PUBLIC NOTICE NO. 35 (RE-01)/1997-2002, Dt. 03/09/2001.
- Document type
- Circular
- Reference no.
- E
- Dated
- Category
- Public Notices w.e.f 01/04/2001
Amendments/modifications and additions in the Standard Input Output Norms.
Amendments/modifications and additions in the Standard Input Output Norms.
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl.No.A-2739, the new entries at Sl.No.A-2740 to A-2760 shall be added as per Annexure B to this Public Notice.
After the existing entry at Sl.No.C-1685, the new entries at Sl.No.C-1686 to C-1694 shall be added as per Annexure C to this Public Notice.
5. This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
( B.GANGAR)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
Annexure A to the
Public Notice No. 35
Dated: 03/09/2001
| Sl.No. | Page No. | Reference | Amendments/Corrections |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 1. | 32 | Chemicals & Allied Products Sl.No.A160 | After the description of import item at Sl. No. 13, the following additional import item (with quantity) shall be added:- 14. Chlorine - 0.560 kg. |
| 2. | 32 | Chemicals & Allied Products Sl.No.A162 | After the description of import item at Sl. No. 10, the following additional import item (with quantity) shall be added:- 11. Chlorine - 0.560 kg. |
| 3. | 3 | Chemicals & Allied Products Sl.No.A163 (amended vide Public Notice No. 19 Dated: 03/07/2000) | After the description of import item at Sl. No. 15, the following additional import item (with quantity) shall be added:-16. Chlorine - 0.500 kg. |
| 4. | 45 | Chemicals & Allied Products Sl.No.A251 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A251 | Guaifenesin | 1 kg | 1. Guaiacol | 0.75 kg |
| 2. Epichlorohydrin | 0.64 kg | |||
| OR | ||||
| 2. Alpha Glyceryl Monochlorohydrin | 0.62 kg | |||
| 5. | 45 | Chemicals & Allied Products Sl.No.A254 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A254 | Guanidine Nitrate | 1 kg | 1. Urea | 1.30 kg |
| OR | ||||
| 1. Dicyanadiamide | 0.600 kg | |||
| 2. Ammonium Nitrate | 0.700 kg | |||
| 6. | 186 | Chemicals & Allied Products Sl.No.A1539 | The description of import item at Sl. 3 shall be amended (without any change in quantity) to read as under:- 3. Meta Para Cresol |
| 7. | 200 | Chemicals & Allied Products Sl.No.A1674 | The description of import item at Sl. 1 shall be amended (without any change in quantity) to read as under:- 1. Rubber Accelerator Alkyl Phenol Disulphide/ Dipenta Methelene Thivram Tetra Sulfide |
| 8. | 254 | Chemicals & Allied Products Sl.No.A1882 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1882 | Metalaxyl Technical 94% Minimum | 1 kg | 1. N-(1-Methoxy Carbonyl Ethyl) 2,6 Dimethyl Aniline (MEDA) | 0.852 kg |
| OR | ||||
| 1. a)2,6 Dimethyl Aniline | 0.640 kg | |||
| 1. b)Methyl 2 Chloro Propionate | 0.730 kg | |||
| 1. c)Sodium Iodide | 0.060 kg | |||
| 1. d)Tetra Butyl Ammonium Bromide | 0.0165 kg | |||
| 1. e)Sodium Bicarbonate | 0.575 kg | |||
| 2. Methoxy Acetyl Chloride | 0.480 kg | |||
| OR | ||||
| 2.a)Methoxy Acetic Acid | 0.420 kg | |||
| 2. b)Thionyl Chloride | 0.600 kg | |||
| 3. Dimethyl Formamide | 0.378 kg | |||
| 4. Toluene | 0.5 kg | |||
| 5. Hexame | 0.407 kg | |||
| 6. Caustic Soda | 0.415 kg | |||
