Ensuring adherence of Indian Standard of respective Input material of Steel and Steel Products intended for import which are notified in QCO and requires mandatory registration on SIMS portal
Instruction No. 16/2025-Customs
F. No.401/24/2025-Cus.Ill
Government of India
Ministry of Finance,
Department of Revenue
(Central Board of Indirect Taxes & Customs)
********
Room No. 229A, North Bloack, New Delhi
Dated 18th June, 2025
To
All Principal Chief Commissioners / Chief Commissioners of Customs/ Customs (Preventive) / Customs & Central Taxes.
All Principal Commissioners / Commissioners of Customs / Customs (Preventive).
All Pr. Director General/Director Generals under CBIC.
Subject: Ensuring adherence of Indian Standard of respective Input material of Steel and Steel Products intended for import which are notified in QCO and requires mandatory registration on SIMS portal - reg.
Madam/Sir,
Reference is invited to the Order dated 13.06.2025 issued by the Deputy Secretary, Ministry of Steel vide F.no. S-20011/15/2024-TECH on the above subject (copy attached).
2. Vide the above order dated 13.06.2025, it has been stated that presently 151 Indian Standards, covering steel and steel products of chapter 72 and 73 of ITC(HS) codes, are incorporated in the Steel and Steel Products (Quality Control) Order, 2024 (QCO) notified vide S.O 3716(E) dated 29.08.2024. In connection to compliance with QCO, adherence of Indian Standard of respective input material, which are also part of the QCO, shall be ensured. In respect of steel and steel products defined under aforesaid Indian Standards, respective Indian Standard(s) of input material is mapped (copy attached). This will be effective for the imports having Bill of Lading dated on or after 16th June 2025.
3. It is requested that necessary action may be taken to sensitize officers under your jurisdiction regarding the said matter.
4. The difficulties, if any, may be brought to the notice of the Board.
Hindi version follows.
Yours faithfully,
Encls: as above.
(Neeraj Goyal)
OSD (Cus-III)
Email: uscus.3-dor@gov.in
Copy to: - (for information and necessary action)
1. The Webmaster, CBIC.
401/24/2025-Cus.III I/117188/2025
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
IS 1785
(Part-1): 1983
Specification for plain Hard- drawn Steel Wire
for Pre-stressed Concrete; Part 1 Cold -
Drawn Stress relieved Wire.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
IS 1785
(Part-2): 1983
Plain Hard-drawn Steel Wire for Pre-stressed
Concrete; Part 2 as Drawn Wire.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
3 IS 6003: 2010
Indented Wire for Pre-stressed Concrete –
Specification.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
4 IS 6006: 2014
Uncoated Stress Relieved Strand for
Pre-stressed Concrete – Specification.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
IS 13620:
1993
Fusion Bonded Epoxy Coated Reinforcing
Bars – Specification.
1 IS 1786: 2008
High strength deformed steel bars and wires for concrete reinforcement- Specification except for High strength deformed steel bars and wires of sizes less than 8 mm.
IS 14268:
2022
Uncoated Stress Relieved Low Relaxation
Seven- wire (Ply) Strand for Pre-stressed
Concrete – Specification.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
7 IS 277: 2018
Galvanized Steel Sheets (Plain and
Corrugated) – Specification.
5 IS 513 (Part 1): 2016
Cold reduced carbon steel sheets and strip:
Part 1 Cold Forming and Drawing Purpose.
IS 513 (Part 2): 2016
Cold reduced low carbon steel sheets and strip:
Part 2 High Tensile and Multi- phase Steel.
IS 1079: 2017 Hot Rolled Carbon Steel Sheet, Plate and Strip. IS 2062 :2011
Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). IS 5986 :2017 Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes.
8 IS 2002 : 2024
Steel plates for pressure vessels for
intermediate and high temperature service
including boilers.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
9 IS 2041 : 2024
Steel Plates for Pressure Vessels Used at
Moderate and Low Temperature –
Specification.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
10 IS 1786: 2008
High strength deformed steel bars and wires
for concrete reinforcement- Specification
except for High strength deformed steel bars
and wires of sizes less than 8 mm.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
11 IS 648: 2022
Cold rolled non-oriented electrical steel
sheet and strip - Fully processed type-
Specification.
