Circular

PN No. 49/(RE-2000)/1997-2002 Dated 1-1-2001

Document type: Circular
Reference no.: D
Dated: 25 Apr 2012
Category: Public Notices w.e.f 01/04/2000

Input - Output Norms Further Added/ Amended

PUBLIC NOTICE NO.49(RE-2000)/1997-2002, Dt. 01/01/2001.

Input - Output Norms Further Added/ Amended

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A to this Public Notice shall be made.
In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-2515, the new entries from Sl.No.A-2516 to A-2525 shall be added as per Annexure B to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1577, the new entries from Sl.No.C-1578 to A-1582 shall be added as per Annexure C to this Public Notice.

FOOD PRODUCTS

After the existing entry at Sl.No.E-89, the new entries Sl.No.E-90 to E-93 shall be added as per Annexure D to this Public Notice.

PLASTIC PRODUCTS

After the existing entry at Sl.No.H-434, the new entry Sl.No.H-435 shall be added as per Annexure E to this Public Notice.

This issues in public interest.

Sd/-
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE

(S. L. GUPTA)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure A to the
Public Notice No.49
Dated: 01/01/2001

AMENDMENTS/CORRECTIONS

Sl. No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	18-19	Chemicals & Allied Products Sl.No.A79	The description of export item shall be amended to read as under:- Atenolol BP/USP.
2.	32-33	Chemicals & Allied Products Sl.No.A163	The description of import item at Sl. No. 15 (with quantity) shall be amended to read as under:- 15. Phosphorous - 0.700 kg Trichloride OR Yellow/White - 0.16 kg. Phosphorous
3.	170	Chemicals & Allied Products Sl.No.A1371	The quantity of import item at Sl. No. 1 shall be amended to read as under:- 1.580 kg.
4.	288	Chemicals & Allied Products Sl.No.A2150	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2150	Dimethyl Amino Ethyl Chloride Hydrochloride	1 kg	1. Dimethyl Amino Ethanol 2. Thionyl Chloride 3. Ethylene Dichloride	0.687 kg 0.913 kg 0.50 kg