| 9. | 256-257 | Chemicals & Allied Products Sl.No.A 1913 | The norm covered by this entry shall be deleted. |
| 10. | 266 | Chemicals & Allied Products Sl.No.A1989 | The norm covered by this entry shall be deleted. |
| 11. | 23 | Chemicals & Allied Products Sl.No.A 2423 (Amended vide Public Notice No. 09 Dated: 01/05/2000) | The norm covered by this entry shall be deleted. |
| 12. | 8 | Chemicals & Allied Products Sl.No.A2446 (Amended vide Public Notice No. 25 Dated: 01/08/2000) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2446 | Polytetrafluoro Ethylene Dispension (Emulsion Grade, TFE content 59.5+/-0.5%) | 1 MT | 1. Chloroform | 4.75 MT |
| 2. Perfluoro-Octanic Acid (FC-Z6) | 0.0075 MT | |||
| 3. Anhydrous Hydro Fluoric Acid | 1.42 MT |
| 13. | 17 | Chemicals & Allied Products Sl.No.A2466 (Amended vide Public Notice No. 32 Dated: 01/09/2000) | The description of import item shall be corrected (without any change in quantity) to read as under:- 5 Amino 3 Methyl 1 Phenyl Pyrazol | ||
| 14. | 20 | Chemicals & Allied Products Sl.No.A2501 (As amended vide Public Notice No. 42 Dated: 1.12.2000) | The description of export item shall be corrected to read as under:- Lithium Bromide Solution 53% | ||
| 15. | 32 | Chemicals & Allied Products Sl.No.A2557 (Amended vide Public Notice No. 04 Dated: 31/03/2001) | The description of export item shall be corrected to read as under:- Dimethyl Lauryl Benzyl Ammonium Chloride 80% | ||
| 16. | 5-6 | Engineering Product Sl.No.C508 (Amended vide Public Notice No. 36 Dated: 03.10.2000) | 1. The description of import item at Sl. No. 1(ii) shall be amended (with quantity) to read as under:- | ||
| 1(ii)Energy Sources/Fuels(Natural Gas/LNG, NGL(condensate/ gaseous), Naphtha, Light Diesel Oil, Furnace Oil) (Only for plants having captive power plant with facilities installed for use of specific energy sources/fuels). | - | 2626330 K Cal. | |||
| 2. The description of import item at Sl. No. 1(iii) shall be amended (with quantity) to read as under:- | |||||
| 1(iii)Energy Sources/Fuels (Natural Gas/LNG, NGL (condensate/gaseous), Naphtha, High Speed Diesel Oil, Furnace Oil) (for re-heating furnaces in rolling mills, ladle heating & fundish pre-heating). | - | 565670 K. Cal. | |||
| 3. After note No. 3 under the entry, the following notes Nos. 4, 5 & 6 shall be added:- Note:- 4. Import of either one or a combination of the energy sources/fuels mentioned against S.Nos. 1(ii) & 1(iii) shall be permitted within the overall calorific value, subject to further actual user condition. Note:- 5. Quantity of specific fuel(s) in Kgs/Cubic meter/K.Ltr shall be obtained by dividing the K. Cal figure by the net calorific value/heat value of the fuel(s) as detailed below:- | |||||
| 1. Natural Gas | - | 8,400 K.Cal/Cubic Meter | |||
| 2. LNG | - | 11,436 K. Cal/Kg | |||
| 3. Naptha | - | 10,610 K. Cal/Kg | |||
| 4. NGL | - | 10,610 K. Cal/Kg | |||
| 5. LDO | - | 10,060 K. Cal/Kg | |||
| 6. F.O. | - | 9790 K. Cal/Kg | |||
| 7. HSD | - | 10,230 K. Cal./kg | |||
| Note:- 6. These norms are not applicable to DFRC Scheme as per General Note No.7 in Standard Input Output Norms Book. | |||||
| 17. | 575 | Engineering Products Sl.No.C608 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C608 | Component of Electric Teeth Plaque removing Brush: Rack Pin/Pin (Big/Small) | 1 kg | 1. S.S. Rod/Coil of relevant grade | 2 kg |
