Skip to main content

Notification · Customs

Notification No. 11/2024-Customs (ADD), DT. 27/06/2024

Dated
27 Jun 2024
Reference no.
11/2024-Customs (ADD)

Seeks to impose anti-dumping duty on alloy steel chisel/tool and hydraulic rock breaker in fully assembled condition, originating in or imported from China PR and Korea RP

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA

MINISTRY OF FINANCE

(DEPARTMENT OF REVENUE)

Notification No. 11/2024-Customs (ADD)

New Delhi, the 27th June, 2024

G.S.R. ---(E).- Whereas in the matter of ‘alloy steel chisel/ tool and hydraulic rock breaker in fully assembled condition’ (hereinafter referred to as the subject goods) falling under chapter headings 84314930 and 84314990 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR and Korea RP (hereinafter referred to as the subject countries), and imported into India, the designated authority in its final findings vide notification number 6/8/2022-DGTR, dated the 28th March, 2024, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 28th March, 2024, has come to the conclusion that–

(i) the subject goods have been exported to India from subject countries below its normal value, thus resulting in dumping of the product;

(ii) the domestic industry has suffered material injury due to dumping of the subject goods;

(iii) the material injury has been caused by the dumped imports of the subject goods originating in or exported from the subject countries,

and has recommended imposition of definitive anti-dumping duty on the imports of subject goods, originating in, or exported from the subject countries and imported into India, in order to remove injury to the domestic industry.

Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs Tariff Act, read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Anti-dumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the aforesaid final findings of the designated authority, hereby imposes on the subject goods, the description of which is specified in column (3) of the Table below, falling under chapter heading of the First Schedule to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the countries as specified in the corresponding entry in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the producers as specified in the corresponding entry in column (6), and imported into India, an antidumping duty at a rate as specified in the corresponding entry in column (7) of the said Table, namely:-

Table

S No.HeadingDescription of GoodsCountry of OriginCountry of ExportProducerDuty (% of CIF Value in USD)
(1)(2)(3)(4)(5)(6)(7)
1.84314930 and 84314990Hydraulic Rock Breakers#1China PRAny country including China PRYantai Eddie Precision Machinery Co., Ltd131.11%
2.-do-Alloy Steel Chisels#2China PRAny country including China PRYantai Eddie Precision Machinery Co., Ltd29.21 %
3.-do-Hydraulic Rock Breakers#1China PRAny country including China PRNINGBO YINZHOU GET MACHINERY LTD.26.95%
4.-do-Alloy Steel Chisels#2China PRAny country including China PRNINGBO YINZHOU GET MACHINERY LTD.4.55%
5.-do-Hydraulic Rock Breakers#1China PRAny country including China PRAny producer other than S.No. 1 to 4 above162.50 %
6.-do-Hydraulic Rock Breakers#1Any country other than subject countriesChina PRAny producer162.50 %
7.-do-Alloy Steel Chisels#2China PRAny country including China PRAny producer other than S.No. 1 to 4 above29.21 %
8.-do-Alloy Steel Chisels#2Any country other than subject countriesChina PRAny producer29.21 %
9.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPSoosan Heavy Industries Co., Ltd.NIL
10.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPSoosan Heavy Industries Co., Ltd.NIL
11.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPDAEMO Engineering Co. Ltd.9.43%
12.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPDAEMO Engineering Co. Ltd.12.47%
13.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPD and A Heavy Industries Co., Ltd.Nil
14.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPD and A Heavy Industries Co., Ltd.12.47%
15.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPHyundai Everdigm Corporation11.91%
16.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPHyundai Everdigm Corporation12.47%
17.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPFEEL INDUSTRIAL ENGINEERING CO. LTD.8.16%
18.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPFEEL INDUSTRIAL ENGINEERING CO. LTD.12.47%
19.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPHANSUNG SPECIAL MACHINERY CO., LTD52.77%
20.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPHANSUNG SPECIAL MACHINERY CO., LTDNil
21.-do-Hydraulic Rock Breakers#1Korea RPAny country including Korea RPAny producer other than S. No. 9 to 20 above52.77%
22.-do-Hydraulic Rock Breakers#1Any country other than subject countriesKorea RPAny producer52.77%
23.-do-Alloy Steel Chisels#2Korea RPAny country including Korea RPAny producer other than S.No. 9 to 20 above12.47%
24.-do-Alloy Steel Chisels#2Any country other than subject countriesKorea RPAny producer12.47%

