customs authority of India and to the email address of the Indian importer within the same email. The origin declaration shall be sent as an attachment in a file type to be agreed between the Parties. The subject line of the email shall follow a structure to be agreed between the Parties;

4. the customs authority of India shall review the information sent by the exporter or producer in accordance with paragraph 3 against the database referred to in paragraph 2;

5. if the information is successfully matched, the authenticity of the origin declaration shall be established. The customs authority of India shall notify the email address of the exporter or producer that sent the email referred to in paragraph 3 that authenticity has been established and that a claim for preferential tariff treatment using the origin declaration may be made by the Indian importer. The importer shall be copied into this notification email. The contents of the notification email shall be agreed by the Parties;

6. if the information is not successfully matched, the customs authority of India shall notify the email address of the exporter or producer that sent the email referred to in paragraph 3 that authenticity has not been established. The Indian importer shall be copied into this notification email. The contents of the notification email shall be agreed by the Parties. The customs authority of India shall also automatically send an alert to the registered email address corresponding to the unique reference number held on the database referred to in paragraph 2; and

7. if the authenticity of the origin declaration is not established through this process, the importer shall not be entitled to make a claim for preferential tariff treatment. The exporter or producer may start the authentication process again by sending the email referred to in paragraph 3 from a registered email address corresponding to the unique reference number in the database referred to in paragraph 2, or by updating their information with the customs authority of the United Kingdom in order for the customs authority of the United Kingdom to restart the process from paragraph 2.

For greater certainty, the authentication process set out in this Annexure does not constitute a claim for preferential tariff treatment and no penalty shall be imposed solely on the basis that authenticity has not been established in accordance with this Annexure.

Annexure-E
(See sub-rule (6) of rule 17)

(Data Protection and Processing of Personal Information)

1. Definitions.- For the purposes of this Annexure:

(a) “data controller” (also known as data fiduciary in India) means the person who, alone or jointly with others, determines the purposes and means of the processing of personal data;

(b) “data subject” (also known as data principal in India) means an identifiable natural person who can be identified, directly or indirectly, in particular by reference to an identifier such as a name, an identification number, location data, an online identifier or to one or more factors specific to the physical, physiological, genetic, mental, economic, cultural or social identity of that natural person;

(c) “personal data” means any information relating to a data subject transferred from the transferring customs authority to the receiving customs authority in accordance with Annexure-D;

(d) “personal data breach” means a breach of data security leading to the accidental or unlawful destruction, loss, alteration, unauthorised disclosure of, or unauthorised access to, the personal data transmitted, stored or otherwise processed;

(e) “process”, “processed” or “processing” means any operation or set of operations which are performed on personal data or on sets of personal data, whether by wholly or partially automated means, such as collection, recording, organisation, structuring, storage, adaptation or alteration, retrieval, consultation, use, disclosure by transmission, dissemination or otherwise making available, alignment or combination, restriction, erasure or destruction;

(f) “professional secrecy” means the laws and regulations applicable to a customs authority obliging it not to disclose non-public information received in an official capacity;

(g) “receiving customs authority” means the customs authority in India receiving the requested information pursuant to the Agreement;

(h) “receiving Party” means India;

(i) “transferring customs authority” means the customs authority in the United Kingdom sending the requested information pursuant to the Agreement; and

(j) “transferring Party” means the United Kingdom.

2. Scope.- (1) This Annexure shall apply to the transfer of personal data between the customs authorities of the Parties, for general processing, in accordance with sub-rules (6) and (7) of rule 17 and Annexure-D. In accordance with Annexure-D, the scope of personal data covered under this Annexure shall be limited to data such as unique reference numbers, registered email addresses of exporters and producers and other information as agreed by the Parties, necessary as part of any transfer of information. For greater certainty, this Annexure does not apply to the origin declaration under rule 16.

(2) The Parties shall ensure that the appropriate safeguards in this Annexure are in place for the general processing of personal data and protecting the personal data consistent with the laws, regulations and internal policies and procedures applicable to each Party.

(3) The transfer of personal data between the Parties shall be deemed to be a data controller to data controller transfer, for the purposes of the transferring customs authority’s legislation.