| 18. | 587 | Engineering Products Sl.No.C690 | The description of export item shall be amended to read as under:- Cryogenic Tanks for Liquidified Gases. | ||
| 19. | 3 | Engineering Products Sl. No. C- 829 (Amended vide Public Notice No. 12 Dated: 1.6.2000) | The foot note below this entry shall be deleted. | ||
| 20. | 66 | Engineering Products Sl.No.C1638 (amended vide Public Notice No. 04 Dated: 31.03.2001) | The description of import item at Sl. No.1 shall be amended (with quantity) to read as under:- | ||
| 1. Aluminium Ingot | - | 1.15 Kg. | |||
| OR | |||||
| 1. Rolled Aluminium Sheets in Coil Form | - | 1.05 Kg | |||
| 21. | 66 | Engineering Products Sl.No.C-1640 (Amended vide Public Notice No. 04 Dated: 31.03.2001) | The norm covered by this entry shall be substituted by the following:- | ||
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1640 | Fibreglass Filter Bags of different sizes with Snap Ring made of stainless steel AISI 301 and other fittings | 1 No. | 1. Fibreglass Filter Cloth of relevant GSM | 1.02 Sq.yard /Sq. yard of cloth in export product |
| 2. Fibreglass Sewing Thread | 0.023 kg | |||
| 3. Stainless Steel Strip AISI 301 | 0.025 kg |
| 22. | 873 | Plastic Products Sl.No.H-85 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-85 | Expandable Polystyrene Resin General Purpose Grade | 1 MT | 1. Styrene Monomer | 956 kgs |
| 2. Pentane (Iso + Normal) | 83.438 kgs | |||
| 3. a) Softnal 3118 (Mono Acid Diglyceride) | 1.4 kg | |||
| 3. b) Softnal 3995 (Glyceryl Mono Sterate) | 1.52 kg | |||
| 3.c) Tricalcium Phosphate | 3.598 kgs | |||
| 3. d) Adwax 165 (Bisamide Waxes) | 2.0 kgs | |||
| 3. e) Adwax 280 (N-N Ethylene Bis Steramide) | 1.0 kg | |||
| OR | ||||
| 4. a) Protective Colloid | 0.013 kg | |||
| 4. b) Benzoyl Peroxide | 0.00152 kg | |||
| 4. c) Tertiary Butyl Perbenzote | 0.00247 kg | |||
| 4. d) Hexabromide | 0.0002 kg | |||
| 4. e) Additive 451 | 0.0022 kg | |||
| 4. f) Polyethylene Wax | 0.00096 kg | |||
| 4. g) Alfa Methyl Styrene Dimmer | 0.00042 kg | |||
| 4. h) Antistatic Agent | 0.0001 kg | |||
| 4. i) Etingal A | 0.00016 kg | |||
| Note: The chemicals at Sl. 3 (a) to (e) or 4 (a) to (i) can be approved as per the applicants requirements. | ||||
| 23. | 880 | Plastic Products Sl.No.H-119 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-119 | High Impact Polystyrene Resin | 1 kg | 1. Styrene Monomer 99% | 0.9715 kg |
| 2. Polybutadiene Rubber | 0.0632 kg | |||
| 3. Plasticizer | 0.0116 kg | |||
| 4. Mineral Oil (Liquid Paraffin) | 0.0103 kg | |||
| OR | ||||
| i) Styrene Monomer | 0.9470 kg | |||
| ii) Polybutadiene Rubber | 0.8750 kg | |||
| iii) Mineral (Liquid Paraffin) | 0.0221 kg | |||
| 24. | 901 | Plastic Products Sl.No.H-230 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-230 | Polypropylene Multifilament Yarn | 100 kg | 1. Polypropylene Chips/ Granules/ Resins | 105.10 kgs |
| 2. Master Batch (Polypropylene Dyed Chips/ Relevant Colour Master Batches | 4.15 kgs | |||
| 3. U. V. Stabilizer | 0.75 kg | |||
| 4. Spin Finish Oil | 2.33 kgs |
Annexure B to the
Public Notice No.35
Dated: 03/09/2001
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|---|---|---|---|