1 IS 18316 : 2023
Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed Non- Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel 12 IS 3024: 2015
Grain Oriented Electrical Steel Sheet and
Strip.
NA Not applicable Not applicable
IS 15391:
2003
Cold Rolled Non-Oriented Electrical Steel
Sheet and Strip – Semi-Processed Type-
Specification.
1 IS 18316 : 2023
Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel 14 IS 1875: 1992
Carbon steel billets, blooms, slabs and bars
for forgings.
| NA Not applicable Not applicable | ||
| 15 IS 3502: 2009 Steel Chequered Plates. | 1 | IS 14650: 2023 |
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
16 IS 2062: 2011
Hot rolled medium and high tensile structural
steel except for bars and rods of diameter or
thickness less than 6 mm and structurals
below (50 mm x 50 mm x 6 mm).
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
17 IS 432 (Part 1): 1982
Specification for Mild Steel and Medium
Tensile Steel Bars and Hard–Drawn Steel
Wire for Concrete Reinforcement:
Part 1 Mild steel and medium tensile steel
bars.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
18 IS 432 (Part 2): 1982
Specification for Mild steel and Medium
Tensile steel bars and Hard–Drawn Steel Wire
for Concrete Reinforcement: Part 2
Hard-Drawn Steel Wire.
1 IS 7887: 1992 Mild steel wire rods for general engineering purposes.
IS 513 (Part
1): 2016
Cold reduced carbon steel sheets and strip:
Part 1 Cold Forming and Drawing Purpose.
1 IS 11513: 2017 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes.
IS 513
(Part 2): 2016
Cold reduced low carbon steel sheets and
strip:
Part 2 High Tensile and Multi- phase Steel.
1 IS 11513: 2017 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes.
21 IS 1079: 2017
Hot Rolled Carbon Steel Sheet, Plate and
Strip.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
22 IS 2879: 1998 Mild steel for metal arc welding electrodes. 1 IS 2879: 1998 (for wire rod and
bar)
Mild steel for metal arc welding electrodes.
23 IS 5872: 2025 Steel strapping for packaging 3 For grade 2 & 3 in hot rolled
condition -
a)IS 1079: 2017 &
b) IS 11513: 2017
a)Hot rolled carbon steel sheet, plate and strip - Specification b)Hot rolled carbon steel strip for cold rolling purposes - Specification For grade 2 & 3 in cold rolled
condition -
a) IS 513 (part 1 ): 2016
a)Cold reduced carbon steel sheet and strip: Part 1 Cold forming and drawing purpose For grade 1 & 4 in hot rolled and
cold rolled condition - Not
applicable
24 IS 5986: 2017
Hot Rolled Steel Sheet, Plate and Strip for
Forming and Flanging purposes.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
25 IS 6240: 2008
Hot Rolled Steel Plate (up to 6 mm) Sheet
and Strip for the Manufacture of
Low-Pressure Liquefiable Gas Cylinders.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
26 IS 7283: 1992
Hot Rolled bars for production of bright bars
and machined parts for engineering
applications.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
27 IS 7887: 1992
Mild steel wire rods for general engineering
purposes.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 10748:
2004
Hot Rolled Steel Strip for Welded Tubes and
Pipes.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 11513:
2017
Hot Rolled Carbon Steel Strip for Cold Rolling
Purposes.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
IS 15647:
2006
Hot rolled steel narrow width strip for
welded tubes and pipes.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
31 IS 7904: 2018 High Carbon Steel Wire Rods – Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
32 IS 14246 : 2024
Continuously pre-painted galvanized steel
sheets and coils.
1 IS 277: 2018 Galvanized Steel Sheets (Plain and Corrugated) – Specification.
IS 15965:
2012
Pre–painted aluminium zinc alloy metallic
coated steel strip and sheet (plain).