3. Purpose and Use Limitation.- (1) Subject to sub-paragraph 2, the transfer of personal data shall solely be for the specified purpose of establishing the authenticity of an origin declaration in accordance with sub-rules (6) and (7) of rule 17 and Annexure-D. The receiving Party shall not further process the relevant personal data in a manner that is incompatible with the purpose for which it was transferred. Compatible processing includes processing pursuant to the terms of Annexure-D, administration and enforcement of determination of origin or of customs matters under these rules, and any other authentication instruments that may be agreed between the Parties.

(2) The receiving customs authority shall not process the relevant personal data for purposes other than those specified herein sub-paragraph (1), unless it has received written approval from the transferring customs authority.

4. Data Accuracy and Minimisation.- (1) The transferring customs authority shall only transfer personal data that is adequate, relevant and limited to what is necessary in relation to the purpose of processing. The transferring customs authority shall ensure that, to the best of its knowledge, the personal data it transfers is accurate and up to date.

(2) If a customs authority becomes aware that the personal data it has transferred or received is inaccurate or has become outdated, it shall inform the other customs authority without undue delay. Each customs authority shall take reasonable steps to ensure that inaccurate personal data is erased, corrected or otherwise rectified as appropriate and in a timely manner, having regard to the purpose of processing.

5. Storage Limitation.- The receiving customs authority shall retain the personal data no longer than necessary and appropriate for the purpose for which it is processed, including any administrative, quasi-judicial or judicial proceedings initiated for the failure to comply with laws and regulations implementing these rules. The receiving customs authority shall put in place appropriate technical or organisational measures to ensure compliance with this obligation.

6. Scrutiny of Processing.- (1) The transferring customs authority during the transmission of the personal data and the receiving customs authority upon receipt of the personal data, shall implement appropriate technical and organisational measures to ensure the security of the personal data, including protection against accidental or unlawful destruction, loss, or alteration, and protection against unauthorised disclosure or access.

(2) Subject to sub-paragraph 3, in the event of a personal data breach concerning personal data processed by the transferring customs authority or the receiving customs authority, the customs authority concerned shall notify the other customs authority as soon as possible but not later than twenty-four hours from the time of discovering the personal data breach. The notification may include appropriate restrictions as to the further transmission of the personal data.

(3) In the event of personal data breach, the customs authority concerned may delay or omit the notification when such notification could endanger security of the Party or any form of public security operations.

(4) In the event of personal data breach, the customs authority concerned shall use reasonable and appropriate means to remedy the personal data breach, including measures to minimise and mitigate possible adverse effects and prevent such a breach from taking place again.

(5) In the event of personal data breach, the customs authority concerned shall document, report, investigate and keep records of the personal data breach, including its effects and any remedial action taken. The other customs authority may request information on the outcome of the investigation, relating to transfers of personal data under this

Annexure.

7. Access.- (1) Each customs authority shall ensure it has appropriate measures in place to respond without undue delay, to any enquiries and requests it receives from data subjects relating to the processing of their personal data pursuant to this Annexure, subject to the restrictions specified in paragraph 10.

(2) In particular, upon request by a data subject, the relevant customs authority to the extent applicable shall provide the following:--

(a) confirmation to the data subject as to whether personal data relating to them is being processed;

(b) a copy of the personal data relating to them;

(c) confirmation that the personal data held by the receiving customs authority is consistent with the data received from the transferring Party;

(d) the information contained in paragraph 11;

(e) the information on any onward transfer in paragraph 13; and

(f) the information on the right to lodge a complaint with the customs authority.

(3) The transferring customs authority shall, at the request of the receiving customs authority, cooperate with the receiving customs authority in responding to enquiries and requests from data subjects under sub-paragraphs (1) and (2).

(4) Each customs authority shall provide that the information specified in sub-paragraph (2) is provided free of charge within the time limits specified in paragraph 12.

(5) In case where the provision of such information is denied or restricted, the customs authority shall inform the data subject in writing without undue delay, setting out the basis for the denial or restriction.

(6) Each customs authority may publish guidance relating to the operation of this paragraph.

8. Rectification.- (1) Each customs authority shall ensure that data subjects are able to seek the correction or rectification of their personal data if they assert that it is inaccurate, no longer necessary for the purposes for which it was collected or processed or has not been processed in accordance with the applicable legal requirements or requirements of this Annexure. Correction or rectification may include supplementation, erasure, blocking or other measures or methods for addressing inaccuracies or improper processing. On request by a data subject seeking correction or rectification, the customs authority that received the request shall liaise with the other customs authority when considering the request. Upon reaching a decision, the customs authority that received the request shall inform the data subject, without undue delay, whether the data has been corrected or rectified or whether the request has been denied and provide reasons for the denial.