| A2740 | Phenol Modified Rosin Ester/ Rosin Modified Phenolic Resin (Technical specification in Acid Values 25 max, softening point (R&B) 110° 120°c | 1 kg | 1. Rosin | 0.778 kg |
| 2. Fumaric Acid | 0.024 kg | |||
| 3. Dodecyl Phenol | 0.044 kg | |||
| 4. Paraformaldehyde | 0.053 kg | |||
| 5. Pentaerythritol | 0.099 kg | |||
| 6. Para Ocyl Phenol | 0.052 kg | |||
| A2741 | Gumboro D-78(1 ML) | 1 ML Vial | 1. SPF-Chicken Eggs | .19000 Nos |
| 2. Seed Virus | .00012 Nos | |||
| 3. Tryptose | .00079 Gms | |||
| 4. Gentamycin Sulphate | .00020 Gms | |||
| 5. Redox Stabilser | .00053 Ltrs. | |||
| 6. Glass Vials | 1.0800 Nos | |||
| 7. Rubber Stoppers | 1.0800 Nos | |||
| 8. Aluminium Caps | 1.0800 Nos | |||
| A2742 | Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40+2%) | 1 kg | 1. 2 Ethyl Hexyl Alcohol | 0.225 kg |
| 2. Caustic Soda Lye (45%) | 0.155 kg | |||
| A2743 | Methylol Amino Resin containing 16% sulfonated MF Resin, 51% sulfonated UF Resins and 14% Naphthalene formaldehyde Condensed product (Tysntan T-6) | 1 Tonne | 1. Naphthalene | 78.70 kgs |
| 2. Caustic Soda (solid) | 40.00 kgs | |||
| 3. Formaldehyde (37%) | 489.00 kgs | |||
| 4. Melamine | 83.20 kgs | |||
| 5. Urea | 234.00 kgs | |||
| 6. Sodium Bisulfite | 228.00 kgs | |||
| A2744 | Sodium Starch Glycolate USP-23 | 1 kg | 1. Native Potato Starch (moisture contents: 15:20%) | 1.342 kg |
| 2. Monochloro acetic acid | 0.086 kg | |||
| 3. Methyl Ethyl ketone | 1.00 kg | |||
| A2745 | 2-Amino 4, 24 Trichloro Diphenyl Ether (TADE) (Purity 99.5% Min.) | 1 kg | 1. 2,4 Dichloro Phenol | 0.862 kg |
| 2. Potassium Hydroxide | 0.367 kg | |||
| A2746 | Para Phenylene Diamine 2,5 Disulphonic Acid | 1 kg | 1. Para Phenylene Diamine | 0.500 kg |
| A2747 | 6 Nitro 2 Amino Phenol 4 Sulphonic Acid | 1 kg | 1. Ortho Amino Phenol | 0.666 kg |
| A2748 | N Acetyl N-Methyl Para Phenylene Diamine (para Amino-N-Methyl Acetanilide) | 1 kg | 1. N-Methyl Aniline | 1.06 kg |
| A2749 | Structured Phenolic Modified Rosin Ester | 1 kg | 1. Rosin | 0.680 kg |
| 2. Maleic Anhydride | 0.021 kg | |||
| 3. Para Tertiary Butylated Phenol | 0.094 kg | |||
| 4. Paraformaldehyde | 0.047 kg | |||
| 5. Bis Phenol-A | 0.007 kg | |||
| 6. Pentaerythritol | 0.114 kg | |||
| 7. Vista Oil | 0.040 kg | |||
| 8. Dimer Fatty Acid | 0.031 kg | |||
| A2750 | Polybutylene Terephthalate Compound | 1 kg | 1. Polycarbonate | 0.46 kg |
| 2. Polybutylene Terephthalate | 0.39 kg | |||
| 3. Additives (Heat Stabilizers Phosphite based, Sulfide based; Light Stabilizers Benzotriazole based; Stabilizers Phosphate based, Epoxy based; Anti Oxidants Phenolic based; Processing Aids Sterates; Flame Retardant Sulphonate based, Bromine based; Anti Dripping Agent PTFE based SB203, MBS Rubber, SVS Rubber) | 0.17 kg | |||
| 4. Pigments (Chromium Oxide, green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone Red, Oerylene Red, Perylene Red) | 0.024 kg | |||
| Note: 1.The Poly Butylene Terephthalate is based on 37% +/- 1% and Polycarbonate is based on 44% +/- 1% content. In case of any variation, the quantity shall be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each. | ||||
| A2751 | Polycarbonate Compound | 1 kg | 1. Tris (Di-butylpheneil) Phos | 0.00053 kg |