1 IS 15961: 2012 Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain).
34 IS 280: 2006
Mild steel wire for General Engineering
purposes.
1 IS 7887: 1992 Mild steel wire rods for general engineering purposes.
35 IS 1835: 1976 Round steel wire for ropes. 1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
36 IS 3975: 1999
Low carbon Galvanized steel wires, formed
wires and Tapes for armouring of cables.
1 IS 7887: 1992 Mild steel wire rods for general engineering purposes.
37 IS 4368: 1967
Alloy Steel billets, blooms and slabs for
forging for general engineering purposes.
NA Not applicable Not applicable
IS 4454
(Part 1): 2001
Steel wires for mechanical springs, Part 1
cold drawn unalloyed steel wire.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
IS 4454
(Part 2): 2001
Steel wire for mechanical springs Part 2: oil
hardened and tempered steel wire.
2 IS 7904: 2018 High Carbon Steel Wire Rods – Specification. IS 5517: 1993 Steel for hardening and tempering –Specification.
40 IS 4824: 2022 Bead Wires for Tyres. 1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
IS 11169
(Part 1): 2022
Steels for Cold Heading/ Cold extrusion
application
Part-1 Wrought carbon and low alloy steels.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 11587:
1986
Structural Weather resistant steel. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 15103:
2002
Fire resistant steel – Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 15914:
2011
High Tensile Strength Flat Rolled Steel Plate
(Up To 6 mm), Sheet and Strip for the
Manufacture of Welded Gas Cylinder.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
45 IS 15961: 2012
Hot Dip aluminium – Zinc alloy metallic
coated steel strip and sheet (plain).
IS 513 (Part
1): 2016
Cold reduced carbon steel sheets
and strip: Part 1 Cold Forming and
Drawing Purpose
IS 513
(Part 2): 2016
Cold reduced low carbon steel sheets and strip: Part 2 High Tensile and Multiphase Steel.
IS 15962:
2012
Structural Steel for Building for Structures
with improved seismic Resistance.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
| 47 IS 6528 :1995 Stainless Steel Wires. 1 | IS 6603 : 2024 Stainless Steel Bars and Flats. |
| 48 IS 6603 : 2024 Stainless Steel Bars and Flats. | 2 IS 14650: 2023 |
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 6529: 1996 Stainless Steel Blooms Billets and Slabs for Forging.
49 IS 5522: 2014
Stainless steel sheets and strips for utensils –
Specification.
3 IS 14650: 2023 (for hot Rolled)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 5522: 2014 (for cold Rolled) Stainless steel sheets and strips for utensils – Specification. IS 6911 : 2017(for cold Rolled) Stainless steel plate, sheet and strip – Specification.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
50 IS 6911: 2017
Stainless steel plate, sheet and strip –
Specification.
2 IS 14650: 2023 (for hot Rolled)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 6911 : 2017 (for cold rolled) Stainless steel plate, sheet and strip – Specification.
IS 15997:
2012
Low Nickel Austenitic Stainless- Steel Sheet
and Strip for Utensils and Kitchen Appliances
– Specification.
3 IS 14650: 2023 (for hot Rolled)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 6911 : 2017 (for cold rolled) Stainless steel plate, sheet and strip – Specification. IS 15997: 2012 (for cold rolled)
Low Nickel Austenitic StainlessSteel Sheet and Strip for Utensils and Kitchen Appliances – Specification.
| 52 IS 1110 : 2023 Ferrosilicon – Specification. | NA | Not applicable | Not applicable |
| 53 IS 4409: 2023 Specification for Ferronickel. | NA | Not applicable | Not applicable |
54 IS 1029: 1970
Specification for Hot rolled steel strip
(bailing).
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
55 IS 2385: 1977
Specification for Hot-rolled mild steel sheet
and strip in coil form for cold-reduced
tinplate and cold-reduced black plate.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
56 IS 3039 : 2024
Structural Steel for Ship
Construction-Specification
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
57 IS 9550 : 2024 Bright Steel Bars - Specification 11 IS 7283 Hot Rolled bars for production of bright bars and machined parts for engineering applications.