(2) In case where the customs authority concludes that personal data it has received under the Agreement is inaccurate, has been improperly processed or has been kept longer than necessary following a request by a data subject under paragraph 7 or through its own investigation or inquiry, it shall take the correction or rectification measures specified in subparagraph (1), as appropriate.

(3) The transferring customs authority shall, at the request of the receiving customs authority, provide reasonable assistance to the receiving customs authority in taking any appropriate correction or rectification measures pursuant to sub-paragraph (1) or (2).

(4) The correction or rectification request by the data subject in a particular case may be subject to reasonable restrictions as specified in paragraph 10. If correction or rectification is denied or restricted, the customs authority that received the request shall, without undue delay, inform the data subject in writing as to the basis for the denial or restriction.

(5) Each customs authority may publish guidance relating to the operation of this paragraph.

9. Automated Decision.- If a customs authority uses solely automated decision making, it shall use its best endeavours to have suitable measures in place to inform the relevant data subject about the reasons underlying the automated decision where this has resulted in authenticity not being established under Annexure-D.

10. Restrictions.- (1) Each Party shall provide that the measures specified in paragraphs 7 and 8 are subject to the Party’s legal obligation not to disclose confidential information pursuant to professional secrecy or other legal obligations.

(2) Each Party may restrict disclosure to prevent prejudice or harm to supervisory or enforcement functions of an authority of the Party acting in the exercise of the official authority vested in it.

(3) Each Party shall provide that provisions restricting disclosure shall only be relied on, if necessary, provided by law and in accordance with this Annexure. Each Party shall provide that reliance continues only for as long as the reason for the restriction on disclosure exists.

(4) The receiving customs authority shall ensure that the relevant data subject is informed in writing about the restriction applied, without undue delay, unless doing so would prejudice the reasons for the restriction.

11. Transparency.- (1) Each Party shall make a transparency notice available to data subjects, describing in a clear and accessible manner as to how personal data under this

Annexure may be processed by its customs authority in its capacity as a transferring or receiving authority.

(2) The transparency notice shall provide information on the purposes of processing, rights available to data subjects and procedures to exercise them, relevant safeguards and any limitations or conditions applicable to such processing.

(3) Each Party shall ensure that the transparency notice is published on an official government website and remains accessible to data subjects along with a copy of this

Annexure.

12. Time Limits.- (1) Subject to sub-paragraph (2), each Party shall address and respond to a request from a data subject made in accordance with paragraph 7 or paragraph 8 not later than one month from the date it received the request.

(2) Each Party may further extend the period to respond to a request made pursuant to paragraph 7 by up to sixty days, taking into account the complexity and number of requests. Each Party shall notify the relevant data subject of the extended response period within thirty days of the request.

13. Onward Disclosure and Transfer of Personal Data.- (1) Subject to sub-paragraph (2), the receiving customs authority shall ensure that personal data received pursuant to

Annexure-D is only disclosed and transferred to other national customs enforcement, regulatory or administrative authorities in that Party if:--

(a) it is disclosed and transferred for the purpose specified in sub-paragraph (1) of paragraph 3; and

(b) the recipient authority undertakes to comply with the safeguards specified in this Annexure, including by providing the data subjects with the relevant protections and applicable measures.

(2) In exceptional cases, the receiving customs authority may disclose and transfer personal data to other national customs enforcement, regulatory or administrative authorities without the undertakings specified in sub-paragraph (1) provided that the disclosure or transfer of the personal data is for important reasons of public interest or necessary for the establishment, exercise or defence of a legal claim.

14. Administrative Redress.- (1) Each Party shall ensure that a data subject is entitled to administrative redress where the data subject believes that a request made in accordance with paragraph 7 or paragraph 8 has been improperly denied.

(2) Each Party shall provide that a designated authority or person (“reviewer”) reviews and, if appropriate, scrutinises any complaint raised by a data subject with a view to determining whether the processing of that data subject’s personal data by the Party constitutes an infringement of that Party’s laws and regulations or any of the requirements specified in this Annexure.

(3) Each Party shall provide that the reviewer may, where considered appropriate, inform the relevant data subject about the progress of their complaint. The reviewer shall formally respond to the complaint within thirty days of its receipt, or in exceptional cases, within forty-five days.