| 2. UVA 1577 {2-(4,6 diphenyl-1,3,50 Triaz in-2yl) 5-(Hexy) oxyl-Phenol} | 0.04725 kg | |||
| 3. Polycarbonate Powder | 1.00219 kg | |||
| 4. Colorants (Relevant) | 0.00003 kg | |||
| OR | ||||
| 1. Polycarbonate Resin | 1.0430 kg | |||
| 2. Additives (Heat Stabilizers Phosphite based,Light Stabilizers Benzotriazole based; Stabilizers Epoxy based, Phosphite based; Anti Oxidants Phenolic based; Processing Aids Silicone Oil, Sterates; Flame Retardant Phosphate based, Sulphonate based, Bromine based; Anti Dripping Agent PTFE based) | 0.0047 kg | |||
| 3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiophene Brightner, Anthraquinone Violet/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone Red, Antrapyridone Red Dye, Thio Indigo Dye Compound, Phtalprinone Red Dye, Imide Derivatives) | 0.0018 kg | |||
| OR | ||||
| 1. TNPP (Tris(nonyl Phenol) Phosphite) | 0.00105 kg | |||
| 2. Tinuvin 234 {2-(2H-Benz-Otriazol-2-yl) 4-6, Bis (1-Methyl-1-Phenylethyl) Phenol) | 0.10500 kg | |||
| 3. Polycarbonate Powder | 0.94374 kg | |||
| 4. Colorant (Relevant) | 0.00021 kg | |||
| Note: 1.The Polycarbonate Compound is based on 99.5% +/- 0.5% Polycarbonate Resin content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2.Combination of various additives and Pigments is to be permitted within the quantities indicated against each. | ||||
| A2752 | Glass Reinforced Polybutylene Terephthalate Compound | 1 kg | 1. Polybutylene Terephthalate | 0.597 kg |
| 2. Additives (Stabilizers Sulfide based, Phosphite based, Epoxy based, Phosphate based; Light Stabilizers Benzotriazole based; Anti Oxidants Phenolic based; Processing Aids- Sterates; Flame Retardant Sulphonate based/ Bromine based; Anti Dripping Agent PTFE based SB203) | 0.21 kg | |||
| 3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone Violet/ Green/ Yellow/Red, Solvent Red; Phtalocyanine Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone Red, Perylene Red, Methine Orange Dye, Anthrapyridone Red Dye, Thio Indigo Dye Compound, Phtaloprinone Red Dye, Imide Derivatives) | 0.019 kg | |||
| 4. Glass Fibre | 0.224 kg | |||
| Note: 1.The Poly Butylene Terephthalate is based on 57% +/- 1% and Additives are based on 20% +/- 1% content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each. | ||||
| A2753 | Glass Reinforced Modified Poly Phenylene Oxide (PPO) Compound | 1 kg | 1. Poly Phenylene Oxide (PPO) | 0.310 kg |
| 2. Additives (Heat Stabilizers Sulfide based; Light Stabilizers Benzotriazole based; Anti Oxidants Phenolic based, Epoxy based Stabilizers; Processing Aids Sterates; Flame Retardant Phosphate/ Sulphonate based; MBS Rubber, SBS Rubber) | 0.042 kg | |||
| 3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone Violet/ Green/ Yellow/ Red, Solvent Red; Phtalocyanine Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone Red, Perylene Red, Methine Orange Dye, Anthrapyridone Red Dye, Thio Indigo Dye Compound, Phtaloprinone Red Dye, Imide Derivatives) | 0.010 kg | |||
| 4. Glass Fibre | 0.210 kg | |||
| 5. High Impact Polystyrene | 0.480 kg | |||
| Note: 1. The export product input quantities have been worked out with Poly Phenylene Oxide 30% +/- 1%, High Impact Polystyrene 45% +/- 1% and Glass Fibre 20% +/- 1% content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each. | ||||