IS 5517: 1993 Steel for hardening and tempering –Specification. IS 4431: 1978 Specification for Carbon and Carbon-Manganese Free-Cutting Steels. IS 3930 Flame and Induction Hardening Steels – Specification. IS 3431
Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.
IS 3195
Steel For the Manufacture of Volute and Helical Springs (for Railway Rolling Stock) – Specification.
IS 4432 Specification for Case Hardening Steels.
IS 11947 Soft Magnetic Iron Rods, Bars, Flats and Sections. IS 3298 Specification for Mild Steel Rivet Bars for Ship Building. IS 14698
Carbon and Low Alloy Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used in Defence Services - Specification.
IS 7494 Specification for Steel for valves for Internal Combustion Engines
58 IS 3748: 2022 Tool Steels – Specification. 3 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings.
NIL FOR POWDER METALLURGY
IS 3748 :2022 (for cold drawn and
cold rolled products)
Tool Steels – Specification.
59 IS 5517: 1993
Steel for hardening and tempering
–Specification.
2 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings.
60 IS 7494 : 2023
Specification for Steel for valves for Internal
Combustion Engines
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
IS 12146:
1987
Specification for Carbon manganese steel
forgings for pressure vessels.
1 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings.
62 IS 16585:2023
Magnetic Materials — Specifications
for Individual Materials — Fe-Based
Amorphous Strip Delivered in the
Semi-Processed State
NA Not applicable Not applicable
63 IS 1148: 2009
Steel Rivet Bars (medium And High Tensile) –
For Structural Purposes.
2 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 2062: 2011
Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm).
64 IS 1673: 1984
Specification for Mild Steel Wire, Cold
Heading Quality.
2 IS 7887: 1992 1. Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022
Steels for Cold Heading/ Cold
extrusion application
Part-1 Wrought carbon and low
alloy steels
65 IS 1812: 1982
Specification for Carbon Steel Wire for the
Manufacture of Wood Screws.
1 IS 7887: 1992 Mild steel wire rods for general engineering purposes.
66 IS 2507: 1975
Specification for Cold – rolled Steel Strips for
Springs.
NA Not applicable Not applicable
67 IS 2255: 1977
Specification for Mild Steel Wire Rod for the
Manufacture of Machine Screws (By Cold
Heading Process).
2 IS 7887: 1992 1. Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022
Steels for Cold Heading/ Cold
extrusion application
Part-1 Wrought carbon and low
alloy steels
68 IS 3195: 1992
Steel For the Manufacture of Volute and
Helical Springs (for Railway Rolling Stock) –
Specification.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
69 IS 3431: 1982
Specification for Steel for the manufacture of
volute, helical and laminated springs for
automotive suspension.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 3885 Part-1:
1992
Steel for the manufacture of laminated
springs (railway rolling stock) Part 1: Flat
Sections – Specification.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 3885 Part-2:
1992
Steel for the manufacture of laminated
springs (railway rolling stock) Part 2: Rib and
Groove Sections- Specification.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
72 IS 4223: 1975 Specification for Steel Wire for Umbrella Ribs. 1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
73 IS 4224: 1972
Specification for Steel Wire for Staples, Pins
and Clips.
2 IS 7887 : 1992 Mild steel wire rods for general engineering purposes. IS 7904 : 2018 High Carbon Steel Wire Rods – Specification.
74 IS 4398: 1994
Carbon-chromium Steel for the Manufacture
of Balls, Rollers and Bearing Races-
Specification.
IS 4398: 1994 (for bars, wire rods,
wires)
Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification.
75 IS 6902: 1973 Specification for Steel Wire for spokes. 1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
76 IS 6967: 1973
Specification for Steel for Electrically welded
round Link Chains.
1 IS 6967: 1973 (for bars) Specification for Steel for Electrically welded round Link Chains.
77 IS 7226: 1974
Specification for Cold rolled medium, high
carbon and low alloy steel strip for general
engineering purposes.
