Skip to main content

Notification · GST

Notification No. 30/2023-Central Tax, DT. 31/07/2023

Dated
31 Jul 2023
Reference no.
30/2023-Central Tax

Seeks to notify special procedure to be followed by a registered person engaged in manufacturing of certain goods.

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-

SECTION (ii)]

Government of India

Ministry of Finance

Department of Revenue

Central Board of Indirect Taxes and Customs

NOTIFICATION

NO. 30/2023–CENTRALTAX

New Delhi, dated the 31st July,2023

S.O.(E).—In exercise of the powers conferred by section 148 of the Central Goods and Services Tax Act,2017 (12 of 2017) (hereinafter referred to as the said Act), the Central Government, on the recommendations of the Council, hereby notifies the following special procedure to be followed by a registered person engaged in manufacturing of the goods, the description of which is specified in the corresponding entry in column (3) of the Schedule appended to this notification, and falling under the tariff item, sub- heading, heading or Chapter, as the case may be, as specified in the corresponding entry in column (2) of the said Schedule, namely: —

1. Details of Packing Machines

(1) All the existing registered persons engaged in manufacturing of the goods mentioned in Schedule to this notification shall furnish the details of packing machines being used for filling and packing of pouches or containers in FORM SRM-I, within 30 days of issuance of this notification, electronically on the common portal,—

FORM SRM-I

Serial No.Make and Model No. of the Machine (including the name of manufacturer)Date of Purchase of the MachineAddress of place of business where installedNo. of TracksPacking Capacity of each trackTotal packing capacity of machineElectricity consumption by the machine per hourSupporting DocumentsUnique ID of the machine (to be auto populated)
(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)
<<Capacity certificate from Chartered Engineer>>

(2) Any person intending to manufacture goods as mentioned in Schedule to this notification, and who has been granted registration after the issuance of this notification, shall furnish the details of packing machines being used for filling and packing of pouches or containers in FORM SRM-I on the common portal, within fifteen days of grant of such registration.

(3) The details of any additional filling and packing machine being installed in the registered place of business shall be furnished, electronically on the common portal, by the said registered person within 24 hours of such installation in FORM SRM-IIA.

(4) Upon furnishing of such details in FORM SRM-I or FORM SRM-IIA, a unique ID shall be generated for each machine, whose details have been furnished by the registered person, on the common portal.

(5) In case, the said registered person has submitted or declared the production capacity of his manufacturing unit or his machines, to any other government department or any other agency or organization, the same shall be furnished by the said registered person in FORM SRM-IA on the common portal, within fifteen days of filing said declaration or submission:

Provided that where the said registered person has submitted or declared the production capacity of his manufacturing unit or his machines, to any other government department or any other agency or organization, before the issuance of this notification, the same shall be furnished by the said registered person in FORM SRM-IA on the common portal, within thirty days of issuance of this notification.

FORM SRM-IA

Serial No.Name of Govt. Department/ any other agency or organizationType of Declaration/ SubmissionDetails of Declaration/Submission
(1)(2)(3)(4)
<<copy of declaration to be uploaded on the portal>>

FORM SRM-IIA

[Details of installation of additional machine(s)]

Seri al No.Make and Model No. of the Machi ne (includ ing the nameDate of Purch ase of the Mach ineDate of install ation of the Machi neAddress of place of business where installedNo. of Tra cksPacki ng Capa city of each trackTotal packin g capacit y of machin eElectr icity consu mptio n by the machi ne per hourSupporting DocumentsUnique ID of the machine (to be auto populated )
of manufa cturer)
(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
<<Capacity certificate from Chartered Engineer> >

(6) The details of any existing filling and packing machine removed from the registered place of business shall be furnished, electronically on the common portal, by the said registered person within 24 hours of such removal

in FORM SRM-IIB.

FORM SRM-IIB

[Details of removal of the existing machine(s)]

Seri alN o.Unique ID of the machineMake and Model No. of the Machin e <<auto-populat ed>>Date of Purchase of the Machine <<auto-populate d>>Address of place of business from where the machine is removed. <<auto-populated> >No. of Tracks <<auto - popula ted>>Packing Capacity of each track <<auto-populate d>>Total packing capacity of machine <<auto-populate d>>Date of Rem ovalReasons for removal/dispo sal of the machine.
(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)
<<Sold to third party>> <<Scrap>>

2. Additional records to be maintained by the registered persons manufacturing the goods mentioned in the

Schedule

(1) Every registered person engaged in manufacturing of goods mentioned in Schedule shall keep a daily record of inputs being procured and utilized in quantity and value terms along with the details of waste generated as well as the daily record of reading of electricity meters and generator set meters in a format as specified in FORM SRM-IIIA in each place of business.

(2) Further, the said registered person shall also keep a daily shift-wise record of machine-wise production, product-wise and brand-wise details of clearance in quantity and value terms in a format as specified in FORM SRM-IIIB in each place of business.

FORM SRM-IIIA

Inputs Register

Day1HSN of the InputDescription of the InputUnit quantityOpening Balance (in units)Quantity procured (in units)Quantity procured ( value in Rs)Qty Consumed (in units)Closing Balance (in units)Waste generated in respect of the said input (qty) (in units)
(1)(2)(3)(4)(5)(6)(7)(8)(9)
HSN1
HSN2
HSN3
………
HSNn
Day 2
Day 3
……
Last Day of Month
Day 1Electricity Reading
Electricity meter readingGenerator set meter reading
Initial Meter ReadingFinal Meter ReadingConsumption (kwH)Initial Meter ReadingFinal Meter ReadingConsumption (kwH)
(1)(2)(3)(4)(5)(6)
Day 2
…..