| A2754 | Glass Reinforced Polycarbonate Compound | 1 kg | 1. Polycarbonate Resin | 0.898 kg |
| 2. Additives (Stabilizers Sulfide based, Phosphite based; Light Stabilizers Benzotriazole based; Stabilisers Epoxy based, Phosphate based; Processing Aids Silicone Oil, Sterates; Flame Retardant Phosphite based, Bromine based; Anti Dripping Agent PTFE based SB203) | 0.026 kg | |||
| 3. Pigments (Carbon Black, Titanium Dioxide) | 0.009 kg | |||
| 4. Glass Fibre | 0.117 kg | |||
| Note: 1. The Polycarbonate Compound is based on 85% +/- 1% Polycarbonate Resin content and 11% +/- 1% Glass Fibre content. In case of any variation, quantities will be calculated on pro-rata basis. Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each. | ||||
| A2755 | Liquid Printing Ink P.U. Based in Black Colour (For Food Grade Packaging) Pigment content Minimum 10.5% Solid P.U. Resin content Minimum 11.4% | 1 MT | 1. Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone | 719.30 kgs |
| 2. Polyol | 86.26 kgs | |||
| 3. Di-Isocyanate | 18.80 kgs | |||
| 4. Ink Additives | 84.06 kgs | |||
| 5. Pigment Carbon Black | 105.00 kgs | |||
| A2756 | Liquid printing Ink P.U. Based in White colour (For Food Grade Packaging) Pigment content Minimum 27.8% Solid P.U. Resin content Minimum 9.6% | 1 MT | 1. Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone, Ethyl Acetate | 619.30 kgs |
| 2. Polyol | 72.30 kgs | |||
| 3. Di-Isocyanate | 15.80 kgs | |||
| 4. Ink Additives | 30.41 kg | |||
| 5. Titanium Dioxide | 278.00 kgs | |||
| A2757 | Para Phenylene Diamine 2,5 Disulphonic Acid | 1 kg | 1. Para Phenylene Diamine | 0.500 kg |
| A2758 | Polyamide Sheet reinforced Flat Belt Made out of Nitrile Rubber Compound | 1 kg | 1. Synthetic Rubber (Nitrile) | 0.49 kg/kg of the Rubber compound content in export |
| 2. Plasticizer (Thiakol) | 0.058 kg/kg of the Rubber compound content in export | |||
| 3. Processing Aids (A C Polyethylene, Polythylene Glycol 4000) | 0.01 kg/kg of the Rubber compound content in export | |||
| 4. Nylon Yarn 6 Industrial Grade (410+/- 10 Denier) | 1.05 kg/kg content of Nylon fabric | |||
| 5. Polyamide Granules (Ultramid 1c & Ultramid 6a natural) | 0.003 kg/kg content in export product | |||
| 6. Polyamide Sheets | 1.050 kg/kg content in export product | |||
| 7. Bonding Agent (Resorcinol) | 0.015 kg | |||
| A2759 | Nylon Fabric with Grooved Black Rubber made out of Nitrile Rubber Compound | 1 kg | 1. Synthetic Nitrile Rubber | 0.525 kg/kg of the Rubber Compound content in the export product |
| 2. Thiakol Plasticiser | 0.0735 kg/kg of the Rubber Compound content in the export product | |||
| 3. Processing Aid (A C Polyethylene Glycol 4000) | 0.0105 kg/kg of the Rubber Compound content in the export product | |||
| 4. Nylon 6 Yarn Industrial Grade (410 +/- 10 Denier) | 1.10 kg/kg of Nylon Fabric in export product | |||
| A2760 | Polyanionic Cellulose (containing 85% of Sodium Carboxy Methyl Cellulose) | 1 kg | 1. Acetic Acid | 0.285 kg |
| 2. Acetic Anhydride | 0.034 kg | |||
| 3. Soda Ash | 0.207 kg | |||
| 4. Caustic Soda Flakes | 0.170 kg | |||
Annexure C to the
Public Notice No.35
Dated: 03/09/2001
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
|---|---|---|---|---|