5.	294	Chemicals & Allied Products Sl.No.A2205	The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- Bleached Soft Wood Pulp The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:- 4. 0.079 kg 5. 0.007 kg.
6.	295	Chemicals & Allied Products Sl.No.A2206	The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- Bleached Soft Wood Pulp The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:- 4. 0.103 kg 5. 0.009 kg.
7.	295	Chemicals & Allied Products Sl.No.A2207	The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- Bleached Soft Wood Pulp The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:- 4. 0.055 kg 5. 0.005 kg.
8.	295 - 296	Chemicals & Allied Products Sl.No.A2208	The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- Bleached Soft Wood Pulp The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:- 4. 0.071 kg 5. 0.006 kg.
9.	10	Electronics Products Sl. No. B-131 Introduced Vide Public Notice No. 38 Dated: 01/11/2000	The Note below this entry shall be deleted.
10.	601	Engineering Product Sl.No.C791	The description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:- 1. Stainless Steel Bars/ - 2.0 MT Billets/Blooms.
11.	813-815	Leather Products Sl.No.G-3	After the Note No. 1 the following Note shall be added below this norm:- Note2:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 2.95 sq.ft. if item at sl.no. 1(a) & (b) are not asked for, (ii) 2.65 sq.ft. per pair if item at sl.no. 1(a) is not asked for, (iii) 1.7 sq.ft. per pair if item at sl.no. 1(b) is not asked for and (iv) 1.4 sq.ft. per pair if item at sl.no.1(a) &1 (b) are not asked for.
12.	816	Leather Products Sl.No.G-6	The following Note No. 1 shall be added below this norm:- Note1: The average consumption of finished leather for ladies hand gloves will be 2 sq.ft./pair and that of gents 2.5 sq.ft./pair..
13.	819-820	Leather Products Sl.No.G-8	The following Note No. 1 shall be added below this norm:- Note1:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 8 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft. if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) & (b) is asked for..
14.	820-822	Leather Products Sl.No.G-9	After the Note No. 1 the following Note shall be added below this norm:- Note2:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 8 sq.ft. if item 1(a) & 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft. if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) & (b) are asked for.
15.	822-823	Leather Products Sl.No.G-10	After the Note No. 1 the following Note shall be added below this norm:- Note2:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 10 sq.ft. if item 1(a) & 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for, (iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a) & (b) are asked for.
16.	824	Leather Products Sl.No.G-11	The following Note No. 1 shall be added below this norm:- Note1:- Requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather products, shall be worked out taking into account the area of Finished Leather as 1.5 Sq. ft/pair of Gents Leather Sandle Upper..
17.	824-825	Leather Products Sl.No.G-12	After the Note No. 2 the following Note shall be added below this norm:- Note3:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required is 1.5 sq.ft. per pair..
18.	825-826	Leather Products Sl.No.G-13	The following Note No. 1 shall be added below this norm:- Note1:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft. if item 1(a) is not asked for, (iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) & (b) is asked for..
19.	826-828	Leather Products Sl.No.G-14	After the Note No. 1 the following Note shall be added below this norm:- Note2:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft. if item 1(a) is not asked for, (iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) & (b) is asked for..
20.	828-829	Leather Products Sl.No.G-15	The following Note No. 1 shall be added below this norm:- Note1:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 10 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for, (iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a) & (b) is asked for..
21.	831-832	Leather Products Sl.No.G-22	The following Note No. 1 shall be added below this norm:- Note1:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 3.65 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.25 sq.ft. if item 1(b) is not asked for, (iii) 2.15 sq.ft. if item 1(c) not asked for, and (iv) 1.75 sq.ft. if 1(a) & (c) are asked for..
22.	840-841	Leather Products Sl.No.G-29	The following Note No. 1 shall be added below this norm:- Note1:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per pair is (i) 9.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9 sq.ft. if item 1(a) is not asked for, (iii) 5.15 sq.ft. if item 1(b) is not asked for, and (iv) 4.75 sq.ft. if 1(a) & (b) are asked for..
23.	844	Leather Products Sl.No.G-35	The following Note No. 1 shall be added below this norm:- Note1:- For requirement of processing Chemicals as per Note 7 under the General Notes for Leather and Leather Products, finished leather required per glove is 1.2 sq.ft...
24.	943	Plastics Product Sl.No.H-410	The description of export item shall be amended to read as under:- PVC Lace Table Mats/Coasters/Doileys.
25.	17	Miscellaneous Product Sl.No.K-126 Vide Public Notice No. 19 Dated: 03/07/2000	The norm covered by this entry shall be deleted from Miscellaneous Product Group and this entry has been shifted to Food Products Group with prior import condition.