NA Not applicable Not applicable
78 IS 7557: 1982
Specification for Steel Wire: (Up to 20 mm)
for the manufacture of cold-forged rivets.
2 IS 7887 : 1992 Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022
Steels for Cold Heading/ Cold
extrusion application
Part-1 Wrought carbon and low
alloy steels
79 IS 9476: 1980
Specification for Cold rolled steel strips for
carbon steel razor blades.
| NA Not applicable Not applicable | |
| 80 IS 9962: 1981 Specification for Steel Wire for Needles. 2 IS 7904: 2018 IS 7887 : 1992 Mild steel wire rods for general engineering purposes. | High Carbon Steel Wire Rods – Specification. |
81 IS 14331: 1995
Steels for High Temperature Bolting
Applications – Specification.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
82 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms
and Slabs for Re- rolling purposes-
Specification.
NA Not applicable Not applicable
83 IS 4882: 1979
Specification for Low Carbon Steel Wire for
Rivets for Use in Bearing Industry.
2 IS 7887 : 1992 Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022
Steels for Cold Heading/ Cold
extrusion application
Part-1 Wrought carbon and low
alloy steels
84 IS 2090: 1983
Specification For High Tensile Steel Bars Used
in Pre-stressed Concrete.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
85 IS 6529: 1996
Stainless Steel Blooms Billets and Slabs for
Forging.
NA Not applicable Not applicable
86 IS 9294: 2023
Cold-Rolled Stainless-Steel Strips for Razor
Blades.
NA Not applicable Not applicable
87 IS 10631: 1983
Stainless steel for welding electrode core
wire.
1 IS 6603: 2024 Stainless Steel Bars and Flats.
88 IS 10632 (Part 2): 1983
Specification for Non-Magnetic stainless
steels for electrical applications:
Part 2 Specific requirements for binding
wire.
NA Not applicable Not applicable
89 IS 10632 (Part 3): 1983
Specifications for Non-Magnetic stainless
steels for electrical applications:
Part 3 Specific requirements for sheets,
strips and plates.
NA Not applicable Not applicable
90 IS 11169 (Part 2) : 2023
Steels for cold heading/ cold extrusion
applications – specification:
Part 2 Stainless steel.
2 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 11169 (Part 2) : 2023 for wires
Steels for cold heading/ cold extrusion applications – specification: Part 2 Stainless steel.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
| IS Number IS Title IS Number IS TitleS.No. | ||
| 91 IS 5651: 1987 Steels for Pneumatic Tools. 2 | IS 1875: 1992 | Carbon steel billets, blooms, slabs and bars for forgings. |
IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
92 IS 9516: 1980 Heat Resisting Steel. 2 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings. IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
93 IS 11952: 1986 Steels For Piston Pins (gudgeon Pins). 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
94 IS 12045: 1987
Alloys Used in Electrical Resistance Metallic
Heating Elements.
IS 12045: 1987 (for cold rolled
strips)
Alloys Used in Electrical Resistance Metallic Heating Elements. IS 14650: 2023 (for hot rolled
strips)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
95 IS 14652: 1999
18 Percent Nickel Maraging Steel Bars and
Rods.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
96 IS 1566: 1982
Specification for Hard-drawn Steel Wire
Fabric for Concrete Reinforcement.
1 IS 432 (Part 2): 1982
Specification for Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire.
97 IS 11946: 1987 Soft Magnetic Iron Strips. 1 IS 11513: 2017 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes.
98 IS 11947: 1987
Soft Magnetic Iron Rods, Bars, Flats and
Sections.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
99 IS 963: 1958
Chrome molybdenum steel bars and rods for
aircraft purposes.
2 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings. IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
100 IS 4454 (Part 4): 2001
Steel Wires for Mechanical Springs - Part 4:
Stainless Steel Wire.
1 IS 6603 : 2024 Stainless Steel Bars and Flats.
101 IS 1993: 2018 Cold-reduced Electrolytic Tin Plate. 1 IS/ISO 11951: 2016 Cold - Reduced Tinmill Products – Blackplate. 102 IS 12591: 2018
Cold reduced electrolytic chromium /
Chromium oxide – coated steel.