| C1686 | Mineral Insulated Resistance Temperature Detector (RTD) Assembly | 1 No. | 1. RTD Element of relevant specification | 1 No. |
| C1687 | Tungsten Contact having 55% +/- 2% Tungsten by weight | 1 kg | 1. Tungsten Rod | 0.95 kg |
| 2. Abrasive Wheel | 3 Nos. | |||
| C1688 | Twin Type Shaving System-Disposable Razer Blade-3 fixed with Lubra | 1 Million pieces | 1. CRSS Strips | 735 kg |
| 2. ABS | 10518 kg | |||
| 3. Aluminium Strips | 63.65 kg | |||
| 4. TP Elastomer | 3605 kg | |||
| 5. GP Polystyrene | 1304 kg | |||
| 6. Polyox Coagulant | 44 kg | |||
| 7. Polyox VSRN 750 | 44 kg | |||
| 8. GP Polystrene | 38 kg | |||
| 9. Polyterafluoro-ethylene | 0.9 kg | |||
| 10. Grinding Wheel | 3 Pcs. | |||
| 11. Slitting Sheel | 6 Pcs. | |||
| Note:- The CIF value of item of imports at Sl. No. 9, 10 and 11 taken together should not exceed 1% of FOB value of export. | ||||
| C1689 | Monocular/ Binocular Microscope | 1000 Nos. | 1. Halogen Lamp (6 V or 12 V 20 W or 30 W) | 1000 Nos. |
| 2. Stainless Steel Hard Wire 1.60 mm | 32 Kgs. | |||
| 3. Stainless Steel Hard Wire 1.00 mm | 32 Kgs. | |||
| 4. Stainless Steel Hard Wire 4.00 mm | 32 Kgs. | |||
| 5. Step down transformer/ power supply Unit input 120 V or 240 V output 6 V or 12 V | 1000 Nos. | |||
| 6. Power Cord with Plug | 1000 Nos. | |||
| 7. On-Off switch | 1000 Nos. | |||
| 8. Relevant Achromatic objective lens | 1000 Nos. | |||
| 9. Lamp Holder | 1000 Nos. | |||
| 10. Socket with fuse | 1000 Nos. | |||
| 11. Polyurethane Paint/ Grease | Upto 2% of FOB Value | |||
| C1690 | Drive Shaft Assembly, Front Wheel Drive LH/RH without ABS Ring | 1 Pair | 1. C/V Joint Boot Seal | 2 Nos. |
| 2. T/P Boot Seal | 2 Nos. | |||
| 3. Clamps | 6 Nos. | |||
| 4. Molykote VN-2461 C Lithium Grease | 0.25 Kg. | |||
| 5. CV Joint Grease | 0.25 Kg. | |||
| 6. Shaft Ring | 2 Nos. | |||
| 7. T/P Housing Blank | 2 Nos. | |||
| 8. C/V Outer Race Blank | 2 Nos. | |||
| 9. Spider Tripot Joint | 2 Nos. | |||
| 10. C/V Inner Race | 2 Nos. | |||
| C1691 | Drive Shaft Assembly, Front Wheel Drive LH/RH with ABS Ring | 1 Pair | 1. C/V Joint Boot Seal | 2 Nos. |
| 2. T/P Boot Seal | 2 Nos. | |||
| 3. Clamps | 6 Nos. | |||
| 4. Molykote VN-2461 C Lithium Grease | 0.25 Kg. | |||
| 5. CV Joint Grease | 0.25 Kg. | |||
| 6. Shaft Ring | 2 Nos. | |||
| 7. T/P Housing Blank | 2 Nos. | |||
| 8. C/V Outer Race Blank | 2 Nos. | |||
| 9. Spider Tripot Joint | 2 Nos. | |||
| 10. C/V Inner Race | 2 Nos. | |||
| 11. ABS Ring | 2 Nos. | |||
| C1692 | Stainless Steel LPG Stove with/ without auto Ignition | 1 No. | 1. Stainless Steel Sheet/ Coil of relevant grade | 1.15 Kg/ Kg content in the export product |
| 2. Gas Valves with/ without Ignition Unit | Net to Net with accoun-tability | |||
| 3. Brass Honey Scrap | 1.06 Kg/Kg content in export product | |||
| Note:- If the product is exported without Auto Ignition Unit, the import item No. 2 viz. Gas Valve shall be allowed without Ignition Unit. | ||||
| C1693 | Hot Forged Steel nuts | 1 No. | 1. Forged Blank Nut without thread of Relevant grade of alloy/ non alloy steel and relevant size | 1 No. |
| C1694 | Copper Bonded Ground Rods UL approved (0.01 Inches copper coating) | 1 Kg | 1. M. S. Bright Bars/ Wire Rods | 0.97 kg |
| 2. Copper Bar/ Cathodes/ Wire Bars | 0.08 kg | |||