Annexure B to the
Public Notice No.49
Dated: 01/01/2001

CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2516	Metoclopramide HCL BP	1 kg	1. Meta Amino Phenol 2. Potassium Carbonate 3. N,N, Diethyl Ethylene Diamine 4. Dimethyl Formamide	1.73 kg 3.21 kg 0.51 kg 0.49 kg
A 2517	Triclosan Oral Grade conforming to the following specifications:- 2,3,7,8 Tetra Chloro Dibenzofuran<1ppt, 2,3,7,8 Tetra Chloro Dibenzo-p- dioxin<1ppt, 2,4,4 Trichloro-2-Nitro Diphenyl Ether<0.01%, 2,4,4 Trichloro-2-Amino Diphenyl Ether<0.01%.	1 kg	1. 2,4 Dichloro Phenol 2. Perchloro Ethylene 3. Sodium Nitrite 4. Isopropyl Alcohol	3.00 kg 10.00 kg 0.63 kg 5.00 kg
A2518	Fenvalerate 20% EC	1 kg	1. Fenvalerate Tech. 90% 2. Solvent C-9	0.227 kg 0.688 kg
A2519	Prepared adhesives based on Plastics (Two component Laminating Adhesives) Adhesive (Polyu-rethane solution containing 60% resin content and 40% solvent) Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent)	1 kg 1 kg	1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant)	0.094 kg 0.270 kg 0.050 kg 0.204 kg 0.016 kg 0.035 kg 0.400 kg 0.012 kg 0.037 kg 0.032 kg 0.060 kg 0.002 kg 0.372 kg 0.500 kg
A2520	Prepared adhesives based on Plastics (Two components Laminating Adhesives) Adhesive (Polyu-rethane solution containing 66% resin content and 34% solvent) Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent)	1 kg 1 kg	1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant)	0.103 kg 0.297 kg 0.055 kg 0.224 kg 0.018 kg 0.038 kg 0.340 kg 0.012 kg 0.037 kg 0.032 kg 0.060 kg 0.002 kg 0.372 kg 0.500 kg
A2521	Prepared adhesives based on Plastics (Two components Laminating Adhesives) Adhesive (Polyu-rethane solution containing 25% resin content and 75% solvent) Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent)	1 kg 1 kg	1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant)	0.039 kg 0.113 kg 0.021 kg 0.085 kg 0.007 kg 0.015 kg 0.750 kg 0.012 kg 0.037 kg 0.032 kg 0.060 kg 0.002 kg 0.372 kg 0.500 kg
A2522	Paranitro benzyl bromide, 99% min. purity	1 kg	1. Paranitrotoluene 2. Liquid Bromine 3. Carbon Tetrachloride 4. Methanol	1.300 kg 1.300 kg 0.900 kg 1 kg
A2523	Nylon Tyre Yarn (Nylon-6)	1 MT	1. Nylon Chips (Nylon-6) 2. Spin Finish Oil 3. Cuprous Iodide 4. Tetra Methyl Thiuram Disulphide (TT)	1.078 MT 32.25 kg 0.44 kg 0.107 kg
A2524	Ethyl 2, Methyl 3, 4 Penta dianoate	1 kg	1. Tri-ethyl orth propionate 2. Propargyl Alcohol	1.782 kg 0.549 kg
A2525	PVC Shower curtains	1 kg	1. Relevant PVC Film	1.06 kg/kg content in the export product

Annexure C to the
Public Notice No.49
Dated: 01/01/2001

ENGINEERING PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty Allowed
C1578	Fire Clay Bricks/Shapes	1 MT	1. Calcined Clay 2. Non-Plastic Clay 3. Ball Clay 4. SRM-30 (Calcined Alumina)	0.752 MT 0.220 MT 0.055 MT 0.035 MT
C1579	Iron Nickel Alloy wire of different composition	1 kg	1. Nickel Pellets	1.03 kg/kg of Nickel in the export product
C1580	Nickel Chrome Alloy wire of different composition	1 kg	1. Nickel Pellets 2. Electrolytic Chromium Metal Flake	1.03 kg/kg of Nickel in the export product 1.03 kg/kg content in the export product
C1581	Nickel Copper Alloy wire of different composition	1 kg	1. Nickel Pellets 2. Copper Ingot	1.03 kg/kg of Nickel in the export product 1.03 kg/kg of Copper in the export product
C1582	High Speed Steel broaches (cutting tools), Cobalt & Non- Cobalt grade	1 kg	1. Relevant High Speed Steel (Cobalt/Non- Cobalt grade)	1.45 kg/kg content in the export product

Annexure D to the
Public Notice No.49
Dated: 01/01/2001

FOOD PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty Allowed
E90	Processed Black Pepper (Non- Srilankan) (with minimum 2% volatile oil content)	1 MT	Unprocessed Black Pepper (non-Srilankan) with extraneous matter less than 2% and minimum 2% volatile oil content.	1.02 MT
Note: Export of this item shall be permitted only after import of unprocessed Black Pepper of said specification.
E91	Hand made Beedies	1 carton	1. Relevant Cartons	Net +1% wastage
E92	Ground Nut Kernels	1 kg	1. Raw Jute 2. Relevant LDPE/ HDPE/ PP Granules	1.05 kg/kg content in the export product packaging 1.05 kg/kg content in the export product packaging
E93	Natural Sesame Seeds	1 kg	1. Raw Jute 2. Relevant LDPE/ HDPE/ PP Granules	1.05 kg/kg content in the export product packaging 1.05 kg/kg content in the export product packaging

Annexure E to the
Public Notice No.49
Dated: 01/01/2001

PLASTIC PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty Allowed
H435	Epoxite Novalac Resin Powder (Softening Point-110+5°C	1 MT	1. Bisphenol-A	0.91 MT

PN No. 49/(RE-2000)/1997-2002 Dated 1-1-2001

Related Content

In This Category