1 IS/ISO 11951: 2016 Cold - Reduced Tinmill Products – Blackplate. 103 IS 412: 1975
Specification for Expanded Metal Steel
Sheets for General Purposes.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
104 IS 2100: 1970
Specification for Steel Billets, Bars and
Sections for Boilers.
IS 2100: 1970 (for bars and
sections)
Specification for Steel Billets, Bars and Sections for Boilers. 105 IS 2589: 1975
Specification for Hard Drawn Steel Wire for
Upholstery Springs.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification. 106 IS 3298: 1981
Specification for Mild Steel Rivet Bars for Ship
Building.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
107 IS 4072: 1975 Specification for Steel for Spring Washers. 1 IS 4072: 1975 (for plate, sheet,
wire or rod)
Specification for Steel for Spring Washers.
108 IS 8510 (Part II): 1977
Specification for Tinned Steel Wire for
Banding of Armatures and Rotors:
Part II Specific Requirements for magnetic
banding wires.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification. 109 IS 8510 (Part III): 1977
Specification for Tinned Steel Wire for
Banding of Armatures and Rotors:
Part III Specific Requirements for
non-magnetic banding wires.
1 IS 6603 : 2024 Stainless Steel Bars and Flats.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
110 IS 8563: 1977
Specification for Half Round Mild Steel Wire
for The Manufacture of Split Pins.
1 IS 7887: 1992 Mild steel wire rods for general engineering purposes. 111 IS 8564: 1977
Specification for Steel Wire for Nipples for
Spokes.
NA Not applicable Not applicable
112 IS 8565: 1977 Specification for Heald Wire. 1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification. 113 IS 8566: 1977 Specification for Steel Wire for Reeds. 1 IS 7887: 1992 Mild steel wire rods for general engineering purposes. 114 IS 8917: 1978
Specification for Steel Plates for Galvanizing
Pots.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
115 IS 9442: 1980
Specification for Hot -Rolled Steel Plates,
Sheets and Strips for Manufacture of
Agricultural Tillage Discs.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
116 IS 9485: 1980
Specification For Cold-Reduced and
Hot-Rolled Carbon Steel Sheet for Porcelain
Enamelling.
2 IS 14650: 2023 (for hot rolled)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 9485: 1980 (for cold rolled)
Specification For Cold-Reduced and Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling.
IS 10794:
1984
Specification for Mild Steel Wire for Cotter
Pins.
1 IS 7887: 1992 Mild steel wire rods for general engineering purposes. 118 IS 12262: 1988
Specification for Trapezoidal Steel Wire for
Springs Washers.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
IS 15911:
2010
Structural Steel (Ordinary
Quality)-Specification.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
120 IS 4431: 1978
Specification for Carbon and
Carbon-Manganese Free-Cutting Steels.
1 IS 4431: 1978 (for bars) Specification for Carbon and Carbon-Manganese Free-Cutting Steels. 121 IS 4432: 1988 Specification for Case Hardening Steels. 1 IS 4432: 1988 (for bars and rods) Specification for Case Hardening Steels. 122 IS 5518: 1996
Steels for Die Blocks for Drop Forging
Specification.
1 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings. 123 IS 8748: 1978
Specification for Forged/Rolled CTC
Segments.
2 IS 14650: 2023 (for rolled)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 6529: 1996 (for forged) Stainless Steel Blooms Billets and Slabs for Forging.
IS 12145:
1987
Specification for Quenched and Tempered
Alloy Steel Forgings for Pressure Vessels.
1 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings.
IS 13387:
1992
Tool Steel Forgings for Metal Forming –
Specification.
1 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings.
IS 14698:
1999
Carbon and Low Alloy Billets, Blooms, Slabs
and Bars for Manufacture of Shell Bodies and
Proof Shots Used in Defence Services -
Specification.