#1
For Hydraulic Rock Breakers:

a. Hydraulic Rock Breakers are used in construction and mining industry along with Alloy Steel Chisels for carrying out demolition, excavation, mining, concrete and boulder breaking activities. Hydraulic Rock Breakers are imported and sold in fully assembled condition as well as in semi-knocked (SKD) condition and CKD (completely knocked down) condition, wherein different assemblies. sub-assemblies as mentioned in Table D1 below can be imported to form fully assembled hydraulic rock breakers.

b. The duties mentioned in column 7 of the Duty Table above for fully assembled Hydraulic Rock Breakers shall be applicable to imports of Hydraulic Rock Breakers and the Assemblies/Sub-assemblies mentioned in Table D1 only.

c. Where Alloy Steel Chisels are imported with Hydraulic Rock Breakers, anti-dumping duties applicable to Alloy Steel Chisels shall be applicable to such Alloy Steel Chisels. Anti-dumping duties for hydraulic rock breakers and its assemblies/sub-assemblies mentioned in Table D1, shall not be made applicable to alloy steel chisels or vice-versa. (Also refer point h. below)

d. The duties on hydraulic rock breakers shall be applicable only to the following assemblies/sub-assemblies and not to other parts and components of hydraulic rock breakers:

Table D1
Assemblies/sub-assemblies of hydraulic rock breakers covered under the scope of anti-dumping dutiesPictorial Representation of Component*
a. Front head
b. Back head
c. Piston for hydraulic cylinder or rock breaker
d. Cylinder body or hydraulic unit (Hydraulic body consists of front head, back head, cylinder and piston)
e. Bracket
f. Frame
g. Cylinder for hydraulic rock breaker

*The photos are for representative purposes only. The form of the actual assemblies/sub-assemblies may vary.

e. The recommended duties on assemblies/sub-assemblies shall be applicable on them irrespective of the fact that whether they are imported individually or along with other assemblies/sub-assemblies mentioned in Table D1 above.

f. It is to be ensured that exporters do not attempt to evade the recommended duties by physically combining two or more assemblies/sub-assemblies together to establish that they are exporting a different assemblies/sub-assembly other than what has been covered in Table D1 above. Further, the description of the goods being cleared should be captured adequately in terms of value and unit of measurement.

g. The duties applicable to hydraulic rock breakers shall not be applicable to any other assemblies/sub-

assemblies, part or component, or kits which have not been mentioned in Table D1 above.

#2
For Alloy Steel Chisels:

h. Alloy Steel Chisels are used along with hydraulic rock breakers. They come in various shape, size and the tip of the chisel varies according to the required end use.

i. Alloy Steel Chisels are also imported by the name of tool, wedge, toil, moil, teeth, tooth, working tool, chisel blunt, hydraulic hammer (tool), breaker tool etc. Where chisels are imported with rock breakers, anti-dumping duties applicable to chisels shall be applicable to such chisels. Anti-dumping duties applicable to alloy steel chisels shall not be made applicable to hydraulic rock breakers or its

assemblies/sub-assemblies mentioned in Table D1 above. (Also refer point b above).

2. The anti-dumping duty imposed under this notification shall be effective for a period of five years (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette, and shall be payable in Indian currency.

Explanation. - For the purposes of this notification, -

(a) rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of entry under section 46 of the said Act.

(b) “CIF value” means the assessable value as determined under section 14 of the Customs Act, 1962 (52 of 1962).

[F. No. CBIC-190354/160/2023-TO(TRU-I)]

(Vikram Vijay Wanere)
Under Secretary to the Government of India

Source: Central Board of Indirect Taxes and Customs (CBIC). View the official document.