(4) Each Party shall provide that a formal written response setting out its determination and any recommendations relating to the matters raised includes details of the complaint escalation process, including judicial redress pursuant to paragraph 15, that the relevant data subject may pursue if they are not satisfied with the outcome of the handling by the reviewer.

15. Judicial Redress.- (1) Each Party shall ensure that if a data subject believes that that Party has failed to comply with the obligations specified in paragraphs 7, 8 or 14, or believes that their personal data has been subject to a personal data breach, that data subject can seek judicial redress against that Party following that Party’s domestic appeal and dispute resolution process as part of the data protection laws and regulations, as appropriate.

(2) In the event of a dispute between a data subject and a Party, that Party shall inform the other Party of the dispute. If appropriate, the other Party shall cooperate in resolving the dispute.

(3) Without prejudice to any other judicial redress available, sub-paragraphs (1) and (2) shall apply with respect to the processing of a data subject’s personal data under the law of the Party in which redress is required.

16. Joint Review.- The Parties shall conduct periodic joint reviews of the policies and procedures that implement this Annexure and their effectiveness through the Working Group on Rules of Origin.

17. Suspension.- (1) If the transferring Party considers that the receiving Party has materially breached this Annexure and has sufficient evidence to support such determination, it may suspend, in whole or in part, the transfer of personal data pursuant to sub-rules (6) and (7) of rule 17 and Annexure-D by written notification to the receiving Party through the Working Group on Rules of Origin.

(2) Such suspension shall be limited to circumstances involving a serious or systemic failure by the receiving Party to comply with its obligations under this Annexure. A suspension shall not be initiated in response to isolated or minor breaches that do not constitute a material failure to comply with this Annexure, particularly where the receiving Party has taken prompt and appropriate remedial action to contain the breach and prevent its recurrence.

(3) The transferring Party may only make a written notification as described in subparagraph (1) where it deems the conditions specified in sub-paragraph (2) have been met and after the Parties have engaged in a reasonable period of consultation through the customs authorities without reaching a resolution.

(4) The suspension shall take effect twenty days from the date of notification. Such suspension may be lifted by the transferring Party by written notification to the receiving Party. The suspension shall be lifted immediately on receipt of such notification. Any suspension under this paragraph shall be subject to a review by the Parties every ninety days.

(5) Notwithstanding anything contained in sub-paragraphs (1) to (3), in the event of a material personal data breach, such as significant cyberattacks, physical security breaches or other serious incidents that compromise the integrity of the system or the personal data, the transferring Party may suspend transfers of personal data with immediate effect, taking into account the nature of the breach and risks to individuals. A suspension shall not be initiated in response to isolated or minor breaches, particularly where the receiving Party has taken prompt and appropriate remedial action to contain the breach and prevent its recurrence.

(6) The receiving customs authority shall continue to accept origin declarations as applicable proofs of origin in accordance with rule 16 in the event that data transfers to enable the authentication process pursuant to sub-rules (6) and (7) of rule 17 and Annexure- D are suspended under this paragraph.

(7) Where a personal data breach occurs prior to the receipt by the receiving Party, including during transmission of personal data by the transferring Party, the transferring Party may suspend the transfer of personal data in accordance with sub-paragraph 5. The Parties shall enter into consultations without delay to ensure that appropriate remedial measures are taken by the transferring Party to prevent recurrence. Where continued authentication of origin declarations is likely to be impacted by a suspension, the transferring Party shall, in consultation with and agreeable to the receiving Party, identify and implement suitable alternative mechanisms for data transfer within a reasonable period not exceeding three months. These mechanisms shall be subject to joint review every ninety days, with a view to restoring the normal process of data transfers as soon as practicable. Once the risk underlying the suspension has been addressed to the satisfaction of both the Parties, the standard data transfer mechanism shall be reinstated without undue delay.

(8) Notwithstanding any suspension of personal data transfers under sub-paragraphs (1), (5) and (7), personal data falling within the scope of this Annexure and transferred prior to its suspension shall continue to be processed in accordance with this Annexure.

18. Notification.- Each Party shall make reasonable efforts to notify the other Party regarding the adoption of laws or regulations that may materially affect the implementation of this

Annexure, as soon as practicable after such measures are adopted.

[F.No. CBIC-15020/2/2021-ICD-CBEC- PART-I]

(Indrajit Panda)

Under Secretary to the Government of India

Source: Central Board of Indirect Taxes and Customs (CBIC). View the official document.