NA Not applicable Not applicable
127 IS/ISO 11951: 2016Cold - Reduced Tinmill Products – Blackplate. 1 IS 11513: 2017 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes. 128 IS 3930: 1994
Flame and Induction Hardening Steels –
Specification.
2 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings. 129 IS 5478: 1969
Specification for Thermostat Metal Sheet and
Strip.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
IS 13352:
1992
Stock for Forgings produced from
Continuously Cast Blooms, Billets and Slabs –
Specification.
NA Not applicable Not applicable
131 IS 16644: 2018
Stress-Relieved, Low Relaxation Steel Wire
for Pre-stressed Concrete — Specification.
1 IS 7904: 2018 High Carbon Steel Wire Rods – Specification.
IS 17404:
2020
Electrogalvanized Hot Rolled and Cold
Reduced Carbon Steel Sheets and Strips —
Specification.
4 IS 1079:2017 Hot Rolled Carbon Steel Sheet, Plate and Strip - Specification. IS 5986: 2017 Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. IS 513 (Part-1 ): 2016
Cold reduced carbon steel sheets and strip:
Part 1 Cold Forming and Drawing Purpose.
IS 513 (Part-2): 2016
Cold reduced low carbon steel sheets and strip:
Part 2 High Tensile and Multi- phase Steel.
IS 16732:
2019
Galvanized Structural Steel – Specification. 1 IS 2062: 2011 Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm).
IS 17111:
2019 (ISO
683- 17: 2014)
Heat-Treated Steels Alloy and Free-Cutting
Steels — Ball and Roller Bearing Steels.
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 12594:
1988
Hot-dip Zinc Coating on Structural Steel Bars
for Concrete Reinforcement – Specification.
3 IS 1786: 2008
High strength deformed steel bars and wires for concrete reinforcement- Specification except for High strength deformed steel bars and wires of sizes less than 8 mm. IS 2062: 2011
Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). IS 432 (Part1): 1982
Specification for Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement;
Part 1 Mild steel and medium tensile steel bars
| 136 IS 1170: 1992 Ferrochromium – Specification. | NA | Not applicable | Not applicable |
| 137 IS 1171: 2011 Ferromanganese – Specification. | NA | Not applicable | Not applicable |
| 138 IS 1470: 2013 Silicomanganese – Specification. | NA | Not applicable | Not applicable |
IS 18316:
2023
Hot Rolled and Cold Rolled Steel Strips
Intended For Processing Of Semi/Fully
Processed Non- Grain Oriented Electrical
Steel Or Fully Processed Grain Oriented
Electrical Steel
2 IS 14650: 2023( for hot rolled)
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 18316: 2023 (for cold rolled)
Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully processed Grain Oriented Electrical Steel 140 IS 18384: 2023
Hot-Rolled Steel Strip, Sheet and Plates for
Welded Steel Pipe for Pipeline Transportation
Systems
1 IS 14650: 2023
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 18385:
2023
Hot- Dip galvanized/ galvannealed Steel
Sheet and strips for Automotive Applications
IS 14650: 2023 for hot rolled
substrate
Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification.
IS 11513: 2017 for cold rolled Hot Rolled Carbon Steel Strip for Cold Rolling Purposes.
IS 18513:
2023
Hot-Dip Zinc-Aluminium-Magnesium Alloy
Coated Steel Sheets, Plates and Strips -
Specification
3 IS 1079: 2017 for Hot rolled Hot rolled carbon steel sheet, plate and strip - Specification IS 5986: 2017 for Hot rolled Hot rolled steel sheet, plate and strip for forming and flanging purposes A: Product Number of Possible
standards for input
steel/base material
B: Input for product mentioned at A
IS Number IS Title IS Number IS TitleS.No.
IS 513 (Part 1 & 2) for cold rolled
Cold reduced carbon steel sheet and strip
| 143 IS 1469: 1993 Ferromolybdenum - Specification | NA | Not applicable | Not applicable |
| 144 IS 1466: 1985 Specification for Ferro Vanadium | NA | Not applicable | Not applicable |
Source: Central Board of Indirect Taxes and Customs (CBIC). View the official document.