Last Day of Month

FORM SRM-IIIB

Production Register

1 DayBrand B1Bra nd B2Bra nd Bn
Machine M1( Mention Unique ID of the machine)M 2M nTotal of all machin es………………………………….………………………………….
To tal no . of Po uc h P1 pa ck edUni t Val ue Of Po uch P1Total Value Of Pouches P1 Packed( V1) (in Rs)Tota l no. of Pou ch …Pn pack edVal ue Of Pou ch …P nTotal Value Of Pouc hes Pn Packe d (Vn) (in Rs)Total No. of pouches Packed by Machine M1 (P1+P2+..P n)Total value of Pouches packed By machine M1 (in Rs) (V1+V2 +..Vn)…-- -Total Producti on value of Brand B1 by all machine s (Rs)
Shift 1 00:00 to 00.00 hrs
Shift 2 00:00 to 00.00 hrs
Shift 3 00:00 to 00.00 hrs
Total for Day 1
2 Day
….Dayn the month of
Total for the Month

3. Special Monthly Statement

(1) The said registered person shall submit a special statement for each month in FORM SRM-IV on the common portal, on or before the tenth day of the month succeeding such month.

FORM SRM-IV

Monthly Statement of Inputs used and the final goods produced by the manufacturer of goods specified in

Schedule

PART-A

Total for MonthHSN of the InputDescription of the InputUnit quantityOpening Balance (in units)Quantity procured (in units)Quantity procured ( value in Rs)Qty Consumed (in units)Closing Balance (in units)Waste generated qty (in units)
(1)(2)(3)(4)(5)(6)(7)(8)(9)
HSN1
HSN2
HSN3
…….
HSNn
Month the for TotalElectricity Reading
Electricity meter readingDG set meter reading
Initial Meter Reading on Day 1 of the monthFinal Meter Reading on last day of the monthConsumption (kwH)Initial Meter Reading on Day 1 of the monthFinal Meter Reading on last day of the monthConsumption (kwH)
(1)(2)(3)(4)(5)(6)

Statement of production of goods

PART-B

Brand B1Br an d B2Br an d Bn
Machine M1M 2M nTotal of all machi nes………………………………….………………………………….
Total no. of Pouch P1 packedM RP Val ue Of Po uc h P1Total Value Of Pouch es P1 Packed (V1) (in Rs)Tot al no. of Pou ch Pn pac kedVal ue Of Po uc h PnTota l Valu e Of Pouc hes Pn Pack ed (Vn) (in Rs)Total No. of pouches Packed by Machine M1 (P1+P2 +..Pn)Total value of Pouches packed By machine M1 (in Rs) (V1+V2 +..Vn)…- - -Total Produc tion value of Brand B1 by all machin es (Rs)
Total for the Month

Schedule

S.NoChapter / Heading / Sub-heading / Tariff itemDescription of Goods
(1)(2)(3)
1.2106 90 20Pan-masala
2.2401Unmanufactured tobacco (without lime tube) – bearing a brand name
3.2401Unmanufactured tobacco (with lime tube) – bearing a brand name
4.2401 30 00Tobacco refuse, bearing a brand name
5.2403 11 10'Hookah' or 'gudaku' tobacco bearing a brand name
6.2403 11 10Tobacco used for smoking 'hookah' or 'chilam' commonly known as 'hookah' tobacco or 'gudaku' not bearing a brand name
7.2403 11 90Other water pipe smoking tobacco not bearing a brand name.
8.2403 19 10Smoking mixtures for pipes and cigarettes
9.2403 19 90Other smoking tobacco bearing a brand name
10.2403 19 90Other smoking tobacco not bearing a brand name
11.2403 91 00“Homogenised” or “reconstituted” tobacco, bearing a brand name
122403 99 10Chewing tobacco (without lime tube)
13.2403 99 10Chewing tobacco (with lime tube)
14.2403 99 10Filter khaini
15.2403 99 20Preparations containing chewing tobacco
16.2403 99 30Jarda scented tobacco
17.2403 99 40Snuff
18.2403 99 50Preparations containing snuff
19.2403 99 60Tobacco extracts and essence bearing a brand name
20.2403 99 60Tobacco extracts and essence not bearing a brand Name
21.2403 99 70Cut tobacco
22.2403 99 90Pan masala containing tobacco ‘Gutkha’
23.2403 99 90All goods, other than pan masala containing tobacco 'gutkha', bearing a brand name
24.2403 99 90All goods, other than pan masala containing tobacco 'gutkha', not bearing a brand name

Explanation.–

(1) In this Schedule, “tariff item”, “heading”, “sub-heading” and “Chapter” shall mean respectively a tariff item, heading, sub-heading and Chapter as specified in the First Schedule to the Customs Tariff Act, 1975 (51 of 1975).

(2) The rules for the interpretation of the First Schedule to the said Customs Tariff Act, 1975, including the Section and Chapter Notes and the General Explanatory Notes of the First Schedule shall, so far as may be, apply to the interpretation of this notification.

(3) For the purposes of this notification, the phrase “brand name” means brand name or trade name, whether registered or not, that is to say, a name or a mark, such as symbol, monogram, label, signature or invented word or writing which is used in relation to such specified goods for the purpose of indicating, or so as to indicate a connection in the course of trade between such specified goods and some person using such name or mark with or without any indication of the identity of that person.

[F.No.CBIC-20006/20/2023-GST]

(Alok Kumar)
Director

Source: Central Board of Indirect Taxes and Customs (CBIC). View the official document.